TLE9104SHXUMA1 vs IFX9201SGAUMA1 Comparaison
Comparaison détaillée côte à côte de TLE9104SHXUMA1 par Infineon et IFX9201SGAUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | TLE9104SHXUMA1 | IFX9201SGAUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Motor Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $3,72 | $2,05 |
| Product Type | Multi-Channel Low-Side Power Switch | — |
| Number of Channels | 4 | — |
| Load Current per Channel | 3 A (continuous) | — |
| Topologie | 1:1 N-Channel Low-Side Switch | Full H-Bridge (2 half-bridges) |
| Supply Voltage Range (VDD) | 4.5 V to 28 V | — |
| Logic Reference (VIO) | 3.3 V / 5 V compatible | — |
| Communication Interface | 16-bit SPI | — |
| R_DS(on) per Channel | [DATA_NEEDED: typical R_DS(on) in mohm] | — |
| Température de fonctionnement | -40 °C to +150 °C (junction) | — |
| Boîtier | PG-DSO-20-88 (20-pin BFSOP with exposed pad) | PG-DSO-12-17 (12-BSOP with Exposed Pad) |
| Type de montage | Surface Mount | Surface Mount |
| Protection Features | Over-current, Over-temperature, Over-load, short-to-ground, open-load detection | UVLO, OCP, OTP, short-circuit, open-load detection |
| Diagnostic Output | SPI status registers (per-channel fault flags) | — |
| Automotive Qualification | AEC-Q100 qualified (automotive grade) | — |
| Niveau MSL | MSL3 (per JEDEC J-STD-020) | [DATA_NEEDED: MSL level] |
| RoHS / Lead-Free | RoHS compliant, lead-free | — |
| Reset Pin (RESN) | Active-low with configurable reset duration | — |
| Supply Voltage Range | — | 5 V to 36 V |
| Continuous Output Current | — | 6 A |
| Peak Output Current | — | [DATA_NEEDED: peak current] |
| RDS(on) per Switch (typ) | — | [DATA_NEEDED: RDS(on)] |
| Control Interface | — | PWM, DIR, SPI diagnostics |
| PWM Frequency (max) | — | 25 kHz |
| SPI Clock Frequency (max) | — | 4 MHz |
| Operating Temperature Range (TJ) | — | -40 C to +125 C |
| Statut RoHS | — | Compliant |
| Target Applications | — | DC motors, inductive loads, power tools, home appliances, building automation |