TPS2547RTER vs STUSB4500QTR Vergleich
Detaillierter Direktvergleich von TPS2547RTER von Texas Instruments und STUSB4500QTR von STMicroelectronics. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
TPS2547RTER - USB Charging Port Controller, 3A Power Switch | TI
TPS2547RTER ✓ AktivSTMicroelectronics
STUSB4500QTR - Standalone USB PD Sink Controller, 100W, 24-QFN | STMicroelectronics
STUSB4500QTR ✓ AktivSpezifikationsvergleich
| Parameter | TPS2547RTER | STUSB4500QTR |
|---|---|---|
| Marke | Texas Instruments | STMicroelectronics |
| Kategorie | Power MOSFET Drivers | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,72 | $0,74 |
| Funktion | USB Charging Port Controller and Power Switch | — |
| Switch Type | 1:1 N-Channel | — |
| Anzahl der Ausgänge | 1 | — |
| Ausgangsstrom (max.) | 3 A | — |
| Output Current Range | 0.2 A to 3 A | — |
| Input Voltage (Max) | 5.5 V | — |
| On Resistance (Typ) | [DATA_NEEDED: R_DS(on) at 5V] | — |
| Quiescent Current (Disabled) | 2 uA | — |
| Quiescent Current (Enabled) | 270 uA | — |
| ESD Rating (DM/DP) | 8 kV HBM | — |
| USB Data Switch | USB 2.0 High-Speed (D+/D-) | — |
| Charging Standards | BC1.2 CDP/DCP, YD/T 1591-2009, Auto non-BC1.2 modes | — |
| Betriebstemperatur | -40 C to +125 C | — |
| Gehäuse | 16-WQFN (3.00 mm x 3.00 mm), exposed pad | 24-QFN (4x4 mm) with exposed pad |
| Montageart | Surface Mount | Surface Mount |
| Protection Features | Overcurrent, Over-temperature, Under-voltage lockout, Output discharge | — |
| UL Recognition | E169910 (CB Certified - Pending) | — |
| RoHS-Status | Compliant | Compliant |
| Product Type | — | Standalone USB Type-C PD Sink Controller |
| USB Standard | — | USB Type-C R2.1, USB Power Delivery R3.0 |
| USB Speed | — | USB 1.2 / USB 2.0 (no USB 3.x data) |
| Maximum PD Power | — | 100 W (20 V / 5 A) |
| Supported PDO Voltages | — | 5 V / 9 V / 12 V / 15 V / 20 V |
| Role | — | Sink (UFP) only |
| Host Interface | — | I2C (Fast-mode 400 kHz) |
| CC Pin VBUS Short Protection | — | Up to 22 V on CC1, CC2, VCONN- |
| Integrated NVM | — | Yes (PDO profile configuration) |
| Dead Battery Support | — | Yes |
| Auto-Run Mode | — | Yes (MCU-less negotiation) |
| VCONN Source | — | No (sink only, no VCONN supply) |
| GPIO Pins | — | 2 (configurable) |
| Betriebstemperaturbereich | — | -40 C to +105 C |
| Supply Voltage (VBUS to VCC internal LDO) | — | Up to 22 V tolerance |
| MSL-Level | — | 3 (168 hours) |
| USB-IF Certification | — | Yes (TID 1074413) |