PL2303TA vs PL2303GC Vergleich
Detaillierter Direktvergleich von PL2303TA von Prolific Technology Inc. und PL2303GC von Prolific Technology Inc.. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Prolific Technology Inc.
PL2303TA - USB to Serial Bridge Controller | SSOP-28 | Prolific
PL2303TA ✓ AktivProlific Technology Inc.
PL2303GC - USB to UART Bridge Controller, SSOP-28 | Prolific
PL2303GC ✓ AktivSpezifikationsvergleich
| Parameter | PL2303TA | PL2303GC |
|---|---|---|
| Marke | Prolific Technology Inc. | Prolific Technology Inc. |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,34 | $0,82 |
| Funktion | USB to Serial (UART) Bridge Controller | USB to Full UART Bridge Controller |
| USB Standard | USB 2.0 Full-Speed (12 Mbps) | USB 2.0 Full-Speed (12 Mbps) |
| UART Channels | 1 (TX, RX, RTS, CTS, DTR, DSR, RI, DCD) | — |
| Maximum Baud Rate | 6 Mbps (driver dependent) | [DATA_NEEDED: maximum baud rate] |
| Minimum Baud Rate | 75 bps | — |
| Supply Voltage (VBUS) | 4.5 V to 5.5 V | — |
| Logic I/O Voltage (VDD_232) | 1.8 V to 3.6 V | — |
| Internal LDO Output | 3.3 V | — |
| External EEPROM Required | No (ROM firmware only) | — |
| Betriebstemperaturbereich | -40 C to +85 C | — |
| Gehäuse | SSOP-28 (208 mil) | SSOP-28 |
| Montageart | Surface Mount | Surface Mount |
| RoHS-Status | [DATA_NEEDED: RoHS status confirmation] | Compliant |
| MSL-Level | [DATA_NEEDED: MSL rating] | — |
| Pin-Anzahl | 28 | — |
| Driver Support | Windows (Prolific driver), macOS, Linux kernel pl2303 module | — |
| UART Data Bits | — | 5 / 6 / 7 / 8 |
| UART Stop Bits | — | 1 / 1.5 / 2 |
| UART Parity | — | None / Even / Odd / Mark / Space |
| FIFO Depth | — | 256 bytes (per direction) |
| Flow Control | — | XON/XOFF, RTS/CTS, DTR/DSR |
| Battery Charging Support | — | USB BC1.2 compliant |
| GPIO Pins | — | Multiple (GPIO) |
| Versorgungsspannung | — | 3.3 V |
| Betriebstemperatur | — | -40 C to +85 C |
| External Crystal Required | — | No (internal PLL) |