SP485ECP-L vs SP485E Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng SP485ECP-L sa pamamagitan ng Exar Corporation at SP485E sa pamamagitan ng MaxLinear. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Exar Corporation
SP485ECP-L - RS-485 Transceiver | Exar | Industrial Communication
SP485ECP-L ✓ NakahandaMaxLinear
SP485E - Enhanced Low Power Half-Duplex RS-485/RS-422 Transceiver | MaxLinear
SP485E ✓ NakahandaPagsanggunian na paghahambing
| Parametro | SP485ECP-L | SP485E |
|---|---|---|
| Brand | Exar Corporation | MaxLinear |
| Kategorya | RS-485 Transceivers | Interface ICs |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Product Type | RS-485 transceiver | — |
| Number of Channels | 1 channel | — |
| Interface Standard | RS-485 | — |
| Volte ng Pagbibigay | [DATA_NEEDED: supply voltage] | — |
| Maximum Data Rate | [DATA_NEEDED: maximum data rate] | — |
| Differential Output Voltage | [DATA_NEEDED: differential output voltage] | — |
| Receiver Sensitivity | [DATA_NEEDED: receiver sensitivity] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| Bus Load Current | [DATA_NEEDED: bus load current] | — |
| Hanay ng Temperature na Operasyon | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature] |
| Packhaging | [DATA_NEEDED: exact package and pin count] | 8-pin NSOIC or PDIP |
| Uri ng Pagpapasok | Surface Mount | Surface Mount (NSOIC) or Through-Hole (PDIP) |
| ESD Protection | [DATA_NEEDED: ESD protection rating] | — |
| Tindminan RoHS | unknown | Compliant |
| REACH Status | unknown | — |
| Lead-Free Status | unknown | — |
| Halogen-Free Status | unknown | — |
| AEC-Q100 Qualification | not_applicable | — |
| Manufacturer | Exar | — |
| Fungsi | — | Transceiver |
| Protocol | — | RS-485, RS-422 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half-duplex |
| Rate ng Data | — | 2.5 Mbps (max, SP485E non-slew-limited) |
| Supply Voltage (VCC) | — | 4.75 V to 5.25 V |
| Receiver Input Sensitivity | — | ±200 mV |
| Receiver Input Impedance | — | 12 kΩ minimum, 15 kΩ typical |
| Common-Mode Range | — | −7 V to +12 V |
| ESD Protection (HBM) | — | ±15 kV |
| ESD Protection (IEC 61000-4-2 Air Discharge) | — | ±15 kV |
| Process Technology | — | BiCMOS |
| Failsafe Receiver | — | Yes (open, shorted, idle bus) |
| Tri-State Enable Pins | — | Yes (DE, RE) |