STM32L053R8T3 vs STM32L053R8T6 Karşılaştırma

Ayrıntılı yan yana karşılaştırma STM32L053R8T3 tarafından STMicroelectronics ve STM32L053R8T6 tarafından STMicroelectronicsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.

STMicroelectronics
STM32L053R8T3 STM32L053R8T3 - 32MHz Cortex-M0+ MCU | STMicroelectronics

STM32L053R8T3 - 32MHz Cortex-M0+ MCU | STMicroelectronics

STM32L053R8T3 ✓ Aktif
STMicroelectronics
STM32L053R8T6 STM32L053R8T6 - 32MHz Ultra-Low-Power Cortex-M0+ MCU | ST

STM32L053R8T6 - 32MHz Ultra-Low-Power Cortex-M0+ MCU | ST

STM32L053R8T6 ✓ Aktif

Özellik Karşılaştırması

Parametre STM32L053R8T3 STM32L053R8T6
Marka STMicroelectronics STMicroelectronics
Kategori Microcontrollers Microcontrollers
Yaşam Döngüsü Durumu Aktif Aktif
Product Type Ultra-low-power 32-bit microcontroller —
Processor Core ARM Cortex-M0+ —
Maximum CPU Frequency 32 MHz 32 MHz
Flash Memory 64 KB —
Flash Organization 64K x 8 bits —
SRAM 8 KB —
Operating Supply Voltage with BOR 1.8 V to 3.6 V —
Operating Supply Voltage without BOR 1.65 V to 3.6 V —
Power-Down Supply Voltage Down to 1.65 V —
İşletim Sıcaklığı Aralığı -40 °C to +125 °C -40 C to +125 C
USB Interface USB 2.0 crystal-less —
Architecture 32-bit RISC —
Paket 64-pin LQFP, 10 mm x 10 mm —
Montaj Türü Surface mount Surface Mount
Supply Configuration 2.5 V / 3.3 V —
Packaging Form Tray —
Power-Saving Modes Comprehensive low-power mode set —
Brown-Out Detector Optional, depending on supply configuration —
RoHS Durumu [DATA_NEEDED: RoHS status] —
REACH Status [DATA_NEEDED: REACH status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Core Processor — ARM Cortex-M0+
Core Architecture — 32-bit
Flash Memory Size — 64 KB (64K x 8)
SRAM Size — 8 KB
Supply Voltage Range — 1.8 V to 3.6 V (BOR enabled; down to 1.65 V in power-down without BOR)
Paket / Kas — 64-LQFP (10x10 mm)
Pin Sayısı — 64
USB Controller — USB 2.0 full-speed crystal-less device
ADC — 12-bit with hardware oversampling up to 16-bit resolution
DAC — 12-bit
Comparators — 2 ultra-low-power comparators
LCD Driver — Up to 8x28 segments
Communication Interfaces — I2C, SPI, USART
Run Mode Current — 84 uA/MHz (typical)
Standby Current with RTC — 0.29 uA (typical)
Number of GPIOs — [DATA_NEEDED: Number of GPIOs]
RoHS — Compliant

Dökümanlar & Kaynaklar

Tüm Ürünleri Gözden Geçir BOM Oluştur Teklif İsteyin