SN65HVD75D vs THVD1450 Vergleich
Detaillierter Direktvergleich von SN65HVD75D von Texas Instruments und THVD1450 von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
SN65HVD75D - 3.3V 20Mbps RS-485 Transceiver | Texas Instruments
SN65HVD75D ✓ AktivTexas Instruments
THVD1450 - 50 Mbps RS-485 Transceiver, ±18 kV ESD | Texas Instruments
THVD1450 ✓ AktivSpezifikationsvergleich
| Parameter | SN65HVD75D | THVD1450 |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | Half-duplex RS-485 transceiver | RS-485/RS-422 Transceiver |
| Versorgungsspannung | 3.3 V | — |
| Maximum Signaling Rate | 20 Mbps | — |
| Logic Input Compatibility | 5 V tolerant; compatible with 3.3 V or 5 V controllers | — |
| ESD Protection | IEC ESD protection on bus pins | — |
| ESD Test Model | Human Body Model and IEC Contact Discharge | — |
| Betriebstemperaturbereich | -40°C to 125°C | -40 °C to +125 °C |
| Gehäuse | 8-pin SOIC (D) | 8-SOIC (D) |
| Montageart | Surface mount | — |
| Driver and Receiver Architecture | One differential driver and one differential receiver | — |
| Duplex Mode | Half-duplex | — |
| Bus Standards | RS-485 and RS-422 compatible transceiver | — |
| Recommended Supply Bypass | 100 nF ceramic capacitor | — |
| Recommended 3.3 V Regulator | TPS76333 | — |
| Recommended Isolated Supply Reference | SN6501 | — |
| RoHS-Status | [DATA_NEEDED: RoHS compliance status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Manufacturer | — | Texas Instruments |
| Data Rate (Maximum) | — | 50 Mbps |
| Supply Voltage Range | — | 3 V to 5.5 V |
| Number of Drivers / Receivers | — | 1 / 1 |
| Duplex | — | Half |
| ESD Protection (Bus Pins, IEC Air) | — | ±18 kV (HBM, IEC 61000-4-2) |
| ESD Protection (Contact, IEC) | — | ±8 kV |
| Common-Mode Voltage Range | — | -7 V to +12 V |
| Differential Output Swing (Typical) | — | 1.5 V into 54 Ω |
| Fail-Safe Biasing | — | Open, short, idle |
| Number of Nodes (Unit Loads) | — | 256 (1/8 UL) |
| Logic Family Compatibility | — | 3.3 V and 5 V MCU / UART |
| Hot-Plug Support | — | Yes (glitch-free power-up) |