TPS2547RTER vs STUSB4500QTR Comparaison
Comparaison détaillée côte à côte de TPS2547RTER par Texas Instruments et STUSB4500QTR par STMicroelectronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
TPS2547RTER - USB Charging Port Controller, 3A Power Switch | TI
TPS2547RTER ✓ ActifSTMicroelectronics
STUSB4500QTR - Standalone USB PD Sink Controller, 100W, 24-QFN | STMicroelectronics
STUSB4500QTR ✓ ActifComparaison des spécifications
| Paramètre | TPS2547RTER | STUSB4500QTR |
|---|---|---|
| Marque | Texas Instruments | STMicroelectronics |
| Catégorie | Power MOSFET Drivers | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,72 | $0,74 |
| Fonction | USB Charging Port Controller and Power Switch | — |
| Switch Type | 1:1 N-Channel | — |
| Nombre de sorties | 1 | — |
| Courant de sortie (max.) | 3 A | — |
| Output Current Range | 0.2 A to 3 A | — |
| Input Voltage (Max) | 5.5 V | — |
| On Resistance (Typ) | [DATA_NEEDED: R_DS(on) at 5V] | — |
| Quiescent Current (Disabled) | 2 uA | — |
| Quiescent Current (Enabled) | 270 uA | — |
| ESD Rating (DM/DP) | 8 kV HBM | — |
| USB Data Switch | USB 2.0 High-Speed (D+/D-) | — |
| Charging Standards | BC1.2 CDP/DCP, YD/T 1591-2009, Auto non-BC1.2 modes | — |
| Température de fonctionnement | -40 C to +125 C | — |
| Boîtier | 16-WQFN (3.00 mm x 3.00 mm), exposed pad | 24-QFN (4x4 mm) with exposed pad |
| Type de montage | Surface Mount | Surface Mount |
| Protection Features | Overcurrent, Over-temperature, Under-voltage lockout, Output discharge | — |
| UL Recognition | E169910 (CB Certified - Pending) | — |
| Statut RoHS | Compliant | Compliant |
| Product Type | — | Standalone USB Type-C PD Sink Controller |
| USB Standard | — | USB Type-C R2.1, USB Power Delivery R3.0 |
| USB Speed | — | USB 1.2 / USB 2.0 (no USB 3.x data) |
| Maximum PD Power | — | 100 W (20 V / 5 A) |
| Supported PDO Voltages | — | 5 V / 9 V / 12 V / 15 V / 20 V |
| Role | — | Sink (UFP) only |
| Host Interface | — | I2C (Fast-mode 400 kHz) |
| CC Pin VBUS Short Protection | — | Up to 22 V on CC1, CC2, VCONN- |
| Integrated NVM | — | Yes (PDO profile configuration) |
| Dead Battery Support | — | Yes |
| Auto-Run Mode | — | Yes (MCU-less negotiation) |
| VCONN Source | — | No (sink only, no VCONN supply) |
| GPIO Pins | — | 2 (configurable) |
| Plage de température de fonctionnement | — | -40 C to +105 C |
| Supply Voltage (VBUS to VCC internal LDO) | — | Up to 22 V tolerance |
| Niveau MSL | — | 3 (168 hours) |
| USB-IF Certification | — | Yes (TID 1074413) |