STM32F429VIT6TR vs STM32F429VGT6 Comparação
Comparação detalhada lado a lado de STM32F429VIT6TR por STMicroelectronics e STM32F429VGT6 por STMicroelectronics. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
STMicroelectronics
STM32F429VIT6TR - 180MHz Cortex-M4 2MB MCU | STMicroelectronics (Tape & Reel)
STM32F429VIT6TR UnknownSTMicroelectronics
STM32F429VGT6 - 180MHz Cortex-M4 MCU 1MB Flash LQFP-100 | ST (Tape & Reel)
STM32F429VGT6 ✓ AtivoComparação de especificações
| Parâmetro | STM32F429VIT6TR | STM32F429VGT6 |
|---|---|---|
| Marca | STMicroelectronics | STMicroelectronics |
| Categoria | Microcontrollers | Microcontrollers |
| Status do ciclo de vida | Unknown | Ativo |
| Product Type | 32-bit ARM Cortex-M4 microcontroller | — |
| Maximum CPU Frequency | 180 MHz | — |
| Core | ARM Cortex-M4 with FPU | ARM Cortex-M4 with FPU and DSP instructions |
| Flash Memory | 2 MB | 1 MB |
| Flash Organization | 2M x 8 bits | — |
| System SRAM | 256 KB | — |
| Backup SRAM | 4 KB | — |
| Performance | 225 DMIPS | — |
| Performance per Frequency | 1.25 DMIPS/MHz | — |
| Architecture | 32-bit RISC | — |
| Floating-Point Support | Single-precision FPU | — |
| DSP Instructions | Supported | — |
| Memory Protection Unit | Supported | — |
| Flash Accelerator | ART Accelerator, zero-wait-state execution | — |
| Encapsulamento | 100-pin LQFP, 14 x 14 mm | LQFP-100 (14 x 14 mm) |
| Tipo de montagem | Surface mount | Surface Mount |
| Nominal Supply | 2.5 V or 3.3 V | — |
| LCD Interface | Parallel LCD interface | — |
| Temperatura de operação | [DATA_NEEDED: operating temperature range] | -40 C to +85 C (grade 6) |
| Status RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| CPU Maximum Frequency | — | 180 MHz |
| DMIPS Performance | — | 225 DMIPS (1.25 DMIPS/MHz, Dhrystone 2.1) |
| SRAM | — | 192 KB (including 4 KB backup SRAM) |
| Operating Voltage | — | 1.8 V to 3.6 V |
| ART Accelerator | — | Yes (0-wait-state Flash execution) |
| MPU | — | Yes (memory protection unit) |
| LCD-TFT Controller | — | Yes, up to XGA resolution |
| DMA2D (Chrom-ART) | — | Yes |
| USB OTG | — | HS + FS (with on-chip PHY) |
| Ethernet MAC | — | 10/100 with IEEE 1588v2 |
| CAN Controllers | — | 2 x CAN 2.0B active |
| ADC | — | 3 x 12-bit, up to 2.4 MSPS |
| DAC | — | 2 x 12-bit |
| Timers | — | 17 (including 12 x 16-bit, 2 x 32-bit) |
| GPIOs | — | Up to 82 fast GPIOs |
| Crypto/Hash Accelerator | — | AES-128/192/256, SHA-1, MD5, 3DES |
| SDMMC | — | 1 x SDMMC host |
| Communication Peripherals | — | UART, SPI, I2C, SAI, SPDIF-Rx |
| Nível MSL | — | 3 (168 hours) |