TLE9104SHXUMA1 vs IFX9201SGAUMA1 Comparación
Comparación detallada lado a lado de TLE9104SHXUMA1 por Infineon y IFX9201SGAUMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | TLE9104SHXUMA1 | IFX9201SGAUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Motor Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $3,72 | $2,05 |
| Product Type | Multi-Channel Low-Side Power Switch | — |
| Number of Channels | 4 | — |
| Load Current per Channel | 3 A (continuous) | — |
| Topología | 1:1 N-Channel Low-Side Switch | Full H-Bridge (2 half-bridges) |
| Supply Voltage Range (VDD) | 4.5 V to 28 V | — |
| Logic Reference (VIO) | 3.3 V / 5 V compatible | — |
| Communication Interface | 16-bit SPI | — |
| R_DS(on) per Channel | [DATA_NEEDED: typical R_DS(on) in mohm] | — |
| Temperatura de funcionamiento | -40 °C to +150 °C (junction) | — |
| Encapsulado | PG-DSO-20-88 (20-pin BFSOP with exposed pad) | PG-DSO-12-17 (12-BSOP with Exposed Pad) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Protection Features | Over-current, Over-temperature, Over-load, short-to-ground, open-load detection | UVLO, OCP, OTP, short-circuit, open-load detection |
| Diagnostic Output | SPI status registers (per-channel fault flags) | — |
| Automotive Qualification | AEC-Q100 qualified (automotive grade) | — |
| Nivel MSL | MSL3 (per JEDEC J-STD-020) | [DATA_NEEDED: MSL level] |
| RoHS / Lead-Free | RoHS compliant, lead-free | — |
| Reset Pin (RESN) | Active-low with configurable reset duration | — |
| Supply Voltage Range | — | 5 V to 36 V |
| Continuous Output Current | — | 6 A |
| Peak Output Current | — | [DATA_NEEDED: peak current] |
| RDS(on) per Switch (typ) | — | [DATA_NEEDED: RDS(on)] |
| Control Interface | — | PWM, DIR, SPI diagnostics |
| PWM Frequency (max) | — | 25 kHz |
| SPI Clock Frequency (max) | — | 4 MHz |
| Operating Temperature Range (TJ) | — | -40 C to +125 C |
| Estado RoHS | — | Compliant |
| Target Applications | — | DC motors, inductive loads, power tools, home appliances, building automation |