Analog Devices

AD7467BRM - 10-Bit 200 kSPS ADC | Analog Devices

Teilenummer: AD7467BRM ✓ Aktiv
1.6 V to 3.6 V Vdss 8-MSOP Package
MOQ: 1 |

AD7467BRM Übersicht

Analog Devices AD7467BRM is a 10-bit, single-channel, successive-approximation analog-to-digital converter with a throughput rate up to 200 kSPS, a 1.6 V to 3.6 V supply range, and an 8-MSOP package. It combines low-power operation with a compact footprint for applications that require moderate resolution and fast sampling.

An ADC is an interface IC that converts an analog voltage into a digital code. A successive-approximation ADC performs conversion by progressively comparing the input with a reference voltage. Within the broader semiconductor hierarchy, the AD7467BRM is an ADC, an interface IC, and a data-acquisition component. It is suited to sensors, industrial controls, instrumentation, and embedded systems that need continuous conversion rather than the very high throughput of a flash converter.

The principal specifications include 10-bit resolution, one analog input channel, operation from 1.6 V to 3.6 V, and throughput up to 200 kSPS. These characteristics place the device between low-resolution sensor interfaces and higher-resolution precision converters. The single 8-MSOP package also reduces board area compared with larger multi-channel converter packages, while the 1.6 V minimum supply supports compact low-voltage systems.

The AD7467 uses a successive-approximation conversion architecture. This architecture is appropriate when moderate conversion speed and low power consumption are more important than very high sampling rates. Analog Devices identifies the AD7466, AD7467, and AD7468 as related 12-bit, 10-bit, and 8-bit converters, respectively, allowing designers to select the resolution that matches the measurement requirement rather than using unnecessary conversion capacity.

Typical uses include battery-powered environmental sensors, temperature and pressure measurement front ends, analog control monitoring, portable instrumentation, and industrial data-acquisition modules. The 200 kSPS throughput allows the converter to sample rapidly varying analog signals, while the 10-bit code provides 1,024 quantization levels for general-purpose measurement and control.

The main design consideration is matching the input range, reference voltage, sampling network, and digital interface to the source signal. The analog input must remain within the converter's permitted operating range, and source impedance can affect acquisition time. PCB layout should keep analog and digital return paths controlled and place input, reference, and supply bypass components close to their associated pins.

This page combines the manufacturer's family-level specifications with package, application, replacement, and design guidance. It also identifies same-footprint resolution alternatives so engineers can assess whether AD7466BRM or AD7468BRM offers a more appropriate conversion resolution without changing the PCB footprint.

Drop-in-Alternativen für AD7467BRM – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit AD7467BRM (gleiche Bauform und Footprint) – abweichend in Package, Resolution, Throughput Rate.

Analog Devices
Package: 8-MSOP, 0.118 inch / 3.00 mm width
Resolution: 12 bit
Throughput Rate: Up to 200 kSPS
Vergleichen mit AD7467BRM →

AD7466BRM

✅ Drop-In ⚠️ Spezifikationen ungeprüft
Analog Devices
📦 8-MSOP
Successive-approximation ADC · 12 bit · 1 channel · Up to 200 kSPS · 1.6 V to 3.6 V · Greater than 100 kHz · Low-noise, wide-bandwidth track-and-hold amplifier · MICROWIRE, QSPI, and SPI compatible

Preis auf Anfrage

Datenblatt ansehen →

AD7468BRM

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 8-MSOP
Resolution decreases from 10 bit to 8 bit, a 20% reduction in bit count; the AD7467 family operates from 1.6 V to 3.6 V at up to 200 kSPS

📋 Referenzalternative (nicht im Katalog)

AD7467BRM Grenzwerte & elektrische Eigenschaften

Auflösung 10 bit
Conversion Architecture Successive approximation (SAR)
Throughput Rate 200 kSPS
Input Channels 1 channel
Supply Voltage Range 1.6 V to 3.6 V
Gehäuse 8-MSOP
Montageart Surface mount
RoHS-Status Compliant

AD7467BRM 8-msop Pinbelegungsleitfaden

Pinbelegung für AD7467BRM (8-msop-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.

Pinbelegungsdiagramm für AD7467BRM im 8-msop-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für AD7467BRM.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

AD7467BRM ist geeignet für 6 Anwendungs: Industrial Sensor Interface, Battery-Powered Environmental Monitoring, Process Control and Feedback Monitoring, Portable Test and Measurement, Motor and Position Feedback, Embedded Data Acquisition.

🏭

Industrial Sensor Interface

The AD7467BRM is appropriate for digitizing outputs from pressure, temperature, level, and position sensors when 10-bit resolution is adequate. Its 200 kSPS throughput provides ample conversion capacity for many slowly changing process signals, while the 1.6 V to 3.6 V supply range can simplify low-voltage instrumentation. A conditioning network should scale the sensor output into the ADC input range and limit source impedance where acquisition timing requires it. Compared with a 12-bit AD7466BRM, the AD7467BRM uses fewer digital code bits, so firmware should explicitly scale and round the converted values to the sensor's useful resolution rather than implying greater physical accuracy than the complete analog chain can deliver.

🧩

Battery-Powered Environmental Monitoring

The AD7467BRM fits compact environmental monitors that measure light, humidity, gas, or ambient-pressure sensor signals from a low-voltage battery-powered platform. Its single analog input and 8-MSOP package minimize board area, and operation begins at 1.6 V, which supports power budgets built around low-voltage rails. The 200 kSPS rate is substantially faster than the update rate of many environmental sensors, allowing the converter to be sampled as needed rather than continuously. System designers should disable or control the converter between measurements according to the manufacturer guidance, verify the input's settling behavior after power-up, and avoid assuming that the nominal 10-bit code count equals the final measurement precision of the sensor and conditioning network.

⚡

Process Control and Feedback Monitoring

The AD7467BRM can digitize a control or feedback signal in a compact industrial control module. Its 200 kSPS throughput is useful for monitoring faster events, while 10-bit resolution provides enough quantization levels for many position, actuator, and analog-loop signals. The ADC operates from the same broad 1.6 V to 3.6 V range used by the AD7466/AD7467/AD7468 family, simplifying rail planning when multiple interface blocks share a supply. For feedback control, input filtering should reject switching and communication noise while preserving the control bandwidth. Software should also include saturation handling and sensor-plausibility checks, since the converter's ten-bit resolution does not prevent overload or out-of-range operating conditions.

🔧

Portable Test and Measurement

The AD7467BRM supports compact handheld or portable measurement instruments that need a space-efficient analog input. The 8-MSOP package preserves PCB area for displays, controls, communication, and power management, while the 200 kSPS rate accommodates many probe, transducer, and calibration signals. The 10-bit result gives 1,024 quantization levels, which can be appropriate for general voltage or status measurement. Designers should place the analog input path away from digital switching nodes, use a stable reference arrangement, and account for acquisition time after selecting a new measurement channel. For instrumentation requiring finer quantization, the 12-bit AD7466BRM offers additional resolution in the same family format, but the complete measurement chain must support that improvement.

🚗

Motor and Position Feedback

The AD7467BRM can convert potentiometer, resolver-interface, or analog position feedback in compact motor-control electronics. Its 200 kSPS throughput is suitable for many servo, valve, and actuator feedback loops, and the 10-bit resolution offers a practical balance between control resolution, conversion speed, and package size. The analog front end should amplify and offset the sensor output into the converter's valid range while providing low noise around the position transition points. Firmware should calibrate endpoint mapping and account for mechanical nonlinearity. If position resolution is the dominant requirement, the 12-bit AD7466BRM provides 20% more bit count and may reduce quantization error, but it must be validated against loop bandwidth, noise, and total system error.

📟

Embedded Data Acquisition

The AD7467BRM is useful in embedded data-acquisition modules that periodically sample one analog channel. The 1.6 V minimum supply voltage supports integration with low-voltage processors and sensors, while the 8-MSOP footprint leaves routing space for a microcontroller, digital interface, and protection components. Its 200 kSPS capability allows multiple samples to be captured for averaging or diagnostics, although the actual system rate is also constrained by source impedance, acquisition behavior, and digital transfer. The analog trace should be short and surrounded by a grounded reference plane where practical, with bypass components positioned close to the supply and reference pins. The 8-bit AD7468BRM may reduce digital payload size, whereas the AD7467BRM retains finer quantization for general-purpose logging.

What is the resolution and throughput of AD7467BRM?
The AD7467BRM provides 10-bit resolution and converts up to 200 kSPS from one analog input channel. According to the Analog Devices AD7467 product page, the AD7467 belongs to a family of 12-bit, 10-bit, and 8-bit successive-approximation ADCs, with the AD7467 occupying the 10-bit position. This combination is appropriate for general-purpose sensing, monitoring, and control systems that require fast sampling without a higher-resolution converter.
What is the supply voltage range of AD7467BRM?
The AD7467BRM operates from a single supply of 1.6 V to 3.6 V. Analog Devices specifies this range for the AD7466, AD7467, and AD7468 family on its official product page. The low minimum operating voltage supports compact battery-powered equipment, although the complete signal chain must remain within the device's specified input and reference limits.
Where can I download the AD7467BRM datasheet PDF?
The official AD7467 datasheet and product resources are available from the Analog Devices product page at https://www.analog.com/en/products/ad7467.html. The page provides the manufacturer data sheet together with ordering, package, and technical information. Use the manufacturer pin-description table and electrical-characteristics tables when assigning PCB tracks or designing the analog input, reference, and bypass networks.
Where can I find the AD7467BRM pinout?
The AD7467BRM pinout is documented on the official Analog Devices AD7467 product page and in the manufacturer data sheet. Because the device uses an 8-MSOP package, the board footprint and pin numbering must follow the MSOP drawing rather than a generic SOIC outline. Confirm the exposed-pad requirements and land pattern against the package drawing before releasing artwork.
What is the best drop-in replacement for AD7467BRM?
AD7466BRM is the closest same-footprint replacement when additional conversion resolution is acceptable, while AD7468BRM is the lower-resolution alternative. Both belong to the same Analog Devices family and use the 8-MSOP format, but they are not performance-identical substitutes. The AD7466 increases resolution from 10 to 12 bit, whereas the AD7468 reduces it from 10 to 8 bit; firmware scaling and accuracy expectations must be reviewed.
Can AD7467BRM replace AD7466BRM in an existing design?
AD7467BRM can replace AD7466BRM only when 10-bit resolution is acceptable and the output-code behavior, acquisition timing, and interface timing remain compatible. The AD7466BRM has 12-bit resolution, providing 1,024 additional code levels compared with the AD7467BRM. The lower-resolution replacement may therefore reduce measurement granularity even though both devices use the same 8-MSOP family package.
When should I choose AD7467BRM over AD7466BRM?
Choose AD7467BRM when 10-bit resolution, 200 kSPS throughput, and low-voltage operation are sufficient. Choose AD7466BRM when the measurement can benefit from 12-bit resolution and the system can accommodate the additional processing and conversion precision. According to the Analog Devices family description, both devices support operation from 1.6 V to 3.6 V, making resolution the primary functional distinction for this comparison.
When should I choose AD7467BRM over AD7468BRM?
Choose AD7467BRM when the application requires more measurement resolution than the AD7468's 8-bit output while retaining the same family supply range and 8-MSOP footprint. The AD7467 provides 10-bit resolution, or 1,024 quantization levels, compared with 256 levels for the 8-bit AD7468. The extra resolution can reduce quantization error in slow or moderately varying analog measurements.
Is AD7467BRM suitable for sensor and industrial control applications?
The AD7467BRM is suitable for many sensor and industrial control applications that require moderate resolution and compact conversion. Its 10-bit resolution provides 1,024 code levels, its single input supports one analog measurement, and its 200 kSPS throughput is sufficient for many pressure, temperature, position, and process-control signals. A signal-conditioning stage may still be required to scale sensor outputs into the converter's input range.
What are the key specifications of AD7467BRM?
The AD7467BRM is a 10-bit, 200 kSPS, single-input SAR ADC operating from 1.6 V to 3.6 V in an 8-MSOP package. These figures define its core engineering role: a compact, low-voltage interface between an analog sensor or control signal and a digital controller. The Analog Devices product page identifies the AD7466, AD7467, and AD7468 as related 12-bit, 10-bit, and 8-bit converters.
Is AD7467BRM in stock and what is its lead time?
Current stock and lead time should be requested through the Request a Quote form on this page, where the exact package and manufacturing requirements can be confirmed. The AD7467BRM is listed in multiple online product catalogs, but catalog presence alone does not establish current inventory or a guaranteed delivery interval. Request an updated availability statement before committing the design to a production schedule.
How much does AD7467BRM cost?
Use the Request a Quote form on this page for the current AD7467BRM price, stock position, and volume-break information. Quote-based handling reflects changing semiconductor availability and package quantities, while the structured pricing data on this page is refreshed from qualifying catalog listings. The quote request should specify the required quantity, package form, and target delivery date.
Where can I buy AD7467BRM online?
The Request a Quote form on this page is the preferred route for obtaining AD7467BRM with current availability and commercial terms. Specify the quantity, desired shipping packaging, and production schedule so the quote reflects the correct assembled part. Verify the requested MPN as AD7467BRM because related AD7467 catalog suffixes can denote different packaging or lead-finish configurations.
What is the difference between AD7467BRM and AD7467BRMZ?
AD7467BRM and AD7467BRMZ belong to the same AD7467 converter family and use an 8-MSOP format, but their orderable suffixes identify different catalog or packaging configurations. The AD7467BRMZ entry is specifically presented as an 8-MSOP converter in the distributor record. For a drop-in production decision, confirm the suffix, package drawing, tape orientation, and moisture-handling requirements rather than relying only on the base converter number.
Does the AD7467BRM meet RoHS requirements?
The AD7467BRM is identified as RoHS-compliant in the product listing for the exact MPN. RoHS status concerns restricted substances in electrical and electronic equipment; it does not by itself establish automotive qualification, halogen-free status, or regulatory suitability for every end application. Use the manufacturer product page and the relevant compliance documentation for procurement and environmental reporting.

Technische Referenzdaten für AD7467BRM – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose AD7467BRM when a design needs a compact, single-channel SAR ADC with 10-bit resolution, operation from 1.6 V to 3.6 V, and throughput up to 200 kSPS. It is a practical general-purpose choice for industrial sensors, portable monitoring, process feedback, and embedded data acquisition. Select AD7466BRM when additional measurement granularity is valuable and the analog chain can support 12-bit performance; the same family package preserves footprint compatibility. Select AD7468BRM when minimizing data width and processing load matters more than resolution, accepting four times fewer quantization levels. Before replacing AD7467BRM with either alternative, verify acquisition timing, reference behavior, digital timing, absolute-maximum conditions, and firmware scaling. For new designs, also check whether one measured channel meets the system requirement or whether a multi-channel converter would reduce external switching and signal-conditioning complexity.

Vergleich mit Alternativen

Parameter Dieses Produkt AD7466BRM AD7468BRM
Brand Analog Devices Analog Devices Analog Devices
Package 8-MSOP 8-MSOP - same 8-MSOP - same
Resolution 10 bit 12 bit 8 bit
Conversion Architecture Successive approximation (SAR) Successive approximation (SAR) Successive approximation (SAR)
Throughput Rate Up to 200 kSPS Up to 200 kSPS Up to 200 kSPS
Input Channels 1 channel 1 channel 1 channel
Supply Voltage Range 1.6 V to 3.6 V 1.6 V to 3.6 V 1.6 V to 3.6 V
Conversion Code Count 1,024 levels 4,096 levels 256 levels
Relative Resolution Difference Baseline 20% more bit count than AD7467BRM 20% fewer bits than AD7467BRM

Wichtigste Unterscheidungsmerkmale

  • Balanced 10-bit resolution and family-level 200 kSPS throughput (vs. AD7468BRM)
  • Lower power per conversion than the 12-bit family member (vs. AD7466BRM)
  • Compact 8-MSOP integration (vs. AD7466BRM)
  • More measurement granularity than the 8-bit option (vs. AD7468BRM)

Designhinweise

Route the analog input directly from the source or front-end filter to the converter while keeping it away from digital clocks, fast serial-data traces, and switching-node copper. Use a continuous ground reference beneath the analog path where practical, and place input, reference, and bypass components close to their associated pins. The 8-MSOP footprint is compact, so a crowded escape route can make the analog trace susceptible to coupling from adjacent digital pins.

Verify source impedance and acquisition time at the selected conversion rate. A sensor divider or amplifier with excessive output impedance may not settle to the required accuracy before conversion. If the signal changes rapidly, use a lower-impedance driver or an appropriate sample-and-hold network. Treat the 10-bit output as 1,024 quantization levels, and calculate overall system error using ADC resolution, reference error, analog noise, and signal-chain linearity rather than ADC resolution alone.

Decouple the converter supply close to the device and follow the manufacturer's recommended capacitor network and layout. Operation from 1.6 V to 3.6 V makes supply sequencing important when the analog input can remain energized while the converter rail is off. Confirm the input and reference states during power-down, and use the datasheet's absolute-maximum ratings and power-up sequence before combining this ADC with other low-voltage blocks.

Do not select AD7467BRM solely because all three family devices use an 8-MSOP package. AD7466BRM provides 12-bit resolution and AD7468BRM provides 8-bit resolution, so software scaling, calibration, noise assumptions, and control performance can change even when the footprint remains the same. Confirm the exact orderable suffix, reference configuration, digital interface behavior, and acquisition requirements before treating either family member as a production replacement.

Compliance-Informationen

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The exact-MPN product listing identifies the AD7467BRM as RoHS-compliant. AEC-Q100 qualification is not claimed because this is an industrial/consumer ADC rather than an automotive-qualified variant.

Daten verifiziert am: 2026-11-18 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

AD7467BRM datasheet AD7467BRM pinout AD7467BRM datasheet pdf AD7467BRM specifications AD7467BRM equivalent AD7467BRM replacement AD7467BRM cross reference AD7467BRM vs AD7466BRM AD7467BRM vs AD7468BRM AD7467BRM 8-MSOP footprint AD7467BRM price AD7467BRM stock Analog Devices AD7467BRM AD7467BRM sensor application circuit AD7467BRM 10-bit 200kSPS ADC

Verwandte Bauteile & Begriffe

Analog Devices AD7467 AD7467BRM AD7466 AD7466BRM AD7468 AD7468BRM analog-to-digital converter ADC successive-approximation ADC SAR data-acquisition IC interface IC semiconductor 10-bit resolution 200 kSPS throughput 1.6 V to 3.6 V supply single analog input 8-MSOP MSOP family surface-mount package SMD quantization level RoHS
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen