SP485ECP-L vs SP485E 比較

詳細な並列比較: SP485ECP-L メーカー: Exar Corporation および SP485E メーカー: MaxLinear。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

Exar Corporation
SP485ECP-L SP485ECP-L - RS-485 Transceiver | Exar | Industrial Communication

SP485ECP-L - RS-485 Transceiver | Exar | Industrial Communication

SP485ECP-L ✓ 生産中

仕様比較

パラメータ SP485ECP-L SP485E
ブランド Exar Corporation MaxLinear
カテゴリ RS-485 Transceivers Interface ICs
ライフサイクル状態 有効 有効
Product Type RS-485 transceiver —
Number of Channels 1 channel —
Interface Standard RS-485 —
電源電圧 [DATA_NEEDED: supply voltage] —
Maximum Data Rate [DATA_NEEDED: maximum data rate] —
Differential Output Voltage [DATA_NEEDED: differential output voltage] —
Receiver Sensitivity [DATA_NEEDED: receiver sensitivity] —
Common-Mode Voltage Range [DATA_NEEDED: common-mode voltage range] —
Bus Load Current [DATA_NEEDED: bus load current] —
動作温度範囲 [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature]
パッケージ [DATA_NEEDED: exact package and pin count] 8-pin NSOIC or PDIP
実装タイプ Surface Mount Surface Mount (NSOIC) or Through-Hole (PDIP)
ESD Protection [DATA_NEEDED: ESD protection rating] —
RoHS ステータス unknown Compliant
REACH Status unknown —
Lead-Free Status unknown —
Halogen-Free Status unknown —
AEC-Q100 Qualification not_applicable —
Manufacturer Exar —
機能 — Transceiver
Protocol — RS-485, RS-422
Number of Drivers/Receivers — 1/1
Duplex — Half-duplex
データレート — 2.5 Mbps (max, SP485E non-slew-limited)
Supply Voltage (VCC) — 4.75 V to 5.25 V
Receiver Input Sensitivity — ±200 mV
Receiver Input Impedance — 12 kΩ minimum, 15 kΩ typical
Common-Mode Range — −7 V to +12 V
ESD Protection (HBM) — ±15 kV
ESD Protection (IEC 61000-4-2 Air Discharge) — ±15 kV
Process Technology — BiCMOS
Failsafe Receiver — Yes (open, shorted, idle bus)
Tri-State Enable Pins — Yes (DE, RE)

データシート&リソース

SP485ECP-L

データシートはありません

製品の詳細をすべて見る →

すべての製品を閲覧 BOMを作成 見積もり依頼