STUSB4500QTR vs TPS2547RTER 比較

詳細な並列比較: STUSB4500QTR メーカー: STMicroelectronics および TPS2547RTER メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

Texas Instruments
TPS2547RTER TPS2547RTER - USB Charging Port Controller, 3A Power Switch | TI

TPS2547RTER - USB Charging Port Controller, 3A Power Switch | TI

TPS2547RTER ✓ 生産中

仕様比較

パラメータ STUSB4500QTR TPS2547RTER
ブランド STMicroelectronics Texas Instruments
カテゴリ Interface ICs Power MOSFET Drivers
ライフサイクル状態 有効 有効
在庫状況 In Stock In Stock
単価(USD) $0.74 $0.72
Product Type Standalone USB Type-C PD Sink Controller —
USB Standard USB Type-C R2.1, USB Power Delivery R3.0 —
USB Speed USB 1.2 / USB 2.0 (no USB 3.x data) —
Maximum PD Power 100 W (20 V / 5 A) —
Supported PDO Voltages 5 V / 9 V / 12 V / 15 V / 20 V —
Role Sink (UFP) only —
Host Interface I2C (Fast-mode 400 kHz) —
CC Pin VBUS Short Protection Up to 22 V on CC1, CC2, VCONN- —
Integrated NVM Yes (PDO profile configuration) —
Dead Battery Support Yes —
Auto-Run Mode Yes (MCU-less negotiation) —
VCONN Source No (sink only, no VCONN supply) —
GPIO Pins 2 (configurable) —
パッケージ 24-QFN (4x4 mm) with exposed pad 16-WQFN (3.00 mm x 3.00 mm), exposed pad
動作温度範囲 -40 C to +105 C —
Supply Voltage (VBUS to VCC internal LDO) Up to 22 V tolerance —
実装タイプ Surface Mount Surface Mount
MSLレベル 3 (168 hours) —
RoHS ステータス Compliant Compliant
USB-IF Certification Yes (TID 1074413) —
機能 — USB Charging Port Controller and Power Switch
Switch Type — 1:1 N-Channel
出力数 — 1
出力電流(最大) — 3 A
Output Current Range — 0.2 A to 3 A
Input Voltage (Max) — 5.5 V
On Resistance (Typ) — [DATA_NEEDED: R_DS(on) at 5V]
Quiescent Current (Disabled) — 2 uA
Quiescent Current (Enabled) — 270 uA
ESD Rating (DM/DP) — 8 kV HBM
USB Data Switch — USB 2.0 High-Speed (D+/D-)
Charging Standards — BC1.2 CDP/DCP, YD/T 1591-2009, Auto non-BC1.2 modes
動作温度 — -40 C to +125 C
Protection Features — Overcurrent, Over-temperature, Under-voltage lockout, Output discharge
UL Recognition — E169910 (CB Certified - Pending)

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼