TLE9104SHXUMA1 vs IFX9201SGAUMA1 Vergleich
Detaillierter Direktvergleich von TLE9104SHXUMA1 von Infineon und IFX9201SGAUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | TLE9104SHXUMA1 | IFX9201SGAUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Motor Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $3,72 | $2,05 |
| Product Type | Multi-Channel Low-Side Power Switch | — |
| Number of Channels | 4 | — |
| Load Current per Channel | 3 A (continuous) | — |
| Topologie | 1:1 N-Channel Low-Side Switch | Full H-Bridge (2 half-bridges) |
| Supply Voltage Range (VDD) | 4.5 V to 28 V | — |
| Logic Reference (VIO) | 3.3 V / 5 V compatible | — |
| Communication Interface | 16-bit SPI | — |
| R_DS(on) per Channel | [DATA_NEEDED: typical R_DS(on) in mohm] | — |
| Betriebstemperatur | -40 °C to +150 °C (junction) | — |
| Gehäuse | PG-DSO-20-88 (20-pin BFSOP with exposed pad) | PG-DSO-12-17 (12-BSOP with Exposed Pad) |
| Montageart | Surface Mount | Surface Mount |
| Protection Features | Over-current, Over-temperature, Over-load, short-to-ground, open-load detection | UVLO, OCP, OTP, short-circuit, open-load detection |
| Diagnostic Output | SPI status registers (per-channel fault flags) | — |
| Automotive Qualification | AEC-Q100 qualified (automotive grade) | — |
| MSL-Level | MSL3 (per JEDEC J-STD-020) | [DATA_NEEDED: MSL level] |
| RoHS / Lead-Free | RoHS compliant, lead-free | — |
| Reset Pin (RESN) | Active-low with configurable reset duration | — |
| Supply Voltage Range | — | 5 V to 36 V |
| Continuous Output Current | — | 6 A |
| Peak Output Current | — | [DATA_NEEDED: peak current] |
| RDS(on) per Switch (typ) | — | [DATA_NEEDED: RDS(on)] |
| Control Interface | — | PWM, DIR, SPI diagnostics |
| PWM Frequency (max) | — | 25 kHz |
| SPI Clock Frequency (max) | — | 4 MHz |
| Operating Temperature Range (TJ) | — | -40 C to +125 C |
| RoHS-Status | — | Compliant |
| Target Applications | — | DC motors, inductive loads, power tools, home appliances, building automation |