AD7467BRM - 10-Bit 200 kSPS ADC | Analog Devices
MPN: AD7467BRM ✓ सक्रियAD7467BRM अवलोकन
An ADC is an interface IC that converts an analog voltage into a digital code. A successive-approximation ADC performs conversion by progressively comparing the input with a reference voltage. Within the broader semiconductor hierarchy, the AD7467BRM is an ADC, an interface IC, and a data-acquisition component. It is suited to sensors, industrial controls, instrumentation, and embedded systems that need continuous conversion rather than the very high throughput of a flash converter.
The principal specifications include 10-bit resolution, one analog input channel, operation from 1.6 V to 3.6 V, and throughput up to 200 kSPS. These characteristics place the device between low-resolution sensor interfaces and higher-resolution precision converters. The single 8-MSOP package also reduces board area compared with larger multi-channel converter packages, while the 1.6 V minimum supply supports compact low-voltage systems.
The AD7467 uses a successive-approximation conversion architecture. This architecture is appropriate when moderate conversion speed and low power consumption are more important than very high sampling rates. Analog Devices identifies the AD7466, AD7467, and AD7468 as related 12-bit, 10-bit, and 8-bit converters, respectively, allowing designers to select the resolution that matches the measurement requirement rather than using unnecessary conversion capacity.
Typical uses include battery-powered environmental sensors, temperature and pressure measurement front ends, analog control monitoring, portable instrumentation, and industrial data-acquisition modules. The 200 kSPS throughput allows the converter to sample rapidly varying analog signals, while the 10-bit code provides 1,024 quantization levels for general-purpose measurement and control.
The main design consideration is matching the input range, reference voltage, sampling network, and digital interface to the source signal. The analog input must remain within the converter's permitted operating range, and source impedance can affect acquisition time. PCB layout should keep analog and digital return paths controlled and place input, reference, and supply bypass components close to their associated pins.
This page combines the manufacturer's family-level specifications with package, application, replacement, and design guidance. It also identifies same-footprint resolution alternatives so engineers can assess whether AD7466BRM or AD7468BRM offers a more appropriate conversion resolution without changing the PCB footprint.
के लिए ड्रॉप-इन विकल्प AD7467BRM — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं AD7467BRM (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, Resolution, Throughput Rate.
AD7466BRM
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापितकीमत के लिए संपर्क करें
डेटाशीट देखें →AD7468BRM
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
AD7467BRM Maximum Ratings और Electrical Characteristics
| रेज़ोल्यूशन | 10 bit |
| Conversion Architecture | Successive approximation (SAR) |
| Throughput Rate | 200 kSPS |
| Input Channels | 1 channel |
| Supply Voltage Range | 1.6 V to 3.6 V |
| पैकेज | 8-MSOP |
| माउंटिंग प्रकार | Surface mount |
| RoHS स्थिति | Compliant |
AD7467BRM 8-msop पिन कॉन्फ़िगरेशन गाइड
AD7467BRM (8-msop पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: AD7467BRM.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
AD7467BRM के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Sensor Interface, Battery-Powered Environmental Monitoring, Process Control and Feedback Monitoring, Portable Test and Measurement, Motor and Position Feedback, Embedded Data Acquisition.
Industrial Sensor Interface
The AD7467BRM is appropriate for digitizing outputs from pressure, temperature, level, and position sensors when 10-bit resolution is adequate. Its 200 kSPS throughput provides ample conversion capacity for many slowly changing process signals, while the 1.6 V to 3.6 V supply range can simplify low-voltage instrumentation. A conditioning network should scale the sensor output into the ADC input range and limit source impedance where acquisition timing requires it. Compared with a 12-bit AD7466BRM, the AD7467BRM uses fewer digital code bits, so firmware should explicitly scale and round the converted values to the sensor's useful resolution rather than implying greater physical accuracy than the complete analog chain can deliver.
अनुशंसित
Battery-Powered Environmental Monitoring
The AD7467BRM fits compact environmental monitors that measure light, humidity, gas, or ambient-pressure sensor signals from a low-voltage battery-powered platform. Its single analog input and 8-MSOP package minimize board area, and operation begins at 1.6 V, which supports power budgets built around low-voltage rails. The 200 kSPS rate is substantially faster than the update rate of many environmental sensors, allowing the converter to be sampled as needed rather than continuously. System designers should disable or control the converter between measurements according to the manufacturer guidance, verify the input's settling behavior after power-up, and avoid assuming that the nominal 10-bit code count equals the final measurement precision of the sensor and conditioning network.
अनुशंसित
Process Control and Feedback Monitoring
The AD7467BRM can digitize a control or feedback signal in a compact industrial control module. Its 200 kSPS throughput is useful for monitoring faster events, while 10-bit resolution provides enough quantization levels for many position, actuator, and analog-loop signals. The ADC operates from the same broad 1.6 V to 3.6 V range used by the AD7466/AD7467/AD7468 family, simplifying rail planning when multiple interface blocks share a supply. For feedback control, input filtering should reject switching and communication noise while preserving the control bandwidth. Software should also include saturation handling and sensor-plausibility checks, since the converter's ten-bit resolution does not prevent overload or out-of-range operating conditions.
अनुशंसित
Portable Test and Measurement
The AD7467BRM supports compact handheld or portable measurement instruments that need a space-efficient analog input. The 8-MSOP package preserves PCB area for displays, controls, communication, and power management, while the 200 kSPS rate accommodates many probe, transducer, and calibration signals. The 10-bit result gives 1,024 quantization levels, which can be appropriate for general voltage or status measurement. Designers should place the analog input path away from digital switching nodes, use a stable reference arrangement, and account for acquisition time after selecting a new measurement channel. For instrumentation requiring finer quantization, the 12-bit AD7466BRM offers additional resolution in the same family format, but the complete measurement chain must support that improvement.
अनुशंसित
Motor and Position Feedback
The AD7467BRM can convert potentiometer, resolver-interface, or analog position feedback in compact motor-control electronics. Its 200 kSPS throughput is suitable for many servo, valve, and actuator feedback loops, and the 10-bit resolution offers a practical balance between control resolution, conversion speed, and package size. The analog front end should amplify and offset the sensor output into the converter's valid range while providing low noise around the position transition points. Firmware should calibrate endpoint mapping and account for mechanical nonlinearity. If position resolution is the dominant requirement, the 12-bit AD7466BRM provides 20% more bit count and may reduce quantization error, but it must be validated against loop bandwidth, noise, and total system error.
अनुशंसित
Embedded Data Acquisition
The AD7467BRM is useful in embedded data-acquisition modules that periodically sample one analog channel. The 1.6 V minimum supply voltage supports integration with low-voltage processors and sensors, while the 8-MSOP footprint leaves routing space for a microcontroller, digital interface, and protection components. Its 200 kSPS capability allows multiple samples to be captured for averaging or diagnostics, although the actual system rate is also constrained by source impedance, acquisition behavior, and digital transfer. The analog trace should be short and surrounded by a grounded reference plane where practical, with bypass components positioned close to the supply and reference pins. The 8-bit AD7468BRM may reduce digital payload size, whereas the AD7467BRM retains finer quantization for general-purpose logging.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा AD7467BRM — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | AD7466BRM | AD7468BRM |
|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Package | 8-MSOP | 8-MSOP - same | 8-MSOP - same |
| Resolution | 10 bit | 12 bit | 8 bit |
| Conversion Architecture | Successive approximation (SAR) | Successive approximation (SAR) | Successive approximation (SAR) |
| Throughput Rate | Up to 200 kSPS | Up to 200 kSPS | Up to 200 kSPS |
| Input Channels | 1 channel | 1 channel | 1 channel |
| Supply Voltage Range | 1.6 V to 3.6 V | 1.6 V to 3.6 V | 1.6 V to 3.6 V |
| Conversion Code Count | 1,024 levels | 4,096 levels | 256 levels |
| Relative Resolution Difference | Baseline | 20% more bit count than AD7467BRM | 20% fewer bits than AD7467BRM |
मुख्य विशेषताएँ
- Balanced 10-bit resolution and family-level 200 kSPS throughput (बनामAD7468BRM)
- Lower power per conversion than the 12-bit family member (बनामAD7466BRM)
- Compact 8-MSOP integration (बनामAD7466BRM)
- More measurement granularity than the 8-bit option (बनामAD7468BRM)
डिज़ाइन नोट्स
Route the analog input directly from the source or front-end filter to the converter while keeping it away from digital clocks, fast serial-data traces, and switching-node copper. Use a continuous ground reference beneath the analog path where practical, and place input, reference, and bypass components close to their associated pins. The 8-MSOP footprint is compact, so a crowded escape route can make the analog trace susceptible to coupling from adjacent digital pins.
Verify source impedance and acquisition time at the selected conversion rate. A sensor divider or amplifier with excessive output impedance may not settle to the required accuracy before conversion. If the signal changes rapidly, use a lower-impedance driver or an appropriate sample-and-hold network. Treat the 10-bit output as 1,024 quantization levels, and calculate overall system error using ADC resolution, reference error, analog noise, and signal-chain linearity rather than ADC resolution alone.
Decouple the converter supply close to the device and follow the manufacturer's recommended capacitor network and layout. Operation from 1.6 V to 3.6 V makes supply sequencing important when the analog input can remain energized while the converter rail is off. Confirm the input and reference states during power-down, and use the datasheet's absolute-maximum ratings and power-up sequence before combining this ADC with other low-voltage blocks.
Do not select AD7467BRM solely because all three family devices use an 8-MSOP package. AD7466BRM provides 12-bit resolution and AD7468BRM provides 8-bit resolution, so software scaling, calibration, noise assumptions, and control performance can change even when the footprint remains the same. Confirm the exact orderable suffix, reference configuration, digital interface behavior, and acquisition requirements before treating either family member as a production replacement.
अनुपालन जानकारी
The exact-MPN product listing identifies the AD7467BRM as RoHS-compliant. AEC-Q100 qualification is not claimed because this is an industrial/consumer ADC rather than an automotive-qualified variant.