SN65HVD51D vs THVD1451DRBR Comparaison
Comparaison détaillée côte à côte de SN65HVD51D par Texas Instruments et THVD1451DRBR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
SN65HVD51D - 5Mbps Full-Duplex RS-485 Transceiver | Texas Instruments
SN65HVD51D ✓ Actif
Comparaison des spécifications
| Paramètre | SN65HVD51D | THVD1451DRBR |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | RS-422/RS-485 full-duplex transceiver | — |
| Driver Count | 1 driver | — |
| Receiver Count | 1 receiver | — |
| Maximum Signaling Rate | 5 Mbps | — |
| Supply Voltage Range | 4.5 V to 5.5 V | 3.0 V to 5.5 V |
| Interface Standards | RS-422 and RS-485 | — |
| Duplex Mode | Full-duplex | — |
| Receiver Unit Load | 1/8 unit load | — |
| Maximum Bus Nodes | Up to 256 nodes | — |
| Bus-Pin ESD Protection | Exceeds 15 kV HBM | — |
| Available Driver Transition Rates | 1 Mbps, 5 Mbps, and 25 Mbps | — |
| Standby Current | Less than 1 µA | — |
| Plage de température de fonctionnement | -40 °C to 85 °C | -40 °C to +125 °C |
| Boîtier | 8-pin SOIC (D) | VSON-8 (DRB) 3x3 mm with exposed thermal pad |
| Type de montage | Surface mount | Surface Mount |
| Enable Architecture | Fully enabled; no external enable pins | — |
| Statut RoHS | [DATA_NEEDED: RoHS compliance status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| Fonction | — | RS-485 transceiver (1 driver / 1 receiver) |
| Protocol | — | RS-485 / RS-422 |
| Signaling Rate (Maximum) | — | 50 Mbps |
| Number of Nodes on Bus | — | Up to 256 (1/8 unit load) |
| IEC 61000-4-2 Contact Discharge ESD | — | ±18 kV (bus pins) |
| IEC 61000-4-2 Air-Gap Discharge ESD | — | ±8 kV (bus pins) |
| IEC 61000-4-4 EFT | — | ±4 kV |
| Common-Mode Voltage Range | — | -7 V to +12 V |
| Receiver Input Hysteresis | — | 30 mV (typical) |
| Standby / Shutdown Current | — | < 5 µA |
| MSL Moisture Sensitivity | — | MSL 1 |
| Nombre de broches | — | 8 |
| Duplex | — | Half-Duplex |