SN65HVD3085EDR vs SN65LBC176DR Vergleich
Detaillierter Direktvergleich von SN65HVD3085EDR von Texas Instruments und SN65LBC176DR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
SN65LBC176DR - 10Mbps RS-485 Transceiver 5V | Texas Instruments
SN65LBC176DR ✓ AktivSpezifikationsvergleich
| Parameter | SN65HVD3085EDR | SN65LBC176DR |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,32 | $1,27 |
| Protocol | RS-485, RS-422 (TIA/EIA-485A compliant) | — |
| Duplex Mode | Half-duplex | — |
| Number of Drivers / Receivers | 1 / 1 | — |
| Versorgungsspannung | 4.5 V to 5.5 V | 5 V (nominal) |
| Signaling Rate | Up to 20 Mbps | 10 Mbps (max) |
| Betriebstemperatur | -40C to +85C | -40C to +85C |
| Gehäuse | SOIC (D), 8 pins | 8-SOIC (D), 3.90 mm width |
| Montageart | Surface Mount | Surface Mount |
| Receiver Hysteresis | Specified in manufacturer datasheet | — |
| Bus Pin ESD / Fault Tolerance | Per TIA/EIA-485A requirements | — |
| Driver Output Transition Time | Controlled (slew-limited for long cables) | — |
| Isolation | None (non-isolated) | — |
| Funktion | Low-power half-duplex RS-485 transceiver | Half-duplex RS-485/RS-422 transceiver |
| Standard Packaging | Tape & Reel (R suffix) | — |
| RoHS-Status | Compliant (per Abacus Technologies listing) | Compliant |
| REACH Status | Compliant (per Abacus Technologies listing) | — |
| Duplex | — | Half |
| Transmitters / Receivers | — | 1 / 1 |
| Protocol Compliance | — | ANSI TIA/EIA-485 (RS-485), ISO 8482:1987 (E) |
| Fault Protection | — | -10 V to 15 V common-mode bus range |
| Driver Enable | — | DE, active-high |
| Receiver Enable | — | RE, active-low |
| Technology | — | LinBiCMOS, low skew |
| Anzahl der Pins | — | 8 |
| Bus Loading | — | Up to 32 unit loads (multipoint) |