SN65HVD75D vs THVD1450 Comparaison
Comparaison détaillée côte à côte de SN65HVD75D par Texas Instruments et THVD1450 par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
SN65HVD75D - 3.3V 20Mbps RS-485 Transceiver | Texas Instruments
SN65HVD75D ✓ ActifTexas Instruments
THVD1450 - 50 Mbps RS-485 Transceiver, ±18 kV ESD | Texas Instruments
THVD1450 ✓ ActifComparaison des spécifications
| Paramètre | SN65HVD75D | THVD1450 |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Half-duplex RS-485 transceiver | RS-485/RS-422 Transceiver |
| Tension d'alimentation | 3.3 V | — |
| Maximum Signaling Rate | 20 Mbps | — |
| Logic Input Compatibility | 5 V tolerant; compatible with 3.3 V or 5 V controllers | — |
| ESD Protection | IEC ESD protection on bus pins | — |
| ESD Test Model | Human Body Model and IEC Contact Discharge | — |
| Plage de température de fonctionnement | -40°C to 125°C | -40 °C to +125 °C |
| Boîtier | 8-pin SOIC (D) | 8-SOIC (D) |
| Type de montage | Surface mount | — |
| Driver and Receiver Architecture | One differential driver and one differential receiver | — |
| Duplex Mode | Half-duplex | — |
| Bus Standards | RS-485 and RS-422 compatible transceiver | — |
| Recommended Supply Bypass | 100 nF ceramic capacitor | — |
| Recommended 3.3 V Regulator | TPS76333 | — |
| Recommended Isolated Supply Reference | SN6501 | — |
| Statut RoHS | [DATA_NEEDED: RoHS compliance status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Manufacturer | — | Texas Instruments |
| Data Rate (Maximum) | — | 50 Mbps |
| Supply Voltage Range | — | 3 V to 5.5 V |
| Number of Drivers / Receivers | — | 1 / 1 |
| Duplex | — | Half |
| ESD Protection (Bus Pins, IEC Air) | — | ±18 kV (HBM, IEC 61000-4-2) |
| ESD Protection (Contact, IEC) | — | ±8 kV |
| Common-Mode Voltage Range | — | -7 V to +12 V |
| Differential Output Swing (Typical) | — | 1.5 V into 54 Ω |
| Fail-Safe Biasing | — | Open, short, idle |
| Number of Nodes (Unit Loads) | — | 256 (1/8 UL) |
| Logic Family Compatibility | — | 3.3 V and 5 V MCU / UART |
| Hot-Plug Support | — | Yes (glitch-free power-up) |