Analog Devices

AD842KN - 80 MHz Wideband Current-Feedback Op Amp | Analog Devices

Teilenummer: AD842KN ✓ Aktiv
±5 V to ±18 V Vdss 6 uA typical Id 14-pin PDIP Package
MOQ: 1 |

AD842KN Übersicht

The Analog Devices AD842KN is a wideband, high-output-current operational amplifier built on the junction-isolated complementary bipolar, or CB, process. It combines an 80 MHz gain-bandwidth product with a 14-pin PDIP package, making it suitable for instrumentation, signal-conditioning, and pulse-processing circuits that require fast settling and low distortion. The AD842KN is designed for operation from dual ±5 V to ±18 V supplies, as identified in its product documentation.

An operational amplifier is an active analog circuit that uses high open-loop gain and negative feedback to amplify a differential input signal. The AD842 belongs to the current-feedback amplifier family. Current-feedback amplifiers divide a high-gain stage into an inverting input and a non-inverting input, allowing the closed-loop bandwidth to remain relatively stable as closed-loop gain changes. Within the broader signal-chain hierarchy, the AD842 sits between general-purpose voltage-feedback amplifiers and dedicated instrumentation, buffer, and line-driver circuits.

The AD842 family's main differentiators include its 80 MHz gain-bandwidth product, wideband operation, and ability to deliver comparatively high output current. These characteristics make it useful when driving moderate capacitance, driving low-impedance loads, or processing large-amplitude transient signals. Analog Devices identifies the CB process as the enabling technology for combining DC precision with wideband AC performance that was previously difficult to achieve in a monolithic operational amplifier.

The device is available in a 14-pin PDIP package for through-hole PCB assembly. Because it is a high-speed bipolar amplifier, board construction and decoupling strongly affect usable performance. Short feedback traces, a clean ground plane, and local supply bypassing help preserve the intended settling behavior and minimize RF pickup. A feedback resistor should be selected to match the source impedance and the load being driven rather than treating the amplifier as a voltage-only generic part.

Typical applications include laboratory instrumentation, current-to-voltage conversion, waveform conditioning, video and pulse-signal conditioning, and active analog filtering. It is particularly appropriate when the signal source is low impedance and the following stage requires a high-current output. The 14-pin through-hole package also simplifies prototype assembly and repair on laboratory or legacy industrial boards.

When designing around the AD842KN, verify gain-bandwidth behavior for the selected closed-loop gain and confirm that the load current and capacitive loading remain within the device operating limits. Stable feedback components, balanced trace geometry, and separate analog return paths are more important than minimizing board area alone. The device should also be evaluated for overload recovery and output saturation if the expected input waveform can exceed the intended operating range.

This page combines the manufacturer specifications, verified package information, pin-compatible family options, comparison data, and practical layout guidance so that engineers can evaluate the AD842KN against other wideband amplifiers before committing a design to production.

Drop-in-Alternativen für AD842KN – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit AD842KN (gleiche Bauform und Footprint) – abweichend in Gain-Bandwidth Product.

Analog Devices
Gain-Bandwidth Product: 80 MHz at gain of 2
Vergleichen mit AD842KN →

AD842KNZ

✅ Drop-In
📦 14-PDIP
Lead-free ordering code for the same 14-PDIP package; confirm temperature grade and exact guaranteed limits

📋 Referenzalternative (nicht im Katalog)

AD842JN

✅ Drop-In
Analog Devices
📦 14-PDIP
Single wideband precision operational amplifier · 80 MHz · 2 · +/-5 V to +/-18 V · 100 mA

Preis auf Anfrage

Datenblatt ansehen →

AD842KH

✅ Drop-In ⚠️ Spezifikationen ungeprüft
Analog Devices
📦 14-PDIP
Single-channel operational amplifier · 80 MHz at gain of 2 · 375 V/µs · 0.01% settling for a 10 V step · 6.0 MHz at 20 V peak-to-peak output · 1 mV · 1.5 mV · 2

Preis auf Anfrage

Datenblatt ansehen →

AD842KN Grenzwerte & elektrische Eigenschaften

Product Type Wideband operational amplifier
Amplifier Architecture Current-feedback amplifier
Process Technology Junction-isolated complementary bipolar (CB) process
Number of Circuits 1 amplifier
Gain-Bandwidth Product 80 MHz
Supply Voltage Range ±5 V to ±18 V
Package Type 14-pin PDIP
Package Dimensions 0.300 inch (7.62 mm) body width
Montageart Through-hole
Input Offset Voltage 1500 uV maximum
Versorgungsstrom 6 uA typical
Input Noise Current 3.5 uA
Common-Mode Rejection 115 dB
RoHS-Status unknown
REACH Status unknown

AD842KN 0.300 inch (7.62 mm) body width Pinbelegungsleitfaden

Pinbelegung für AD842KN (0.300 inch (7.62 mm) body width-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.

Pinbelegungsdiagramm für AD842KN im 0.300 inch (7.62 mm) body width-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für AD842KN.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

AD842KN ist geeignet für 6 Anwendungs: Laboratory Instrumentation and Buffering, Pulse and Fast Transient Signal Conditioning, Active Analog Filtering, Current-to-Voltage Conversion, Video and RF-Interface Conditioning, Industrial Control and Legacy Through-Hole Boards.

🔧

Laboratory Instrumentation and Buffering

The AD842KN fits laboratory front ends that must buffer a low-impedance source before an ADC, oscilloscope, or analyzer. Its 80 MHz gain-bandwidth product provides substantially more bandwidth than a conventional precision op amp, while the current-feedback architecture supports rapid settling through moderate gain stages. The high-output-current capability is useful when the following stage presents a lower input impedance. Keep the feedback resistor close to the inverting input, provide local supply bypassing, and verify settling with the intended source and load. Temperature-range and offset-voltage requirements should also be checked when laboratory equipment operates across wide ambient conditions.

📡

Pulse and Fast Transient Signal Conditioning

Use the AD842KN where pulse edges and fast transients must be amplified without the severe slew-rate limitation associated with many general-purpose op amps. The 80 MHz gain-bandwidth product and high-output-current design let the amplifier charge moderate parasitic capacitance and drive practical downstream loads. Because current-feedback amplifiers depend strongly on correct feedback-network values, select the feedback resistor using the gain and source-impedance relationship in the manufacturer datasheet. Add a small output isolation resistor when driving capacitive cabling, and keep the feedback trace short to avoid oscillation or irregular settling.

🌐

Active Analog Filtering

The AD842KN can serve as the active element in wideband filter sections where conventional voltage-feedback amplifiers do not provide adequate bandwidth or drive strength. Current-feedback amplifiers are particularly useful in low-impedance filter topologies because their gain-bandwidth relationship differs from that of voltage-feedback devices. The AD842's 80 MHz gain-bandwidth product supports higher-frequency signal paths, although actual usable bandwidth must be checked against the selected closed-loop gain and feedback resistor. Validate component tolerances and parasitic capacitance in simulation, and maintain short routing around the high-impedance summing node to preserve stability.

⚡

Current-to-Voltage Conversion

The AD842KN is appropriate for current-to-voltage conversion stages in sensor and test systems where a low-impedance current source must drive a feedback network. Its high-output-current capability reduces the distortion that can occur when the required conversion resistor produces a small signal node with a fast-changing load. Keep the sense resistor close to the amplifier's inverting input and return its current directly to the amplifier ground rather than through a shared noisy trace. Verify input common-mode range and output swing against the expected sensor current, and add a dedicated zero-input trim path when the measurement system requires accurate offset calibration.

🌐

Video and RF-Interface Conditioning

The AD842KN can condition low-level signals in video, communications, and RF test interfaces when the downstream path requires a stronger, faster output than a general-purpose amplifier can provide. Its 80 MHz gain-bandwidth product makes it relevant to baseband signal conditioning, although RF applications still require careful frequency-response analysis at the actual operating frequency. Use short, controlled-impedance traces, keep the feedback loop compact, and provide a stable reference plane to reduce radiated coupling. Decouple each supply rail locally, and check the amplifier's stability with the cable, connector, and termination that will be present in the finished system.

🏭

Industrial Control and Legacy Through-Hole Boards

The 14-pin PDIP package makes the AD842KN useful for industrial control, test equipment, and legacy through-hole boards where a surface-mount amplifier would require layout changes. The wideband current-feedback architecture supports signal paths that need more speed than conventional controller amplifiers, and the through-hole package remains practical for prototypes and low- to medium-volume assemblies. Confirm the exact temperature grade for industrial environmental conditions and verify that the supply rails remain within ±5 V to ±18 V. Prototype boards should include local bypass capacitors and a ground arrangement that does not force high-current return paths through sensitive signal wiring.

What is the AD842KN used for?
The AD842KN is a wideband, high-output-current current-feedback operational amplifier used for fast analog signal conditioning. It provides an 80 MHz gain-bandwidth product and operates from dual ±5 V to ±18 V supplies according to the Analog Devices product page. Typical uses include instrumentation, pulse conditioning, active filtering, and driving moderate loads where a general-purpose voltage-feedback amplifier would settle too slowly.
What are the key specifications of AD842KN that engineers should know?
The AD842KN combines an 80 MHz gain-bandwidth product, a 14-pin PDIP package, and dual ±5 V to ±18 V operation. Analog Devices describes it as a wideband, high-output-current amplifier fabricated using the junction-isolated complementary bipolar process. The family also lists a 1500 uV maximum input offset voltage, 115 dB common-mode rejection, and 3.5 uA input noise current for gain-setting and precision-planning calculations.
Is the AD842KN a voltage-feedback or current-feedback amplifier?
The AD842KN is a current-feedback operational amplifier. In a current-feedback topology, the inverting and non-inverting inputs feed separate gain stages, so closed-loop bandwidth varies differently with gain than it does in a conventional voltage-feedback amplifier. Its wideband architecture makes it suitable for pulse and instrumentation signals that require fast settling. Feedback-network selection should follow the current-feedback guidance in the manufacturer datasheet.
Where can I download the AD842KN datasheet PDF?
The official AD842 datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/AD842.pdf. It is the appropriate document for checking the exact electrical characteristics, package drawing, absolute maximum ratings, and test conditions associated with the AD842 family. The manufacturer product page at https://www.analog.com/en/products/ad842.html provides the corresponding ordering and lifecycle information.
What is the pinout of the AD842KN?
The AD842KN is packaged in a 14-pin PDIP, and its complete pin-assignment table appears in the pin-description section of the Analog Devices AD842 datasheet. Use that table when assigning supply, feedback, input, and output PCB connections. The AD842 family also uses configuration-dependent connections in some gain settings, so copying a board from a related amplifier without checking the exact AD842 schematic is not recommended.
What is the best drop-in replacement for the AD842KN?
The AD842KNZ is the closest verified package-compatible option because it is also offered as a 14-PDIP amplifier by Analog Devices. The AD842JN is another 14-pin PDIP member of the same family, although its temperature-grade designation differs from the AD842KN. For any substitution, confirm pinout, supply range, gain-bandwidth product, offset voltage, and temperature grade before treating it as a drop-in replacement.
Can AD842KNZ replace AD842KN without PCB changes?
AD842KNZ is a 14-PDIP option from the same AD842 family, so it is the most direct package-compatible candidate for an AD842KN replacement. The AD842KNZ designation also indicates a lead-free finish. Before substituting it, verify the exact electrical limits, temperature grade, and ordering code against the application requirements; identical packaging does not by itself guarantee identical qualification.
AD842KN vs AD842JN — which is the better choice?
Choose the AD842KN when the required temperature grade matches that part and the design is tied to its exact ordering configuration. Choose the AD842JN when its temperature grade better suits the deployment and it is otherwise acceptable for the circuit. Both are 14-pin PDIP current-feedback amplifiers in the same AD842 family, so the comparison should focus on temperature rating and guaranteed limits rather than package compatibility.
When should I choose AD842KN instead of a general-purpose op amp?
Choose the AD842KN when the signal requires wideband behavior, rapid settling, or the drive capability associated with a high-output-current amplifier. Its 80 MHz gain-bandwidth product and current-feedback architecture make it stronger than a generic precision op amp for waveforms and impedance levels where the generic part would become slew-rate or drive limited. For low-frequency precision signals, a lower-noise DC-focused amplifier may be a better fit.
Is AD842KN suitable for laboratory instrumentation?
Yes, the AD842KN is well matched to laboratory instrumentation that handles low-impedance sources and wideband waveforms. Its 80 MHz gain-bandwidth product provides useful bandwidth for oscilloscope drivers, buffer stages, and signal-conditioning blocks, while the high-output-current capability helps drive downstream stages. Stable operation still depends on selecting the feedback resistor correctly, terminating unused inputs, and keeping feedback traces short.
How should the AD842KN PCB layout be optimized for stability?
Keep input, feedback, output, and ground connections short, and place supply-decoupling capacitors close to the relevant package pins. Use a continuous ground plane for the analog return path and avoid routing the feedback return beneath noisy switching nodes. Because the AD842KN is a wideband bipolar amplifier, long traces and high-impedance nodes can pick up RF energy. Follow the layout and decoupling recommendations in the manufacturer datasheet for production designs.
Does the AD842KN require dual power supplies?
The AD842KN is specified for dual ±5 V to ±18 V operation, so its standard application uses positive and negative supply rails referenced to ground. Its output can therefore swing around the midpoint without the restrictions imposed by a single-supply, rail-to-rail device. Confirm that both rails, total supply span, output-current demand, and common-mode range remain inside the datasheet limits for the specific circuit configuration.
How does the AD842KN behave with capacitive or low-impedance loads?
The AD842 family's high-output-current design makes it more capable than many general-purpose amplifiers when driving moderate loads. Its wideband current-feedback architecture still requires careful feedback-component selection, and excessive capacitance can affect stability or settling. Keep the load connection short, place any isolation or termination resistor close to the output, and verify the complete amplifier-and-load configuration experimentally rather than relying on nominal gain-bandwidth figures alone.
Where can I buy the AD842KN and check current availability?
Use the Request a Quote form on this page to ask for AD842KN availability, lot conditions, and current lead time. A direct inquiry is the most reliable way to confirm whether the 14-pin PDIP inventory is active for your assembly schedule. Provide the required quantity, date code preference, and target destination so procurement can return an actionable quotation rather than a generic listing.
What is the lead time for the AD842KN?
Current lead time for the AD842KN depends on available factory and distribution inventory, package configuration, and order quantity. Submit the required quantity and target assembly date through the Request a Quote form on this page. The manufacturer product page and AD842 family documentation remain the authoritative references for product status, while a quotation confirms the supply position for the specific order.
Is the AD842KN RoHS compliant and automotive qualified?
The AD842KN is a general-purpose 14-pin PDIP instrumentation amplifier rather than an automotive-qualified grade. RoHS and REACH status should be confirmed for the exact ordering code through the Analog Devices product page or the compliance documentation linked from it. Do not infer automotive qualification from the AD842 family name; use a variant that explicitly carries the required automotive qualification when that qualification is mandatory.

Technische Referenzdaten für AD842KN – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the AD842KN for wideband signal-conditioning, instrumentation, pulse-processing, and active-filter circuits that need more bandwidth and output-drive capability than a conventional precision op amp provides. Its 80 MHz gain-bandwidth product, current-feedback architecture, and 14-PDIP package are most valuable when the source impedance is low, the load is practical but not extremely demanding, and PCB changes are undesirable. Use AD842KNZ when the lead-free 14-PDIP configuration matches procurement requirements; it is the closest package-compatible option identified. Consider AD842JN when its temperature-grade designation better fits the deployment, while keeping the same PDIP footprint. Do not substitute surface-mount AD842 variants without a PCB redesign. For low-frequency, low-noise precision measurements where wideband drive capability is unnecessary, a dedicated precision amplifier will usually provide a better noise and offset tradeoff.

Vergleich mit Alternativen

Parameter Dieses Produkt AD842KNZ AD842JN AD842K
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Package 14-PDIP 14-PDIP - same 14-PDIP - same 14-PDIP - same
Amplifier Architecture Current-feedback operational amplifier Current-feedback operational amplifier Current-feedback operational amplifier Current-feedback operational amplifier
Mounting Type Through-hole Through-hole Through-hole Through-hole

Wichtigste Unterscheidungsmerkmale

  • Wideband current-feedback performance in a through-hole package (vs. AD8005ARZ)
  • Higher output-drive capability than precision-oriented amplifiers (vs. AD7492BRZ)
  • Direct package-compatible family sourcing (vs. AD842JN)

Designhinweise

Treat the AD842KN as a high-speed analog component even though it uses a through-hole package. Place supply-bypass capacitors close to the device pins, provide an uninterrupted ground plane beneath and around the amplifier, and route the inverting input directly to the feedback resistor. Long loops around the feedback network can pick up RF signals and produce instability that is mistaken for a defective device.

Select the feedback resistor according to the current-feedback gain equation and source impedance in the Analog Devices datasheet rather than copying a voltage-feedback amplifier's resistor value. Keep the feedback components physically small and close to the relevant pins, and terminate unused inputs in accordance with the recommended configuration. When driving a cable or capacitive load, place a small isolation resistor at the output and verify settling in the complete system.

The AD842KN operates from dual ±5 V to ±18 V supplies. Check total supply span, output swing, and output-current demand against the application, and avoid using a ±18 V rail when the circuit only requires lower voltage. Place decoupling across each supply rail at the package, use separate return paths for high-current output returns, and test startup and overload recovery with the actual source and load attached.

Do not treat the 80 MHz gain-bandwidth product as a guaranteed 80 MHz closed-loop bandwidth at every gain setting or load. Current-feedback bandwidth also depends on the feedback resistor, source impedance, gain, and output loading. A 14-pin PDIP version may also differ from closely related SOIC members in thermal behavior and temperature-grade limits, so every pin and ordering-code substitution must be checked against the exact AD842 datasheet.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

Compliance declarations are not stated on the AD842 family pages identified for this part. The AD842KNZ ordering code indicates a lead-free finish, but formal RoHS, REACH, and halogen-free status should be confirmed for the exact orderable part. The standard AD842KN is not presented as an automotive-qualified variant.

Daten verifiziert am: 2026-11-18 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

AD842KN datasheet AD842KN datasheet pdf AD842KN pinout AD842KN specifications Analog Devices AD842KN AD842KN 80 MHz amplifier AD842KN 14-DIP package AD842KN equivalent AD842KN drop-in replacement AD842KN vs AD842JN AD842KN current feedback amplifier AD842KN instrumentation amplifier AD842KN price AD842KN stock how to replace AD842KN

Verwandte Bauteile & Begriffe

Analog Devices AD842KN AD842KNZ AD842JN AD842K AD842 operational amplifier current-feedback amplifier voltage-feedback amplifier analog signal conditioning gain-bandwidth product input offset voltage common-mode rejection input noise current complementary bipolar process junction-isolated complementary bipolar wideband amplifier instrumentation amplifier active filter pulse signal conditioning PDIP-14 through-hole package dual supply operation
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen