TLD1310ELXUMA1 vs TLD1211SJFUMA1 Comparación
Comparación detallada lado a lado de TLD1310ELXUMA1 por Infineon y TLD1211SJFUMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | TLD1310ELXUMA1 | TLD1211SJFUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | LED Drivers | LED Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $0,94 | $0,33 |
| Topología | Linear High-Side Current Source | Linear Constant-Current |
| Number of Channels | 3 | — |
| Output Current per Channel | 120 mA (max) | — |
| Total Output Current | 360 mA (sum of all channels) | — |
| Supply Voltage Range | 5.5 V to 40 V | — |
| Supported Bus Voltages | 9 V / 12 V / 15 V / 18 V / 24 V (automotive) | — |
| Dimming Method | Analog and Digital (PWM via EN/PWM pin) | — |
| Encapsulado | PG-SSOP-14-5 (14-pin SSOP with exposed pad) | PG-DSO-8-16 (8-pin, exposed pad) |
| Rango de temperatura de funcionamiento | -40 °C to +150 °C (junction) | -40 C to +150 C (junction) |
| AEC-Q100 Qualification | Yes (Automotive Grade) | — |
| Current Accuracy | [DATA_NEEDED: typical current accuracy %] | — |
| Tensión de dropout | [DATA_NEEDED: typical dropout voltage] | — |
| Tipo de montaje | Surface Mount | Surface Mount |
| Nivel MSL | 3 | — |
| Estado RoHS | Compliant | Compliant |
| Diagnostic Features | Open-load, Short-to-ground, Over-temperature | — |
| Product Family | LITIX Basic | — |
| Product Type | — | Linear LED Driver IC |
| Número de salidas | — | 1 |
| Corriente de salida máxima | — | 85 mA |
| Supply Voltage Range (Vs) | — | 5.5 V to 28 V |
| Load-Dump Tolerance | — | 40 V |
| Dimming Interface | — | PWM via EN pin (CMOS/TTL) |
| EN High-Level Voltage (V_EN,ON) | — | 1 V to 5.5 V |
| EN Low-Level Voltage (V_EN,OFF) | — | -0.3 V to 0.3 V |
| EN Input Current (I_EN) | — | 60 to 130 uA (V_EN = 5 V) |
| Sense Voltage (Vsense) | — | Programmed by external resistor |
| Drop Voltage (Vs - Vout) | — | 1.3 V typical (Iout < 15 mA, Vsense = 0 mV, Vs = 8 V) |
| Automotive Qualification | — | AEC-Q100 targeted (Automotive Grade) |