SN65HVD51D vs THVD1451DRBR Vergleich
Detaillierter Direktvergleich von SN65HVD51D von Texas Instruments und THVD1451DRBR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
SN65HVD51D - 5Mbps Full-Duplex RS-485 Transceiver | Texas Instruments
SN65HVD51D ✓ Aktiv
Spezifikationsvergleich
| Parameter | SN65HVD51D | THVD1451DRBR |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | RS-422/RS-485 full-duplex transceiver | — |
| Driver Count | 1 driver | — |
| Receiver Count | 1 receiver | — |
| Maximum Signaling Rate | 5 Mbps | — |
| Supply Voltage Range | 4.5 V to 5.5 V | 3.0 V to 5.5 V |
| Interface Standards | RS-422 and RS-485 | — |
| Duplex Mode | Full-duplex | — |
| Receiver Unit Load | 1/8 unit load | — |
| Maximum Bus Nodes | Up to 256 nodes | — |
| Bus-Pin ESD Protection | Exceeds 15 kV HBM | — |
| Available Driver Transition Rates | 1 Mbps, 5 Mbps, and 25 Mbps | — |
| Standby Current | Less than 1 µA | — |
| Betriebstemperaturbereich | -40 °C to 85 °C | -40 °C to +125 °C |
| Gehäuse | 8-pin SOIC (D) | VSON-8 (DRB) 3x3 mm with exposed thermal pad |
| Montageart | Surface mount | Surface Mount |
| Enable Architecture | Fully enabled; no external enable pins | — |
| RoHS-Status | [DATA_NEEDED: RoHS compliance status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| Funktion | — | RS-485 transceiver (1 driver / 1 receiver) |
| Protocol | — | RS-485 / RS-422 |
| Signaling Rate (Maximum) | — | 50 Mbps |
| Number of Nodes on Bus | — | Up to 256 (1/8 unit load) |
| IEC 61000-4-2 Contact Discharge ESD | — | ±18 kV (bus pins) |
| IEC 61000-4-2 Air-Gap Discharge ESD | — | ±8 kV (bus pins) |
| IEC 61000-4-4 EFT | — | ±4 kV |
| Common-Mode Voltage Range | — | -7 V to +12 V |
| Receiver Input Hysteresis | — | 30 mV (typical) |
| Standby / Shutdown Current | — | < 5 µA |
| MSL Moisture Sensitivity | — | MSL 1 |
| Anzahl der Pins | — | 8 |
| Duplex | — | Half-Duplex |