TPS2547RTER vs STUSB4500QTR 比較

詳細な並列比較: TPS2547RTER メーカー: Texas Instruments および STUSB4500QTR メーカー: STMicroelectronics。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

Texas Instruments
TPS2547RTER TPS2547RTER - USB Charging Port Controller, 3A Power Switch | TI

TPS2547RTER - USB Charging Port Controller, 3A Power Switch | TI

TPS2547RTER ✓ 生産中

仕様比較

パラメータ TPS2547RTER STUSB4500QTR
ブランド Texas Instruments STMicroelectronics
カテゴリ Power MOSFET Drivers Interface ICs
ライフサイクル状態 有効 有効
在庫状況 In Stock In Stock
単価(USD) $0.72 $0.74
機能 USB Charging Port Controller and Power Switch —
Switch Type 1:1 N-Channel —
出力数 1 —
出力電流(最大) 3 A —
Output Current Range 0.2 A to 3 A —
Input Voltage (Max) 5.5 V —
On Resistance (Typ) [DATA_NEEDED: R_DS(on) at 5V] —
Quiescent Current (Disabled) 2 uA —
Quiescent Current (Enabled) 270 uA —
ESD Rating (DM/DP) 8 kV HBM —
USB Data Switch USB 2.0 High-Speed (D+/D-) —
Charging Standards BC1.2 CDP/DCP, YD/T 1591-2009, Auto non-BC1.2 modes —
動作温度 -40 C to +125 C —
パッケージ 16-WQFN (3.00 mm x 3.00 mm), exposed pad 24-QFN (4x4 mm) with exposed pad
実装タイプ Surface Mount Surface Mount
Protection Features Overcurrent, Over-temperature, Under-voltage lockout, Output discharge —
UL Recognition E169910 (CB Certified - Pending) —
RoHS ステータス Compliant Compliant
Product Type — Standalone USB Type-C PD Sink Controller
USB Standard — USB Type-C R2.1, USB Power Delivery R3.0
USB Speed — USB 1.2 / USB 2.0 (no USB 3.x data)
Maximum PD Power — 100 W (20 V / 5 A)
Supported PDO Voltages — 5 V / 9 V / 12 V / 15 V / 20 V
Role — Sink (UFP) only
Host Interface — I2C (Fast-mode 400 kHz)
CC Pin VBUS Short Protection — Up to 22 V on CC1, CC2, VCONN-
Integrated NVM — Yes (PDO profile configuration)
Dead Battery Support — Yes
Auto-Run Mode — Yes (MCU-less negotiation)
VCONN Source — No (sink only, no VCONN supply)
GPIO Pins — 2 (configurable)
動作温度範囲 — -40 C to +105 C
Supply Voltage (VBUS to VCC internal LDO) — Up to 22 V tolerance
MSLレベル — 3 (168 hours)
USB-IF Certification — Yes (TID 1074413)

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼