PCM1798DB vs PCM1794DB So sánh
So sánh chi tiết song song của PCM1798DB bằng Texas Instruments và PCM1794DB bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
So sánh thông số kỹ thuật
| Tham số | PCM1798DB | PCM1794DB |
|---|---|---|
| Thương hiệu | Texas Instruments | Texas Instruments |
| Danh mục | ADC/DAC | ADC/DAC |
| Trạng thái vòng đời | Hoạt động | Unknown |
| Converter Type | Stereo audio digital-to-analog converter | Stereo audio digital-to-analog converter |
| Architecture | Advanced segment DAC | — |
| Độ phân giải | 24 bit | — |
| Maximum Sampling Frequency | 200 kHz | — |
| Nominal Audio Sampling Frequency | 192 kHz | — |
| Dynamic Range | 123 dB | 9 V rms mono; 4.5 V rms stereo; 2 V rms stereo |
| THD+N | 0.0005% | 0.0004% typical |
| Kiểu đầu ra | Differential current output | — |
| Differential Output Current | 4 mAp-p | — |
| Digital Filter Oversampling | 8 times | — |
| Digital Filter Stop-Band Attenuation | -98 dB | — |
| Digital Filter Pass-Band Ripple | ±0.0002 dB | — |
| Supported Sampling Frequency Range | 10 kHz to 200 kHz | — |
| Supported System Clock Ratios | 128fS, 192fS, 256fS, 384fS, 512fS, or 768fS with autodetect | — |
| Process Technology | CMOS | CMOS |
| Hộp | 28-lead SSOP | 28-lead SSOP |
| Kiểu lắp đặt | Surface mount | — |
| Pin Compatibility | Compatible with PCM1794 pin assignment | — |
| Trạng thái RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Khoảng nhiệt độ hoạt động | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Data Resolution | — | 24 bit |
| Maximum Sampling Rate | — | 192 kHz |
| DAC Architecture | — | Advanced segment DAC |
| Cấu hình đầu ra | — | Balanced current outputs |
| Digital Audio Interface | — | I2S, PCM, and left-justified |
| Digital Input Tolerance | — | 5 V tolerant |
| Supply Condition for Electrical Characteristics | — | VCC1 = VCC2L = VCC2R = 5 V, VDD = 3.3 V |
| Reference Test Condition | — | TA = 25 degrees C |
| Reference System Clock | — | 256 fS |
| Reference Sampling Rate | — | 44.1 kHz |
| Initialization Requirement | — | 1024 system clock periods after reset |
| Clock Jitter Tolerance | — | Improved tolerance; exact value not stated |