STM32F429VIT6TR vs STM32F429VGT6 Vergleich
Detaillierter Direktvergleich von STM32F429VIT6TR von STMicroelectronics und STM32F429VGT6 von STMicroelectronics. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
STMicroelectronics
STM32F429VIT6TR - 180MHz Cortex-M4 2MB MCU | STMicroelectronics (Tape & Reel)
STM32F429VIT6TR UnknownSTMicroelectronics
STM32F429VGT6 - 180MHz Cortex-M4 MCU 1MB Flash LQFP-100 | ST (Tape & Reel)
STM32F429VGT6 ✓ AktivSpezifikationsvergleich
| Parameter | STM32F429VIT6TR | STM32F429VGT6 |
|---|---|---|
| Marke | STMicroelectronics | STMicroelectronics |
| Kategorie | Microcontrollers | Microcontrollers |
| Lebenszyklusstatus | Unknown | Aktiv |
| Product Type | 32-bit ARM Cortex-M4 microcontroller | — |
| Maximum CPU Frequency | 180 MHz | — |
| Core | ARM Cortex-M4 with FPU | ARM Cortex-M4 with FPU and DSP instructions |
| Flash Memory | 2 MB | 1 MB |
| Flash Organization | 2M x 8 bits | — |
| System SRAM | 256 KB | — |
| Backup SRAM | 4 KB | — |
| Performance | 225 DMIPS | — |
| Performance per Frequency | 1.25 DMIPS/MHz | — |
| Architecture | 32-bit RISC | — |
| Floating-Point Support | Single-precision FPU | — |
| DSP Instructions | Supported | — |
| Memory Protection Unit | Supported | — |
| Flash Accelerator | ART Accelerator, zero-wait-state execution | — |
| Gehäuse | 100-pin LQFP, 14 x 14 mm | LQFP-100 (14 x 14 mm) |
| Montageart | Surface mount | Surface Mount |
| Nominal Supply | 2.5 V or 3.3 V | — |
| LCD Interface | Parallel LCD interface | — |
| Betriebstemperatur | [DATA_NEEDED: operating temperature range] | -40 C to +85 C (grade 6) |
| RoHS-Status | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| CPU Maximum Frequency | — | 180 MHz |
| DMIPS Performance | — | 225 DMIPS (1.25 DMIPS/MHz, Dhrystone 2.1) |
| SRAM | — | 192 KB (including 4 KB backup SRAM) |
| Operating Voltage | — | 1.8 V to 3.6 V |
| ART Accelerator | — | Yes (0-wait-state Flash execution) |
| MPU | — | Yes (memory protection unit) |
| LCD-TFT Controller | — | Yes, up to XGA resolution |
| DMA2D (Chrom-ART) | — | Yes |
| USB OTG | — | HS + FS (with on-chip PHY) |
| Ethernet MAC | — | 10/100 with IEEE 1588v2 |
| CAN Controllers | — | 2 x CAN 2.0B active |
| ADC | — | 3 x 12-bit, up to 2.4 MSPS |
| DAC | — | 2 x 12-bit |
| Timers | — | 17 (including 12 x 16-bit, 2 x 32-bit) |
| GPIOs | — | Up to 82 fast GPIOs |
| Crypto/Hash Accelerator | — | AES-128/192/256, SHA-1, MD5, 3DES |
| SDMMC | — | 1 x SDMMC host |
| Communication Peripherals | — | UART, SPI, I2C, SAI, SPDIF-Rx |
| MSL-Level | — | 3 (168 hours) |