STUSB4500QTR vs TPS2547RTER Comparaison
Comparaison détaillée côte à côte de STUSB4500QTR par STMicroelectronics et TPS2547RTER par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
STMicroelectronics
STUSB4500QTR - Standalone USB PD Sink Controller, 100W, 24-QFN | STMicroelectronics
STUSB4500QTR ✓ ActifTexas Instruments
TPS2547RTER - USB Charging Port Controller, 3A Power Switch | TI
TPS2547RTER ✓ ActifComparaison des spécifications
| Paramètre | STUSB4500QTR | TPS2547RTER |
|---|---|---|
| Marque | STMicroelectronics | Texas Instruments |
| Catégorie | Interface ICs | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,74 | $0,72 |
| Product Type | Standalone USB Type-C PD Sink Controller | — |
| USB Standard | USB Type-C R2.1, USB Power Delivery R3.0 | — |
| USB Speed | USB 1.2 / USB 2.0 (no USB 3.x data) | — |
| Maximum PD Power | 100 W (20 V / 5 A) | — |
| Supported PDO Voltages | 5 V / 9 V / 12 V / 15 V / 20 V | — |
| Role | Sink (UFP) only | — |
| Host Interface | I2C (Fast-mode 400 kHz) | — |
| CC Pin VBUS Short Protection | Up to 22 V on CC1, CC2, VCONN- | — |
| Integrated NVM | Yes (PDO profile configuration) | — |
| Dead Battery Support | Yes | — |
| Auto-Run Mode | Yes (MCU-less negotiation) | — |
| VCONN Source | No (sink only, no VCONN supply) | — |
| GPIO Pins | 2 (configurable) | — |
| Boîtier | 24-QFN (4x4 mm) with exposed pad | 16-WQFN (3.00 mm x 3.00 mm), exposed pad |
| Plage de température de fonctionnement | -40 C to +105 C | — |
| Supply Voltage (VBUS to VCC internal LDO) | Up to 22 V tolerance | — |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | 3 (168 hours) | — |
| Statut RoHS | Compliant | Compliant |
| USB-IF Certification | Yes (TID 1074413) | — |
| Fonction | — | USB Charging Port Controller and Power Switch |
| Switch Type | — | 1:1 N-Channel |
| Nombre de sorties | — | 1 |
| Courant de sortie (max.) | — | 3 A |
| Output Current Range | — | 0.2 A to 3 A |
| Input Voltage (Max) | — | 5.5 V |
| On Resistance (Typ) | — | [DATA_NEEDED: R_DS(on) at 5V] |
| Quiescent Current (Disabled) | — | 2 uA |
| Quiescent Current (Enabled) | — | 270 uA |
| ESD Rating (DM/DP) | — | 8 kV HBM |
| USB Data Switch | — | USB 2.0 High-Speed (D+/D-) |
| Charging Standards | — | BC1.2 CDP/DCP, YD/T 1591-2009, Auto non-BC1.2 modes |
| Température de fonctionnement | — | -40 C to +125 C |
| Protection Features | — | Overcurrent, Over-temperature, Under-voltage lockout, Output discharge |
| UL Recognition | — | E169910 (CB Certified - Pending) |