PL2303TA vs PL2303GC Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng PL2303TA sa pamamagitan ng Prolific Technology Inc. at PL2303GC sa pamamagitan ng Prolific Technology Inc.. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Prolific Technology Inc.
PL2303TA - USB to Serial Bridge Controller | SSOP-28 | Prolific
PL2303TA ✓ NakahandaProlific Technology Inc.
PL2303GC - USB to UART Bridge Controller, SSOP-28 | Prolific
PL2303GC ✓ NakahandaPagsanggunian na paghahambing
| Parametro | PL2303TA | PL2303GC |
|---|---|---|
| Brand | Prolific Technology Inc. | Prolific Technology Inc. |
| Kategorya | Interface ICs | Interface ICs |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Fungsi | USB to Serial (UART) Bridge Controller | USB to Full UART Bridge Controller |
| USB Standard | USB 2.0 Full-Speed (12 Mbps) | USB 2.0 Full-Speed (12 Mbps) |
| UART Channels | 1 (TX, RX, RTS, CTS, DTR, DSR, RI, DCD) | — |
| Maximum Baud Rate | 6 Mbps (driver dependent) | [DATA_NEEDED: maximum baud rate] |
| Minimum Baud Rate | 75 bps | — |
| Supply Voltage (VBUS) | 4.5 V to 5.5 V | — |
| Logic I/O Voltage (VDD_232) | 1.8 V to 3.6 V | — |
| Internal LDO Output | 3.3 V | — |
| External EEPROM Required | No (ROM firmware only) | — |
| Hanay ng Temperature na Operasyon | -40 C to +85 C | — |
| Packhaging | SSOP-28 (208 mil) | SSOP-28 |
| Uri ng Pagpapasok | Surface Mount | Surface Mount |
| Tindminan RoHS | [DATA_NEEDED: RoHS status confirmation] | Compliant |
| Level ng MSL | [DATA_NEEDED: MSL rating] | — |
| Bilang ng Pin | 28 | — |
| Driver Support | Windows (Prolific driver), macOS, Linux kernel pl2303 module | — |
| UART Data Bits | — | 5 / 6 / 7 / 8 |
| UART Stop Bits | — | 1 / 1.5 / 2 |
| UART Parity | — | None / Even / Odd / Mark / Space |
| FIFO Depth | — | 256 bytes (per direction) |
| Flow Control | — | XON/XOFF, RTS/CTS, DTR/DSR |
| Battery Charging Support | — | USB BC1.2 compliant |
| GPIO Pins | — | Multiple (GPIO) |
| Volte ng Pagbibigay | — | 3.3 V |
| Temperature na Operasyon | — | -40 C to +85 C |
| External Crystal Required | — | No (internal PLL) |