PN7160A1HN vs PN7161B1HN 비교
다음의 상세 나란히 비교: PN7160A1HN 제조: NXP Semiconductors 및 PN7161B1HN 제조: NXP Semiconductors. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | PN7160A1HN | PN7161B1HN |
|---|---|---|
| 브랜드 | NXP Semiconductors | NXP Semiconductors |
| 카테고리 | RF Modules | RF Transceivers |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $2.15 | $5.20 |
| Product Type | NFC Plug and Play Controller | — |
| Operating Frequency | 13.56 MHz | 13.56 MHz |
| Supported Protocols | FeliCa, ISO 14443, ISO 15693, MIFARE, NFC | FeliCa, ISO 14443, ISO 15693, MIFARE, NFC Forum, EMV L1 |
| Host Interface | I2C (default, hardware) / SPI (EEPROM-configurable) | SPI (NCI - NFC Controller Interface) |
| NCI Version | NCI 2.0 (pre-loaded firmware) | — |
| Digital Supply Voltage | 1.65 V to 1.95 V (VDD) | — |
| Analog/RF Supply Voltage | 3.0 V to 3.6 V (VBAT, VBAT_PA) | — |
| I/O Supply Voltage | 1.65 V to 1.95 V (VDDIO) | — |
| I2C Address | 0x28 (7-bit) | — |
| RF Output Power | [DATA_NEEDED: TX output power dBm] | — |
| Antenna Pins | TX1, TX2 (differential); RX1, RX2 | — |
| Integrated MCU Core | ARM Cortex-M0 (ROM-resident NCI firmware) | — |
| Operating Modes | Reader/Writer, Card Emulation (P2P), Tag Detection | — |
| Modes of Operation | Active, Standby, Hard Power Down, Low-Power Polling | — |
| 패키지 | HVQFN-40 (6 x 6 x 0.85 mm) with Exposed Pad | 40-VFQFN Exposed Pad |
| 실장 유형 | Surface Mount | Surface Mount |
| Peak Reflow Temperature | 260 C (per JEDEC J-STD-020) | 260 C |
| Moisture Sensitivity Level | MSL 3 | — |
| RoHS 상태 | Compliant | Compliant |
| 동작 온도 | -30 C to +85 C | — |
| Manufacturer | — | NXP Semiconductors |
| Part Number | — | PN7161B1HN |
| 기능 | — | NFC Controller (RFID Reader/Transponder IC) |
| Digital Supply Voltage (VDD) | — | 1.65 V to 1.95 V (typical 1.8 V) |
| RF/Analog Supply Voltage (VBAT) | — | 3.0 V to 3.6 V (typical 3.3 V) |
| Apple ECP Support | — | Yes |
| EMV Compliance | — | EMV L1 Compliant |
| 습도 민감도 레벨 (MSL) | — | 3 |