SN65HVD51D vs THVD1451DRBR Comparación
Comparación detallada lado a lado de SN65HVD51D por Texas Instruments y THVD1451DRBR por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
SN65HVD51D - 5Mbps Full-Duplex RS-485 Transceiver | Texas Instruments
SN65HVD51D ✓ Activo
Comparación de especificaciones
| Parámetro | SN65HVD51D | THVD1451DRBR |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Product Type | RS-422/RS-485 full-duplex transceiver | — |
| Driver Count | 1 driver | — |
| Receiver Count | 1 receiver | — |
| Maximum Signaling Rate | 5 Mbps | — |
| Supply Voltage Range | 4.5 V to 5.5 V | 3.0 V to 5.5 V |
| Interface Standards | RS-422 and RS-485 | — |
| Duplex Mode | Full-duplex | — |
| Receiver Unit Load | 1/8 unit load | — |
| Maximum Bus Nodes | Up to 256 nodes | — |
| Bus-Pin ESD Protection | Exceeds 15 kV HBM | — |
| Available Driver Transition Rates | 1 Mbps, 5 Mbps, and 25 Mbps | — |
| Standby Current | Less than 1 µA | — |
| Rango de temperatura de funcionamiento | -40 °C to 85 °C | -40 °C to +125 °C |
| Encapsulado | 8-pin SOIC (D) | VSON-8 (DRB) 3x3 mm with exposed thermal pad |
| Tipo de montaje | Surface mount | Surface Mount |
| Enable Architecture | Fully enabled; no external enable pins | — |
| Estado RoHS | [DATA_NEEDED: RoHS compliance status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| Función | — | RS-485 transceiver (1 driver / 1 receiver) |
| Protocol | — | RS-485 / RS-422 |
| Signaling Rate (Maximum) | — | 50 Mbps |
| Number of Nodes on Bus | — | Up to 256 (1/8 unit load) |
| IEC 61000-4-2 Contact Discharge ESD | — | ±18 kV (bus pins) |
| IEC 61000-4-2 Air-Gap Discharge ESD | — | ±8 kV (bus pins) |
| IEC 61000-4-4 EFT | — | ±4 kV |
| Common-Mode Voltage Range | — | -7 V to +12 V |
| Receiver Input Hysteresis | — | 30 mV (typical) |
| Standby / Shutdown Current | — | < 5 µA |
| MSL Moisture Sensitivity | — | MSL 1 |
| Número de pines | — | 8 |
| Duplex | — | Half-Duplex |