PCM1798DB vs PCM1794DB तुलना
विस्तृत दोनों ओर की तुलना PCM1798DB द्वारा Texas Instruments और PCM1794DB द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | PCM1798DB | PCM1794DB |
|---|---|---|
| ब्रांड | Texas Instruments | Texas Instruments |
| श्रेणी | ADC/DAC | ADC/DAC |
| लाइफसाइकिल स्थिति | सक्रिय | Unknown |
| Converter Type | Stereo audio digital-to-analog converter | Stereo audio digital-to-analog converter |
| Architecture | Advanced segment DAC | — |
| रेज़ोल्यूशन | 24 bit | — |
| Maximum Sampling Frequency | 200 kHz | — |
| Nominal Audio Sampling Frequency | 192 kHz | — |
| Dynamic Range | 123 dB | 9 V rms mono; 4.5 V rms stereo; 2 V rms stereo |
| THD+N | 0.0005% | 0.0004% typical |
| आउटपुट प्रकार | Differential current output | — |
| Differential Output Current | 4 mAp-p | — |
| Digital Filter Oversampling | 8 times | — |
| Digital Filter Stop-Band Attenuation | -98 dB | — |
| Digital Filter Pass-Band Ripple | ±0.0002 dB | — |
| Supported Sampling Frequency Range | 10 kHz to 200 kHz | — |
| Supported System Clock Ratios | 128fS, 192fS, 256fS, 384fS, 512fS, or 768fS with autodetect | — |
| Process Technology | CMOS | CMOS |
| पैकेज | 28-lead SSOP | 28-lead SSOP |
| माउंटिंग प्रकार | Surface mount | — |
| Pin Compatibility | Compatible with PCM1794 pin assignment | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| ऑपरेटिंग तापमान रेंज | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Data Resolution | — | 24 bit |
| Maximum Sampling Rate | — | 192 kHz |
| DAC Architecture | — | Advanced segment DAC |
| आउटपुट कॉन्फ़िगरेशन | — | Balanced current outputs |
| Digital Audio Interface | — | I2S, PCM, and left-justified |
| Digital Input Tolerance | — | 5 V tolerant |
| Supply Condition for Electrical Characteristics | — | VCC1 = VCC2L = VCC2R = 5 V, VDD = 3.3 V |
| Reference Test Condition | — | TA = 25 degrees C |
| Reference System Clock | — | 256 fS |
| Reference Sampling Rate | — | 44.1 kHz |
| Initialization Requirement | — | 1024 system clock periods after reset |
| Clock Jitter Tolerance | — | Improved tolerance; exact value not stated |