SP485ECP-L vs SP485E Vergleich
Detaillierter Direktvergleich von SP485ECP-L von Exar Corporation und SP485E von MaxLinear. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Exar Corporation
SP485ECP-L - RS-485 Transceiver | Exar | Industrial Communication
SP485ECP-L ✓ AktivMaxLinear
SP485E - Enhanced Low Power Half-Duplex RS-485/RS-422 Transceiver | MaxLinear
SP485E ✓ AktivSpezifikationsvergleich
| Parameter | SP485ECP-L | SP485E |
|---|---|---|
| Marke | Exar Corporation | MaxLinear |
| Kategorie | RS-485 Transceivers | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | RS-485 transceiver | — |
| Number of Channels | 1 channel | — |
| Interface Standard | RS-485 | — |
| Versorgungsspannung | [DATA_NEEDED: supply voltage] | — |
| Maximum Data Rate | [DATA_NEEDED: maximum data rate] | — |
| Differential Output Voltage | [DATA_NEEDED: differential output voltage] | — |
| Receiver Sensitivity | [DATA_NEEDED: receiver sensitivity] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| Bus Load Current | [DATA_NEEDED: bus load current] | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature] |
| Gehäuse | [DATA_NEEDED: exact package and pin count] | 8-pin NSOIC or PDIP |
| Montageart | Surface Mount | Surface Mount (NSOIC) or Through-Hole (PDIP) |
| ESD Protection | [DATA_NEEDED: ESD protection rating] | — |
| RoHS-Status | unknown | Compliant |
| REACH Status | unknown | — |
| Lead-Free Status | unknown | — |
| Halogen-Free Status | unknown | — |
| AEC-Q100 Qualification | not_applicable | — |
| Manufacturer | Exar | — |
| Funktion | — | Transceiver |
| Protocol | — | RS-485, RS-422 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half-duplex |
| Datenrate | — | 2.5 Mbps (max, SP485E non-slew-limited) |
| Supply Voltage (VCC) | — | 4.75 V to 5.25 V |
| Receiver Input Sensitivity | — | ±200 mV |
| Receiver Input Impedance | — | 12 kΩ minimum, 15 kΩ typical |
| Common-Mode Range | — | −7 V to +12 V |
| ESD Protection (HBM) | — | ±15 kV |
| ESD Protection (IEC 61000-4-2 Air Discharge) | — | ±15 kV |
| Process Technology | — | BiCMOS |
| Failsafe Receiver | — | Yes (open, shorted, idle bus) |
| Tri-State Enable Pins | — | Yes (DE, RE) |