SN65HVD232DR vs SN65HVD234DR Comparación
Comparación detallada lado a lado de SN65HVD232DR por Texas Instruments y SN65HVD234DR por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
SN65HVD232DR - 3.3V 1Mbps CAN Transceiver | Texas Instruments
SN65HVD232DR ✓ ActivoTexas Instruments
SN65HVD234DR - 3.3V CAN Transceiver 1Mbps w/ Sleep | Texas Instruments
SN65HVD234DR ✓ ActivoComparación de especificaciones
| Parámetro | SN65HVD232DR | SN65HVD234DR |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $0,00 | $1,30 |
| Product Type | Single-channel CAN transceiver | CAN Bus Transceiver |
| Tensión de alimentación | 3.3 V | — |
| CAN Data Rate | Up to 1 Mbps | — |
| CAN Standard Compatibility | ISO 11898-2 high-speed CAN physical layer | — |
| Bus Nodes | Up to 120 nodes | — |
| Bus-Pin ESD Protection | Exceeds 16 kV HBM | — |
| Encapsulado | 8-pin SOIC | SOIC-8 (D) |
| Temperatura de funcionamiento | -40°C to +85°C | — |
| Supply Voltage Range | [DATA_NEEDED: recommended operating supply-voltage range] | — |
| Logic Input Voltage | [DATA_NEEDED: CAN controller-compatible logic voltage] | — |
| Differential Output Voltage | Comparable between the SN65HVD23x family variants; exact value not stated in verified search data | — |
| Dominant Common-Mode Output | Lower than 5V supplied transceivers by a few hundred millivolts | — |
| Recessive Common-Mode Output Bias | Same as the referenced 5V supplied transceiver family | — |
| Receiver Input Impedance | High; supports up to 120 nodes on a bus | — |
| Driver Output Transition Time | Controlled for improved signal quality | — |
| Unpowered Node Behavior | Does not disturb the CAN bus | — |
| Channel Count | 1 CAN channel | — |
| Estado RoHS | [DATA_NEEDED: RoHS status for this specific orderable part] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status for this specific orderable part] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: automotive qualification status] | — |
| Protocol | — | ISO 11898-1 CAN 2.0A/B |
| Supply Voltage (VCC) | — | 3.0 V to 3.6 V |
| Logic Supply Voltage (VIO) | — | Not required (3.3V logic) |
| Maximum Signaling Rate | — | 1 Mbps |
| Number of Drivers/Receivers | — | 1/1 |
| Bus Fault Protection | — | +/-36 V |
| ESD Protection (Bus Pins, HBM) | — | >16 kV |
| Common-Mode Input Range | — | +/-12 V (extended) |
| Maximum Nodes Supported | — | 120 |
| I/O Logic Level | — | LVTTL, 5V-tolerant |
| Sleep Mode Supply Current | — | 0.05 uA (typical) |
| Standby Mode Supply Current | — | 370 uA (typical) |
| Rango de temperatura de funcionamiento | — | -40C to +125C |
| Tipo de montaje | — | Surface Mount |
| Modes of Operation (RS Pin) | — | High-speed, Slope Control, Low-power Standby |
| Dominant Time-Out Protection | — | Yes |
| Apagado térmico | — | Yes |