PN7160A1HN vs PN7161B1HN Vergleich
Detaillierter Direktvergleich von PN7160A1HN von NXP Semiconductors und PN7161B1HN von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | PN7160A1HN | PN7161B1HN |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | RF Modules | RF Transceivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $2,15 | $5,20 |
| Product Type | NFC Plug and Play Controller | — |
| Operating Frequency | 13.56 MHz | 13.56 MHz |
| Supported Protocols | FeliCa, ISO 14443, ISO 15693, MIFARE, NFC | FeliCa, ISO 14443, ISO 15693, MIFARE, NFC Forum, EMV L1 |
| Host Interface | I2C (default, hardware) / SPI (EEPROM-configurable) | SPI (NCI - NFC Controller Interface) |
| NCI Version | NCI 2.0 (pre-loaded firmware) | — |
| Digital Supply Voltage | 1.65 V to 1.95 V (VDD) | — |
| Analog/RF Supply Voltage | 3.0 V to 3.6 V (VBAT, VBAT_PA) | — |
| I/O Supply Voltage | 1.65 V to 1.95 V (VDDIO) | — |
| I2C Address | 0x28 (7-bit) | — |
| RF Output Power | [DATA_NEEDED: TX output power dBm] | — |
| Antenna Pins | TX1, TX2 (differential); RX1, RX2 | — |
| Integrated MCU Core | ARM Cortex-M0 (ROM-resident NCI firmware) | — |
| Operating Modes | Reader/Writer, Card Emulation (P2P), Tag Detection | — |
| Modes of Operation | Active, Standby, Hard Power Down, Low-Power Polling | — |
| Gehäuse | HVQFN-40 (6 x 6 x 0.85 mm) with Exposed Pad | 40-VFQFN Exposed Pad |
| Montageart | Surface Mount | Surface Mount |
| Peak Reflow Temperature | 260 C (per JEDEC J-STD-020) | 260 C |
| Moisture Sensitivity Level | MSL 3 | — |
| RoHS-Status | Compliant | Compliant |
| Betriebstemperatur | -30 C to +85 C | — |
| Manufacturer | — | NXP Semiconductors |
| Part Number | — | PN7161B1HN |
| Funktion | — | NFC Controller (RFID Reader/Transponder IC) |
| Digital Supply Voltage (VDD) | — | 1.65 V to 1.95 V (typical 1.8 V) |
| RF/Analog Supply Voltage (VBAT) | — | 3.0 V to 3.6 V (typical 3.3 V) |
| Apple ECP Support | — | Yes |
| EMV Compliance | — | EMV L1 Compliant |
| Feuchtigkeitsempfindlichkeitsgrad (MSL) | — | 3 |