STM32L053R8T3 vs STM32L053R8T6 Vergleich

Detaillierter Direktvergleich von STM32L053R8T3 von STMicroelectronics und STM32L053R8T6 von STMicroelectronics. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.

STMicroelectronics
STM32L053R8T3 STM32L053R8T3 - 32MHz Cortex-M0+ MCU | STMicroelectronics

STM32L053R8T3 - 32MHz Cortex-M0+ MCU | STMicroelectronics

STM32L053R8T3 ✓ Aktiv
STMicroelectronics
STM32L053R8T6 STM32L053R8T6 - 32MHz Ultra-Low-Power Cortex-M0+ MCU | ST

STM32L053R8T6 - 32MHz Ultra-Low-Power Cortex-M0+ MCU | ST

STM32L053R8T6 ✓ Aktiv

Spezifikationsvergleich

Parameter STM32L053R8T3 STM32L053R8T6
Marke STMicroelectronics STMicroelectronics
Kategorie Microcontrollers Microcontrollers
Lebenszyklusstatus Aktiv Aktiv
Product Type Ultra-low-power 32-bit microcontroller —
Processor Core ARM Cortex-M0+ —
Maximum CPU Frequency 32 MHz 32 MHz
Flash Memory 64 KB —
Flash Organization 64K x 8 bits —
SRAM 8 KB —
Operating Supply Voltage with BOR 1.8 V to 3.6 V —
Operating Supply Voltage without BOR 1.65 V to 3.6 V —
Power-Down Supply Voltage Down to 1.65 V —
Betriebstemperaturbereich -40 °C to +125 °C -40 C to +125 C
USB Interface USB 2.0 crystal-less —
Architecture 32-bit RISC —
Gehäuse 64-pin LQFP, 10 mm x 10 mm —
Montageart Surface mount Surface Mount
Supply Configuration 2.5 V / 3.3 V —
Packaging Form Tray —
Power-Saving Modes Comprehensive low-power mode set —
Brown-Out Detector Optional, depending on supply configuration —
RoHS-Status [DATA_NEEDED: RoHS status] —
REACH Status [DATA_NEEDED: REACH status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Core Processor — ARM Cortex-M0+
Core Architecture — 32-bit
Flash Memory Size — 64 KB (64K x 8)
SRAM Size — 8 KB
Supply Voltage Range — 1.8 V to 3.6 V (BOR enabled; down to 1.65 V in power-down without BOR)
Gehäuse / Bauform — 64-LQFP (10x10 mm)
Anzahl der Pins — 64
USB Controller — USB 2.0 full-speed crystal-less device
ADC — 12-bit with hardware oversampling up to 16-bit resolution
DAC — 12-bit
Comparators — 2 ultra-low-power comparators
LCD Driver — Up to 8x28 segments
Communication Interfaces — I2C, SPI, USART
Run Mode Current — 84 uA/MHz (typical)
Standby Current with RTC — 0.29 uA (typical)
Number of GPIOs — [DATA_NEEDED: Number of GPIOs]
RoHS — Compliant

Datenblätter & Ressourcen

Alle Produkte durchsuchen BOM erstellen Angebot anfordern