STUSB4500QTR vs TPS2547RTER Vergleich
Detaillierter Direktvergleich von STUSB4500QTR von STMicroelectronics und TPS2547RTER von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
STMicroelectronics
STUSB4500QTR - Standalone USB PD Sink Controller, 100W, 24-QFN | STMicroelectronics
STUSB4500QTR ✓ AktivTexas Instruments
TPS2547RTER - USB Charging Port Controller, 3A Power Switch | TI
TPS2547RTER ✓ AktivSpezifikationsvergleich
| Parameter | STUSB4500QTR | TPS2547RTER |
|---|---|---|
| Marke | STMicroelectronics | Texas Instruments |
| Kategorie | Interface ICs | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,74 | $0,72 |
| Product Type | Standalone USB Type-C PD Sink Controller | — |
| USB Standard | USB Type-C R2.1, USB Power Delivery R3.0 | — |
| USB Speed | USB 1.2 / USB 2.0 (no USB 3.x data) | — |
| Maximum PD Power | 100 W (20 V / 5 A) | — |
| Supported PDO Voltages | 5 V / 9 V / 12 V / 15 V / 20 V | — |
| Role | Sink (UFP) only | — |
| Host Interface | I2C (Fast-mode 400 kHz) | — |
| CC Pin VBUS Short Protection | Up to 22 V on CC1, CC2, VCONN- | — |
| Integrated NVM | Yes (PDO profile configuration) | — |
| Dead Battery Support | Yes | — |
| Auto-Run Mode | Yes (MCU-less negotiation) | — |
| VCONN Source | No (sink only, no VCONN supply) | — |
| GPIO Pins | 2 (configurable) | — |
| Gehäuse | 24-QFN (4x4 mm) with exposed pad | 16-WQFN (3.00 mm x 3.00 mm), exposed pad |
| Betriebstemperaturbereich | -40 C to +105 C | — |
| Supply Voltage (VBUS to VCC internal LDO) | Up to 22 V tolerance | — |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | 3 (168 hours) | — |
| RoHS-Status | Compliant | Compliant |
| USB-IF Certification | Yes (TID 1074413) | — |
| Funktion | — | USB Charging Port Controller and Power Switch |
| Switch Type | — | 1:1 N-Channel |
| Anzahl der Ausgänge | — | 1 |
| Ausgangsstrom (max.) | — | 3 A |
| Output Current Range | — | 0.2 A to 3 A |
| Input Voltage (Max) | — | 5.5 V |
| On Resistance (Typ) | — | [DATA_NEEDED: R_DS(on) at 5V] |
| Quiescent Current (Disabled) | — | 2 uA |
| Quiescent Current (Enabled) | — | 270 uA |
| ESD Rating (DM/DP) | — | 8 kV HBM |
| USB Data Switch | — | USB 2.0 High-Speed (D+/D-) |
| Charging Standards | — | BC1.2 CDP/DCP, YD/T 1591-2009, Auto non-BC1.2 modes |
| Betriebstemperatur | — | -40 C to +125 C |
| Protection Features | — | Overcurrent, Over-temperature, Under-voltage lockout, Output discharge |
| UL Recognition | — | E169910 (CB Certified - Pending) |