TLD1310ELXUMA1 vs TLD1211SJFUMA1 Vergleich
Detaillierter Direktvergleich von TLD1310ELXUMA1 von Infineon und TLD1211SJFUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | TLD1310ELXUMA1 | TLD1211SJFUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | LED Drivers | LED Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,94 | $0,33 |
| Topologie | Linear High-Side Current Source | Linear Constant-Current |
| Number of Channels | 3 | — |
| Output Current per Channel | 120 mA (max) | — |
| Total Output Current | 360 mA (sum of all channels) | — |
| Supply Voltage Range | 5.5 V to 40 V | — |
| Supported Bus Voltages | 9 V / 12 V / 15 V / 18 V / 24 V (automotive) | — |
| Dimming Method | Analog and Digital (PWM via EN/PWM pin) | — |
| Gehäuse | PG-SSOP-14-5 (14-pin SSOP with exposed pad) | PG-DSO-8-16 (8-pin, exposed pad) |
| Betriebstemperaturbereich | -40 °C to +150 °C (junction) | -40 C to +150 C (junction) |
| AEC-Q100 Qualification | Yes (Automotive Grade) | — |
| Current Accuracy | [DATA_NEEDED: typical current accuracy %] | — |
| Dropout-Spannung | [DATA_NEEDED: typical dropout voltage] | — |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | 3 | — |
| RoHS-Status | Compliant | Compliant |
| Diagnostic Features | Open-load, Short-to-ground, Over-temperature | — |
| Product Family | LITIX Basic | — |
| Product Type | — | Linear LED Driver IC |
| Anzahl der Ausgänge | — | 1 |
| Maximaler Ausgangsstrom | — | 85 mA |
| Supply Voltage Range (Vs) | — | 5.5 V to 28 V |
| Load-Dump Tolerance | — | 40 V |
| Dimming Interface | — | PWM via EN pin (CMOS/TTL) |
| EN High-Level Voltage (V_EN,ON) | — | 1 V to 5.5 V |
| EN Low-Level Voltage (V_EN,OFF) | — | -0.3 V to 0.3 V |
| EN Input Current (I_EN) | — | 60 to 130 uA (V_EN = 5 V) |
| Sense Voltage (Vsense) | — | Programmed by external resistor |
| Drop Voltage (Vs - Vout) | — | 1.3 V typical (Iout < 15 mA, Vsense = 0 mV, Vs = 8 V) |
| Automotive Qualification | — | AEC-Q100 targeted (Automotive Grade) |