TLD1310ELXUMA1 vs TLD1211SJFUMA1 Comparaison
Comparaison détaillée côte à côte de TLD1310ELXUMA1 par Infineon et TLD1211SJFUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | TLD1310ELXUMA1 | TLD1211SJFUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | LED Drivers | LED Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,94 | $0,33 |
| Topologie | Linear High-Side Current Source | Linear Constant-Current |
| Number of Channels | 3 | — |
| Output Current per Channel | 120 mA (max) | — |
| Total Output Current | 360 mA (sum of all channels) | — |
| Supply Voltage Range | 5.5 V to 40 V | — |
| Supported Bus Voltages | 9 V / 12 V / 15 V / 18 V / 24 V (automotive) | — |
| Dimming Method | Analog and Digital (PWM via EN/PWM pin) | — |
| Boîtier | PG-SSOP-14-5 (14-pin SSOP with exposed pad) | PG-DSO-8-16 (8-pin, exposed pad) |
| Plage de température de fonctionnement | -40 °C to +150 °C (junction) | -40 C to +150 C (junction) |
| AEC-Q100 Qualification | Yes (Automotive Grade) | — |
| Current Accuracy | [DATA_NEEDED: typical current accuracy %] | — |
| Tension de déchet | [DATA_NEEDED: typical dropout voltage] | — |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | 3 | — |
| Statut RoHS | Compliant | Compliant |
| Diagnostic Features | Open-load, Short-to-ground, Over-temperature | — |
| Product Family | LITIX Basic | — |
| Product Type | — | Linear LED Driver IC |
| Nombre de sorties | — | 1 |
| Courant de sortie maximal | — | 85 mA |
| Supply Voltage Range (Vs) | — | 5.5 V to 28 V |
| Load-Dump Tolerance | — | 40 V |
| Dimming Interface | — | PWM via EN pin (CMOS/TTL) |
| EN High-Level Voltage (V_EN,ON) | — | 1 V to 5.5 V |
| EN Low-Level Voltage (V_EN,OFF) | — | -0.3 V to 0.3 V |
| EN Input Current (I_EN) | — | 60 to 130 uA (V_EN = 5 V) |
| Sense Voltage (Vsense) | — | Programmed by external resistor |
| Drop Voltage (Vs - Vout) | — | 1.3 V typical (Iout < 15 mA, Vsense = 0 mV, Vs = 8 V) |
| Automotive Qualification | — | AEC-Q100 targeted (Automotive Grade) |