SN65HVD75D vs THVD1450 Comparação
Comparação detalhada lado a lado de SN65HVD75D por Texas Instruments e THVD1450 por Texas Instruments. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Texas Instruments
SN65HVD75D - 3.3V 20Mbps RS-485 Transceiver | Texas Instruments
SN65HVD75D ✓ AtivoTexas Instruments
THVD1450 - 50 Mbps RS-485 Transceiver, ±18 kV ESD | Texas Instruments
THVD1450 ✓ AtivoComparação de especificações
| Parâmetro | SN65HVD75D | THVD1450 |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoria | Interface ICs | Interface ICs |
| Status do ciclo de vida | Ativo | Ativo |
| Product Type | Half-duplex RS-485 transceiver | RS-485/RS-422 Transceiver |
| Tensão de alimentação | 3.3 V | — |
| Maximum Signaling Rate | 20 Mbps | — |
| Logic Input Compatibility | 5 V tolerant; compatible with 3.3 V or 5 V controllers | — |
| ESD Protection | IEC ESD protection on bus pins | — |
| ESD Test Model | Human Body Model and IEC Contact Discharge | — |
| Faixa de temperatura de operação | -40°C to 125°C | -40 °C to +125 °C |
| Encapsulamento | 8-pin SOIC (D) | 8-SOIC (D) |
| Tipo de montagem | Surface mount | — |
| Driver and Receiver Architecture | One differential driver and one differential receiver | — |
| Duplex Mode | Half-duplex | — |
| Bus Standards | RS-485 and RS-422 compatible transceiver | — |
| Recommended Supply Bypass | 100 nF ceramic capacitor | — |
| Recommended 3.3 V Regulator | TPS76333 | — |
| Recommended Isolated Supply Reference | SN6501 | — |
| Status RoHS | [DATA_NEEDED: RoHS compliance status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Manufacturer | — | Texas Instruments |
| Data Rate (Maximum) | — | 50 Mbps |
| Supply Voltage Range | — | 3 V to 5.5 V |
| Number of Drivers / Receivers | — | 1 / 1 |
| Duplex | — | Half |
| ESD Protection (Bus Pins, IEC Air) | — | ±18 kV (HBM, IEC 61000-4-2) |
| ESD Protection (Contact, IEC) | — | ±8 kV |
| Common-Mode Voltage Range | — | -7 V to +12 V |
| Differential Output Swing (Typical) | — | 1.5 V into 54 Ω |
| Fail-Safe Biasing | — | Open, short, idle |
| Number of Nodes (Unit Loads) | — | 256 (1/8 UL) |
| Logic Family Compatibility | — | 3.3 V and 5 V MCU / UART |
| Hot-Plug Support | — | Yes (glitch-free power-up) |