AD7467BRM - 10-Bit 200 kSPS ADC | Analog Devices
MPN: AD7467BRM ✓ 啟用中AD7467BRM 概覽
An ADC is an interface IC that converts an analog voltage into a digital code. A successive-approximation ADC performs conversion by progressively comparing the input with a reference voltage. Within the broader semiconductor hierarchy, the AD7467BRM is an ADC, an interface IC, and a data-acquisition component. It is suited to sensors, industrial controls, instrumentation, and embedded systems that need continuous conversion rather than the very high throughput of a flash converter.
The principal specifications include 10-bit resolution, one analog input channel, operation from 1.6 V to 3.6 V, and throughput up to 200 kSPS. These characteristics place the device between low-resolution sensor interfaces and higher-resolution precision converters. The single 8-MSOP package also reduces board area compared with larger multi-channel converter packages, while the 1.6 V minimum supply supports compact low-voltage systems.
The AD7467 uses a successive-approximation conversion architecture. This architecture is appropriate when moderate conversion speed and low power consumption are more important than very high sampling rates. Analog Devices identifies the AD7466, AD7467, and AD7468 as related 12-bit, 10-bit, and 8-bit converters, respectively, allowing designers to select the resolution that matches the measurement requirement rather than using unnecessary conversion capacity.
Typical uses include battery-powered environmental sensors, temperature and pressure measurement front ends, analog control monitoring, portable instrumentation, and industrial data-acquisition modules. The 200 kSPS throughput allows the converter to sample rapidly varying analog signals, while the 10-bit code provides 1,024 quantization levels for general-purpose measurement and control.
The main design consideration is matching the input range, reference voltage, sampling network, and digital interface to the source signal. The analog input must remain within the converter's permitted operating range, and source impedance can affect acquisition time. PCB layout should keep analog and digital return paths controlled and place input, reference, and supply bypass components close to their associated pins.
This page combines the manufacturer's family-level specifications with package, application, replacement, and design guidance. It also identifies same-footprint resolution alternatives so engineers can assess whether AD7466BRM or AD7468BRM offers a more appropriate conversion resolution without changing the PCB footprint.
直接替換替代品,適用於 AD7467BRM — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: AD7467BRM (相同外形與佔位) — 差異在於 Package, Resolution, Throughput Rate.
AD7466BRM
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →AD7468BRM
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
AD7467BRM 最大額定值與電氣特性
| 解析度 | 10 bit |
| Conversion Architecture | Successive approximation (SAR) |
| Throughput Rate | 200 kSPS |
| Input Channels | 1 channel |
| Supply Voltage Range | 1.6 V to 3.6 V |
| 封裝 | 8-MSOP |
| 安裝類型 | Surface mount |
| RoHS 狀態 | Compliant |
AD7467BRM 8-msop 腳位配置指南
AD7467BRM(8-msop 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: AD7467BRM.
請參閱 資料表 以查看完整腳位配置。
典型應用
AD7467BRM 適用於 6 應用s: Industrial Sensor Interface, Battery-Powered Environmental Monitoring, Process Control and Feedback Monitoring, Portable Test and Measurement, Motor and Position Feedback, Embedded Data Acquisition.
Industrial Sensor Interface
The AD7467BRM is appropriate for digitizing outputs from pressure, temperature, level, and position sensors when 10-bit resolution is adequate. Its 200 kSPS throughput provides ample conversion capacity for many slowly changing process signals, while the 1.6 V to 3.6 V supply range can simplify low-voltage instrumentation. A conditioning network should scale the sensor output into the ADC input range and limit source impedance where acquisition timing requires it. Compared with a 12-bit AD7466BRM, the AD7467BRM uses fewer digital code bits, so firmware should explicitly scale and round the converted values to the sensor's useful resolution rather than implying greater physical accuracy than the complete analog chain can deliver.
推薦
Battery-Powered Environmental Monitoring
The AD7467BRM fits compact environmental monitors that measure light, humidity, gas, or ambient-pressure sensor signals from a low-voltage battery-powered platform. Its single analog input and 8-MSOP package minimize board area, and operation begins at 1.6 V, which supports power budgets built around low-voltage rails. The 200 kSPS rate is substantially faster than the update rate of many environmental sensors, allowing the converter to be sampled as needed rather than continuously. System designers should disable or control the converter between measurements according to the manufacturer guidance, verify the input's settling behavior after power-up, and avoid assuming that the nominal 10-bit code count equals the final measurement precision of the sensor and conditioning network.
推薦
Process Control and Feedback Monitoring
The AD7467BRM can digitize a control or feedback signal in a compact industrial control module. Its 200 kSPS throughput is useful for monitoring faster events, while 10-bit resolution provides enough quantization levels for many position, actuator, and analog-loop signals. The ADC operates from the same broad 1.6 V to 3.6 V range used by the AD7466/AD7467/AD7468 family, simplifying rail planning when multiple interface blocks share a supply. For feedback control, input filtering should reject switching and communication noise while preserving the control bandwidth. Software should also include saturation handling and sensor-plausibility checks, since the converter's ten-bit resolution does not prevent overload or out-of-range operating conditions.
推薦
Portable Test and Measurement
The AD7467BRM supports compact handheld or portable measurement instruments that need a space-efficient analog input. The 8-MSOP package preserves PCB area for displays, controls, communication, and power management, while the 200 kSPS rate accommodates many probe, transducer, and calibration signals. The 10-bit result gives 1,024 quantization levels, which can be appropriate for general voltage or status measurement. Designers should place the analog input path away from digital switching nodes, use a stable reference arrangement, and account for acquisition time after selecting a new measurement channel. For instrumentation requiring finer quantization, the 12-bit AD7466BRM offers additional resolution in the same family format, but the complete measurement chain must support that improvement.
推薦
Motor and Position Feedback
The AD7467BRM can convert potentiometer, resolver-interface, or analog position feedback in compact motor-control electronics. Its 200 kSPS throughput is suitable for many servo, valve, and actuator feedback loops, and the 10-bit resolution offers a practical balance between control resolution, conversion speed, and package size. The analog front end should amplify and offset the sensor output into the converter's valid range while providing low noise around the position transition points. Firmware should calibrate endpoint mapping and account for mechanical nonlinearity. If position resolution is the dominant requirement, the 12-bit AD7466BRM provides 20% more bit count and may reduce quantization error, but it must be validated against loop bandwidth, noise, and total system error.
推薦
Embedded Data Acquisition
The AD7467BRM is useful in embedded data-acquisition modules that periodically sample one analog channel. The 1.6 V minimum supply voltage supports integration with low-voltage processors and sensors, while the 8-MSOP footprint leaves routing space for a microcontroller, digital interface, and protection components. Its 200 kSPS capability allows multiple samples to be captured for averaging or diagnostics, although the actual system rate is also constrained by source impedance, acquisition behavior, and digital transfer. The analog trace should be short and surrounded by a grounded reference plane where practical, with bypass components positioned close to the supply and reference pins. The 8-bit AD7468BRM may reduce digital payload size, whereas the AD7467BRM retains finer quantization for general-purpose logging.
推薦
推薦產品摘要
工程參考資料,適用於 AD7467BRM — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | AD7466BRM | AD7468BRM |
|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Package | 8-MSOP | 8-MSOP - same | 8-MSOP - same |
| Resolution | 10 bit | 12 bit | 8 bit |
| Conversion Architecture | Successive approximation (SAR) | Successive approximation (SAR) | Successive approximation (SAR) |
| Throughput Rate | Up to 200 kSPS | Up to 200 kSPS | Up to 200 kSPS |
| Input Channels | 1 channel | 1 channel | 1 channel |
| Supply Voltage Range | 1.6 V to 3.6 V | 1.6 V to 3.6 V | 1.6 V to 3.6 V |
| Conversion Code Count | 1,024 levels | 4,096 levels | 256 levels |
| Relative Resolution Difference | Baseline | 20% more bit count than AD7467BRM | 20% fewer bits than AD7467BRM |
主要差異化特點
- Balanced 10-bit resolution and family-level 200 kSPS throughput (對比AD7468BRM)
- Lower power per conversion than the 12-bit family member (對比AD7466BRM)
- Compact 8-MSOP integration (對比AD7466BRM)
- More measurement granularity than the 8-bit option (對比AD7468BRM)
設計說明
Route the analog input directly from the source or front-end filter to the converter while keeping it away from digital clocks, fast serial-data traces, and switching-node copper. Use a continuous ground reference beneath the analog path where practical, and place input, reference, and bypass components close to their associated pins. The 8-MSOP footprint is compact, so a crowded escape route can make the analog trace susceptible to coupling from adjacent digital pins.
Verify source impedance and acquisition time at the selected conversion rate. A sensor divider or amplifier with excessive output impedance may not settle to the required accuracy before conversion. If the signal changes rapidly, use a lower-impedance driver or an appropriate sample-and-hold network. Treat the 10-bit output as 1,024 quantization levels, and calculate overall system error using ADC resolution, reference error, analog noise, and signal-chain linearity rather than ADC resolution alone.
Decouple the converter supply close to the device and follow the manufacturer's recommended capacitor network and layout. Operation from 1.6 V to 3.6 V makes supply sequencing important when the analog input can remain energized while the converter rail is off. Confirm the input and reference states during power-down, and use the datasheet's absolute-maximum ratings and power-up sequence before combining this ADC with other low-voltage blocks.
Do not select AD7467BRM solely because all three family devices use an 8-MSOP package. AD7466BRM provides 12-bit resolution and AD7468BRM provides 8-bit resolution, so software scaling, calibration, noise assumptions, and control performance can change even when the footprint remains the same. Confirm the exact orderable suffix, reference configuration, digital interface behavior, and acquisition requirements before treating either family member as a production replacement.
合規資訊
The exact-MPN product listing identifies the AD7467BRM as RoHS-compliant. AEC-Q100 qualification is not claimed because this is an industrial/consumer ADC rather than an automotive-qualified variant.