STM32L053R8T3 vs STM32L053R8T6 So sánh

So sánh chi tiết song song của STM32L053R8T3 bằng STMicroelectronics và STM32L053R8T6 bằng STMicroelectronics. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

STMicroelectronics
STM32L053R8T3 STM32L053R8T3 - 32MHz Cortex-M0+ MCU | STMicroelectronics

STM32L053R8T3 - 32MHz Cortex-M0+ MCU | STMicroelectronics

STM32L053R8T3 ✓ Hoạt động
STMicroelectronics
STM32L053R8T6 STM32L053R8T6 - 32MHz Ultra-Low-Power Cortex-M0+ MCU | ST

STM32L053R8T6 - 32MHz Ultra-Low-Power Cortex-M0+ MCU | ST

STM32L053R8T6 ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số STM32L053R8T3 STM32L053R8T6
Thương hiệu STMicroelectronics STMicroelectronics
Danh mục Microcontrollers Microcontrollers
Trạng thái vòng đời Hoạt động Hoạt động
Product Type Ultra-low-power 32-bit microcontroller —
Processor Core ARM Cortex-M0+ —
Maximum CPU Frequency 32 MHz 32 MHz
Flash Memory 64 KB —
Flash Organization 64K x 8 bits —
SRAM 8 KB —
Operating Supply Voltage with BOR 1.8 V to 3.6 V —
Operating Supply Voltage without BOR 1.65 V to 3.6 V —
Power-Down Supply Voltage Down to 1.65 V —
Khoảng nhiệt độ hoạt động -40 °C to +125 °C -40 C to +125 C
USB Interface USB 2.0 crystal-less —
Architecture 32-bit RISC —
Hộp 64-pin LQFP, 10 mm x 10 mm —
Kiểu lắp đặt Surface mount Surface Mount
Supply Configuration 2.5 V / 3.3 V —
Packaging Form Tray —
Power-Saving Modes Comprehensive low-power mode set —
Brown-Out Detector Optional, depending on supply configuration —
Trạng thái RoHS [DATA_NEEDED: RoHS status] —
REACH Status [DATA_NEEDED: REACH status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Core Processor — ARM Cortex-M0+
Core Architecture — 32-bit
Flash Memory Size — 64 KB (64K x 8)
SRAM Size — 8 KB
Supply Voltage Range — 1.8 V to 3.6 V (BOR enabled; down to 1.65 V in power-down without BOR)
Hộp / Vỏ — 64-LQFP (10x10 mm)
Số lượng chân — 64
USB Controller — USB 2.0 full-speed crystal-less device
ADC — 12-bit with hardware oversampling up to 16-bit resolution
DAC — 12-bit
Comparators — 2 ultra-low-power comparators
LCD Driver — Up to 8x28 segments
Communication Interfaces — I2C, SPI, USART
Run Mode Current — 84 uA/MHz (typical)
Standby Current with RTC — 0.29 uA (typical)
Number of GPIOs — [DATA_NEEDED: Number of GPIOs]
RoHS — Compliant

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá