STM32F429VIT6TR vs STM32F429VGT6 Comparaison
Comparaison détaillée côte à côte de STM32F429VIT6TR par STMicroelectronics et STM32F429VGT6 par STMicroelectronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
STMicroelectronics
STM32F429VIT6TR - 180MHz Cortex-M4 2MB MCU | STMicroelectronics (Tape & Reel)
STM32F429VIT6TR UnknownSTMicroelectronics
STM32F429VGT6 - 180MHz Cortex-M4 MCU 1MB Flash LQFP-100 | ST (Tape & Reel)
STM32F429VGT6 ✓ ActifComparaison des spécifications
| Paramètre | STM32F429VIT6TR | STM32F429VGT6 |
|---|---|---|
| Marque | STMicroelectronics | STMicroelectronics |
| Catégorie | Microcontrollers | Microcontrollers |
| Statut du cycle de vie | Unknown | Actif |
| Product Type | 32-bit ARM Cortex-M4 microcontroller | — |
| Maximum CPU Frequency | 180 MHz | — |
| Core | ARM Cortex-M4 with FPU | ARM Cortex-M4 with FPU and DSP instructions |
| Flash Memory | 2 MB | 1 MB |
| Flash Organization | 2M x 8 bits | — |
| System SRAM | 256 KB | — |
| Backup SRAM | 4 KB | — |
| Performance | 225 DMIPS | — |
| Performance per Frequency | 1.25 DMIPS/MHz | — |
| Architecture | 32-bit RISC | — |
| Floating-Point Support | Single-precision FPU | — |
| DSP Instructions | Supported | — |
| Memory Protection Unit | Supported | — |
| Flash Accelerator | ART Accelerator, zero-wait-state execution | — |
| Boîtier | 100-pin LQFP, 14 x 14 mm | LQFP-100 (14 x 14 mm) |
| Type de montage | Surface mount | Surface Mount |
| Nominal Supply | 2.5 V or 3.3 V | — |
| LCD Interface | Parallel LCD interface | — |
| Température de fonctionnement | [DATA_NEEDED: operating temperature range] | -40 C to +85 C (grade 6) |
| Statut RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| CPU Maximum Frequency | — | 180 MHz |
| DMIPS Performance | — | 225 DMIPS (1.25 DMIPS/MHz, Dhrystone 2.1) |
| SRAM | — | 192 KB (including 4 KB backup SRAM) |
| Operating Voltage | — | 1.8 V to 3.6 V |
| ART Accelerator | — | Yes (0-wait-state Flash execution) |
| MPU | — | Yes (memory protection unit) |
| LCD-TFT Controller | — | Yes, up to XGA resolution |
| DMA2D (Chrom-ART) | — | Yes |
| USB OTG | — | HS + FS (with on-chip PHY) |
| Ethernet MAC | — | 10/100 with IEEE 1588v2 |
| CAN Controllers | — | 2 x CAN 2.0B active |
| ADC | — | 3 x 12-bit, up to 2.4 MSPS |
| DAC | — | 2 x 12-bit |
| Timers | — | 17 (including 12 x 16-bit, 2 x 32-bit) |
| GPIOs | — | Up to 82 fast GPIOs |
| Crypto/Hash Accelerator | — | AES-128/192/256, SHA-1, MD5, 3DES |
| SDMMC | — | 1 x SDMMC host |
| Communication Peripherals | — | UART, SPI, I2C, SAI, SPDIF-Rx |
| Niveau MSL | — | 3 (168 hours) |