SN65HVD232DR vs SN65HVD234DR Vergleich
Detaillierter Direktvergleich von SN65HVD232DR von Texas Instruments und SN65HVD234DR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
SN65HVD232DR - 3.3V 1Mbps CAN Transceiver | Texas Instruments
SN65HVD232DR ✓ AktivTexas Instruments
SN65HVD234DR - 3.3V CAN Transceiver 1Mbps w/ Sleep | Texas Instruments
SN65HVD234DR ✓ AktivSpezifikationsvergleich
| Parameter | SN65HVD232DR | SN65HVD234DR |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,00 | $1,30 |
| Product Type | Single-channel CAN transceiver | CAN Bus Transceiver |
| Versorgungsspannung | 3.3 V | — |
| CAN Data Rate | Up to 1 Mbps | — |
| CAN Standard Compatibility | ISO 11898-2 high-speed CAN physical layer | — |
| Bus Nodes | Up to 120 nodes | — |
| Bus-Pin ESD Protection | Exceeds 16 kV HBM | — |
| Gehäuse | 8-pin SOIC | SOIC-8 (D) |
| Betriebstemperatur | -40°C to +85°C | — |
| Supply Voltage Range | [DATA_NEEDED: recommended operating supply-voltage range] | — |
| Logic Input Voltage | [DATA_NEEDED: CAN controller-compatible logic voltage] | — |
| Differential Output Voltage | Comparable between the SN65HVD23x family variants; exact value not stated in verified search data | — |
| Dominant Common-Mode Output | Lower than 5V supplied transceivers by a few hundred millivolts | — |
| Recessive Common-Mode Output Bias | Same as the referenced 5V supplied transceiver family | — |
| Receiver Input Impedance | High; supports up to 120 nodes on a bus | — |
| Driver Output Transition Time | Controlled for improved signal quality | — |
| Unpowered Node Behavior | Does not disturb the CAN bus | — |
| Channel Count | 1 CAN channel | — |
| RoHS-Status | [DATA_NEEDED: RoHS status for this specific orderable part] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status for this specific orderable part] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: automotive qualification status] | — |
| Protocol | — | ISO 11898-1 CAN 2.0A/B |
| Supply Voltage (VCC) | — | 3.0 V to 3.6 V |
| Logic Supply Voltage (VIO) | — | Not required (3.3V logic) |
| Maximum Signaling Rate | — | 1 Mbps |
| Number of Drivers/Receivers | — | 1/1 |
| Bus Fault Protection | — | +/-36 V |
| ESD Protection (Bus Pins, HBM) | — | >16 kV |
| Common-Mode Input Range | — | +/-12 V (extended) |
| Maximum Nodes Supported | — | 120 |
| I/O Logic Level | — | LVTTL, 5V-tolerant |
| Sleep Mode Supply Current | — | 0.05 uA (typical) |
| Standby Mode Supply Current | — | 370 uA (typical) |
| Betriebstemperaturbereich | — | -40C to +125C |
| Montageart | — | Surface Mount |
| Modes of Operation (RS Pin) | — | High-speed, Slope Control, Low-power Standby |
| Dominant Time-Out Protection | — | Yes |
| Thermisches Abschalten | — | Yes |