PL2303TA vs PL2303GC Comparación
Comparación detallada lado a lado de PL2303TA por Prolific Technology Inc. y PL2303GC por Prolific Technology Inc.. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Prolific Technology Inc.
PL2303TA - USB to Serial Bridge Controller | SSOP-28 | Prolific
PL2303TA ✓ ActivoProlific Technology Inc.
PL2303GC - USB to UART Bridge Controller, SSOP-28 | Prolific
PL2303GC ✓ ActivoComparación de especificaciones
| Parámetro | PL2303TA | PL2303GC |
|---|---|---|
| Marca | Prolific Technology Inc. | Prolific Technology Inc. |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $0,34 | $0,82 |
| Función | USB to Serial (UART) Bridge Controller | USB to Full UART Bridge Controller |
| USB Standard | USB 2.0 Full-Speed (12 Mbps) | USB 2.0 Full-Speed (12 Mbps) |
| UART Channels | 1 (TX, RX, RTS, CTS, DTR, DSR, RI, DCD) | — |
| Maximum Baud Rate | 6 Mbps (driver dependent) | [DATA_NEEDED: maximum baud rate] |
| Minimum Baud Rate | 75 bps | — |
| Supply Voltage (VBUS) | 4.5 V to 5.5 V | — |
| Logic I/O Voltage (VDD_232) | 1.8 V to 3.6 V | — |
| Internal LDO Output | 3.3 V | — |
| External EEPROM Required | No (ROM firmware only) | — |
| Rango de temperatura de funcionamiento | -40 C to +85 C | — |
| Encapsulado | SSOP-28 (208 mil) | SSOP-28 |
| Tipo de montaje | Surface Mount | Surface Mount |
| Estado RoHS | [DATA_NEEDED: RoHS status confirmation] | Compliant |
| Nivel MSL | [DATA_NEEDED: MSL rating] | — |
| Recuento de pines | 28 | — |
| Driver Support | Windows (Prolific driver), macOS, Linux kernel pl2303 module | — |
| UART Data Bits | — | 5 / 6 / 7 / 8 |
| UART Stop Bits | — | 1 / 1.5 / 2 |
| UART Parity | — | None / Even / Odd / Mark / Space |
| FIFO Depth | — | 256 bytes (per direction) |
| Flow Control | — | XON/XOFF, RTS/CTS, DTR/DSR |
| Battery Charging Support | — | USB BC1.2 compliant |
| GPIO Pins | — | Multiple (GPIO) |
| Tensión de alimentación | — | 3.3 V |
| Temperatura de funcionamiento | — | -40 C to +85 C |
| External Crystal Required | — | No (internal PLL) |