AKM (Asahi Kasei Microdevices)

AK4421ET 24-Bit 192kHz Stereo DAC with 2Vrms Output | AKM

Teilenummer: AK4421ET ✓ Aktiv
3.3 V Vdss
MOQ: 1 |

AK4421ET Übersicht

Asahi Kasei Microdevices AK4421ET is a 24-bit stereo digital-to-analog converter operating from a 3.3 V supply, with a maximum sampling rate of 192 kHz and an integrated 2 Vrms output buffer. The device uses a multi-bit delta-sigma modulator architecture intended to improve conversion linearity, dynamic range, and low-level signal behavior while supporting a 102 dB dynamic-range specification.

A digital-to-analog converter, or DAC, is a mixed-signal semiconductor that converts digital audio samples into an analog voltage waveform. Audio DACs belong to the broader ADC/DAC and signal-conversion IC hierarchy, where they sit between a digital audio source and an analog output stage. The AK4421ET combines digital interpolation and conversion functions with a buffered analog output to produce ground-referenced stereo audio signals.

The AK4421ET supports 192 kHz operation and 24-bit resolution for high-resolution audio paths. Its integrated output buffer delivers a 2 Vrms output into the supported load, reducing the need for a separate line-output amplifier in many designs. A charge pump in the output buffer creates an internal negative supply rail, enabling ground-referenced operation. This architecture simplifies balanced or differential signal generation while preserving a full-scale output centered on ground.

The precision multi-bit delta-sigma modulator suppresses quantization noise at low signal levels and supports consistent conversion performance across the signal range. The resulting 102 dB dynamic range is relevant to audio systems requiring high signal-to-noise performance. By combining the converter, digital filtering, output buffer, and charge pump in one device, the AK4421ET can reduce external component count and simplify analog routing in compact audio equipment.

Typical applications include high-resolution audio players, digital mixing consoles, headphone amplifier input stages, professional audio interfaces, home-theater equipment, and musical-instrument signal chains. It is also suitable for test and measurement systems that require a low-noise stereo analog source with a standard digital audio interface. The 192 kHz capability is particularly useful for high-resolution source material and oversampled signal paths.

The main design consideration is analog-output implementation. The output buffer and charge pump require careful decoupling, short analog traces, and clean grounding to preserve dynamic-range performance. The board should also provide stable 3.3 V digital and analog supplies while keeping switching-converter noise away from the DAC output. Confirm supported digital interfaces, clocking requirements, and load limitations against the manufacturer datasheet before finalizing the schematic.

Drop-in-Alternativen für AK4421ET – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Für dieses Produkt sind keine Drop-in-Alternativen verfügbar.

Alternativen anfordern

AK4421ET Grenzwerte & elektrische Eigenschaften

Product Type 24-bit stereo digital-to-analog converter
Versorgungsspannung 3.3 V
Bit Resolution 24 bit
Maximum Sampling Rate 192 kHz
Number of Channels 2 channels
Ausgangskonfiguration Stereo
Full-Scale Output 2 Vrms
Dynamic Range 102 dB
Converter Architecture Multi-bit delta-sigma modulator
Output Buffer Integrated 2 Vrms output buffer
Internal Rail Charge-pump-generated negative supply rail
Output Reference Ground referenced

AK4421ET standard Pinbelegungsleitfaden

Pinbelegung für AK4421ET (standard-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.

Pinbelegungsdiagramm für AK4421ET im standard-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für AK4421ET.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

AK4421ET ist geeignet für 6 Anwendungs: High-Resolution Audio Player, Professional Audio Interface, Headphone Amplifier Input Stage, Digital Mixing Console, Home-Theater Audio Equipment, Musical Instrument and Recording Equipment.

🎧

High-Resolution Audio Player

The AK4421ET fits a high-resolution audio player that accepts 24-bit digital audio and supports sampling rates up to 192 kHz. Its multi-bit delta-sigma modulator provides a 102 dB dynamic-range specification, while the integrated 2 Vrms output buffer produces a ground-referenced stereo analog signal. The buffer charge pump supplies the internal negative rail needed by the output stage. This reduces the number of separate analog functions required between the digital decoder and a line-level amplifier, although output filtering and grounding must follow the manufacturer’s reference circuit.

🎙️

Professional Audio Interface

In a professional audio interface, the AK4421ET can convert two digital channels into balanced or differential analog outputs at up to 192 kHz sampling rate. Its 102 dB dynamic range and 24-bit conversion capability support high-resolution capture and monitoring paths, while the integrated 2 Vrms buffer simplifies output-drive design. The analog section should use short traces, a carefully chosen low-pass filter, and a ground arrangement that prevents converter and interface-control return currents from disturbing the output signal.

🎧

Headphone Amplifier Input Stage

The AK4421ET is suitable as the digital-to-analog stage ahead of a headphone amplifier because its integrated 2 Vrms buffer can drive the amplifier input without a separate line-output buffer. The 24-bit, 192 kHz capability preserves high-resolution source data, and the charge-pump-assisted output architecture supports ground-referenced stereo signaling. Design the input coupling and gain structure carefully, maintain short analog traces, and confirm the supported output load before omitting any additional driver stage.

🏭

Digital Mixing Console

A digital mixing console can use the AK4421ET for stereo monitor or line-output conversion where a 24-bit data path and sampling rates up to 192 kHz are useful. The multi-bit delta-sigma architecture targets improved linearity and dynamic-range consistency, while the integrated output buffer helps preserve a compact analog signal path. Console layouts should isolate the DAC output from switching power stages, use star-ground or otherwise documented grounding practices, and provide filtering selected for the required audio bandwidth.

📺

Home-Theater Audio Equipment

The AK4421ET can support high-resolution stereo outputs in home-theater receivers, music streamers, and powered speakers when the digital source provides 24-bit audio at up to 192 kHz. Its ground-referenced 2 Vrms outputs simplify connection to line-input stages, and the 102 dB dynamic-range specification is useful for low-level passages and quiet mastering tracks. A practical implementation should include the manufacturer-recommended output filter, clean analog grounding, and isolation from display, power-supply, and amplifier switching noise.

🔧

Musical Instrument and Recording Equipment

The AK4421ET can serve as a stereo digital output for electronic instruments, recording accessories, and signal-processing equipment requiring 24-bit conversion and a maximum sampling rate of 192 kHz. Its integrated 2 Vrms buffer offers a straightforward interface to line-level circuitry while reducing external analog stages. For recording-quality results, validate clock jitter and interface timing, use a differential output arrangement where appropriate, and keep the analog return path separate from high-current output and switching circuitry.

What are the key specifications of AK4421ET that engineers should know?
The AK4421ET is a 3.3 V, 24-bit stereo DAC with a maximum sampling rate of 192 kHz and an integrated 2 Vrms output buffer. According to the manufacturer datasheet, it uses a precision multi-bit delta-sigma modulator and provides a 102 dB dynamic-range specification. Its output-buffer charge pump develops an internal negative rail, allowing ground-referenced 2 Vrms outputs. These characteristics make it suitable for high-resolution audio equipment, professional audio interfaces, and precision stereo signal sources.
What is the AK4421ET used for?
The AK4421ET is used to convert digital audio data into two analog output channels. According to the manufacturer datasheet, it provides 24-bit conversion, supports sampling rates up to 192 kHz, and integrates a 2 Vrms output buffer. Typical uses include high-resolution audio players, mixing consoles, audio interfaces, home-theater products, headphone-amplifier inputs, and test equipment requiring a ground-referenced stereo analog source.
Does the AK4421ET include an output buffer?
Yes, the AK4421ET includes a 2 Vrms output buffer. According to the manufacturer datasheet, a charge pump within the buffer generates an internal negative power-supply rail, permitting ground-referenced 2 Vrms stereo outputs. Integrating this function can reduce the need for a separate line-output stage, although the final load, coupling network, and output-filter implementation must still be designed against the datasheet requirements.
What resolution and sampling rate does AK4421ET support?
The AK4421ET supports 24-bit digital audio resolution and a maximum sampling rate of 192 kHz. The manufacturer identifies the device as a 3.3 V, 24-bit stereo DAC with a 2 Vrms output. Its multi-bit delta-sigma modulator is designed to improve conversion linearity and dynamic-range consistency at low signal levels, making the converter appropriate for high-resolution playback and professional audio signal paths.
Where can I download the AK4421ET datasheet PDF?
The AK4421ET datasheet can be downloaded from the manufacturer-linked product information and the datasheet listing identified on this page. The manufacturer describes the AK4421ET as a 192 kHz, 24-bit stereo DAC with a 2 Vrms output and documents the multi-bit modulator, integrated output buffer, charge pump, and ground-referenced output architecture. Use the pin-description, electrical-characteristics, and application-circuit sections when assigning connections and decoupling.
Where is the AK4421ET pinout located?
The AK4421ET pin assignments are located in the pin-description table of the manufacturer datasheet. Use that table when assigning digital audio inputs, clock signals, power rails, analog outputs, and ground connections. The package drawing and exposed-pad requirements must also be followed exactly during PCB layout so that assembly, soldering, and analog-output routing match the manufacturer’s recommendations.
Is the AK4421ET suitable for high-resolution audio equipment?
The AK4421ET is suitable for high-resolution audio equipment because it supports 24-bit conversion at rates up to 192 kHz and specifies 102 dB dynamic range. Its integrated 2 Vrms output buffer can feed a downstream line stage or amplifier input directly under the specified load conditions. For demanding designs, preserve short output paths, use appropriate output filtering, and maintain a clean analog ground and supply arrangement.
How does AK4421ET compare with AK4421AET?
The AK4421AET is a closely named AKM-family part that appears in cross-reference results, but the published material does not establish that it has the same package or pin configuration as the AK4421ET. A board-level replacement therefore requires checking the AK4421AET datasheet for package dimensions, pin names, supply requirements, digital-interface compatibility, and clock behavior. Treat it as a candidate only until those electrical and mechanical requirements are confirmed.
What is the best drop-in replacement for AK4421ET?
No drop-in replacement for the AK4421ET was established by the available manufacturer and cross-reference information. A valid replacement must use the same package, preserve pin-to-pin connectivity, and remain within the required limits for supply voltage, supported sampling rate, digital interface, clocking, output level, and analog performance. The AK4421AET is a family candidate for evaluation, but its mechanical and electrical equivalence should not be assumed before review of its datasheet.
Can AK4421AET replace AK4421ET on an existing PCB?
AK4421AET cannot be confirmed as a direct PCB replacement for the AK4421ET from the available technical information. The exact package, pinout, digital interface, clock requirements, output-buffer implementation, and supply conditions must match for a drop-in change. Compare both datasheets and verify land-pattern dimensions, exposed-pad geometry, decoupling, master-clock limits, and analog output loading before approving the substitution.
When should I choose AK4421ET instead of a generic stereo DAC?
Choose the AK4421ET when a design specifically benefits from 24-bit resolution, operation up to 192 kHz, a 102 dB dynamic-range specification, and an integrated ground-referenced 2 Vrms output buffer. It is particularly useful when reducing the number of external analog functions matters. If the design instead requires a different digital interface, output voltage, package, automotive qualification, or system latency, select a converter whose documented electrical characteristics align more closely with those requirements.
Is the AK4421ET suitable for professional audio and musical instruments?
The AK4421ET is suitable for professional audio and musical-instrument signal conversion because it offers stereo 24-bit operation, sampling rates up to 192 kHz, and a 102 dB dynamic-range specification. Its integrated 2 Vrms buffer can simplify the analog path feeding an amplifier or mixer. A professional design should still verify interface timing, output filtering, noise performance under the selected gain structure, and ground isolation between digital and analog sections.
How should power and grounding be handled for AK4421ET?
Power and grounding for the AK4421ET should preserve the separation of analog and digital return currents and keep the 3.3 V supply quiet at the device. Follow the manufacturer’s recommended decoupling values and placement, connect analog and digital ground through the documented arrangement, and route the stereo outputs away from switching nodes. The internal charge pump supports ground-referenced output, but it does not remove the need for clean board-level supply and return design.
What design checks are required before using AK4421ET in a new board?
Before using the AK4421ET in a new board, verify package dimensions, exposed-pad requirements, supported digital format, system-clock limits, supply sequencing, decoupling, output-load limits, and analog-filter recommendations against the manufacturer datasheet. The 192 kHz sampling rate and 24-bit resolution are headline capabilities, but correct implementation also depends on clock cleanliness and layout. Check all interface timing before releasing the PCB.
Where can I buy AK4421ET and what is its current lead time?
Use the Request a Quote form on this page to request current AK4421ET pricing, stock confirmation, minimum order quantity, and lead time for the tape-and-reel ordering option. Commercial terms can change with market conditions and package availability, so confirm them for the exact manufacturer part number and shipping destination. The product page is also the appropriate route for requesting traceability and delivery information.

Technische Referenzdaten für AK4421ET – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the AK4421ET when the design requires a stereo 24-bit DAC that operates at up to 192 kHz and provides a ground-referenced 2 Vrms output from a 3.3 V supply. Its integrated output buffer is especially useful when minimizing external analog stages and simplifying balanced-output implementation. The device is appropriate for high-resolution audio players, professional interfaces, headphone-amplifier inputs, and digital consoles. Select a different DAC when the system requires another digital interface, a different output amplitude, a package that cannot be changed, automotive qualification, or specifications outside the AK4421ET operating envelope. A similar family designation should be treated only as a review candidate until package, pinout, clocking, interface, and analog-output requirements have been matched against the manufacturer datasheet.

Vergleich mit Alternativen

Parameter Dieses Produkt
Brand Asahi Kasei Microdevices
Converter Type Stereo DAC
Supply Voltage 3.3 V
Resolution 24 bit
Maximum Sampling Rate 192 kHz
Dynamic Range 102 dB
Full-Scale Output 2 Vrms
Output Buffer Integrated

Wichtigste Unterscheidungsmerkmale

  • High-resolution stereo conversion with an integrated output stage (vs. Generic unbuffered 24-bit DAC)
  • Ground-referenced output through charge-pump-assisted buffering (vs. Generic single-ended DAC requiring an external rail)
  • Multi-bit delta-sigma architecture optimized for low-level audio signals (vs. Generic DAC with unspecified low-level noise behavior)

Designhinweise

Route the AK4421ET analog outputs as short traces directly toward the output-filter and destination circuitry. Keep switching-regulator paths, digital clock lines, and high-current return paths away from these traces. Use the manufacturer’s application circuit as the reference for the analog output network and ground arrangement, because trace geometry can affect channel separation and distortion even when nominal component values are unchanged.

Decouple the 3.3 V supply at the AK4421ET with the capacitance and placement specified by the manufacturer. Treat the internal charge pump as part of the analog-output design: its generated negative rail must remain internal to the device, while PCB leakage and contamination near sensitive output nodes should be minimized. Verify startup behavior, supply tolerances, and any sequence requirements against the electrical-characteristics section.

Design the digital interface for the selected 192 kHz operating mode with clean clocking and valid signal timing. Check master-clock requirements, interface format, channel alignment, and supported mode combinations before routing the audio bus. When digital signals originate near switching circuitry or long cables, use controlled-impedance routing and isolation as appropriate so edge-related noise does not degrade the DAC’s 102 dB dynamic-range capability.

Do not assume that a converter with a similar family name is a drop-in replacement. A valid substitution must match the land pattern, pin names, supply voltage, clocking, digital interface, output level, and load requirements. Also avoid treating the integrated output buffer as an unrestricted power amplifier: confirm output swing, distortion, stability, and loading limits in the manufacturer electrical characteristics before adding long loads or external gain stages.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The manufacturer product information describes a mass-produced integrated circuit in tape-and-reel packaging but does not state the requested environmental, halogen-free, or conflict-minerals compliance details.

Ähnliche Suchanfragen

AK4421ET datasheet AK4421ET pinout AK4421ET datasheet pdf AK4421ET 2Vrms output AK4421ET 192kHz 24-bit DAC AK4421ET application circuit AK4421ET equivalent AK4421ET replacement AK4421ET cross reference AK4421ET vs AK4421AET AK4421ET price AK4421ET stock Asahi Kasei Microdevices AK4421ET what is AK4421ET used for

Verwandte Bauteile & Begriffe

Asahi Kasei Microdevices AK4421ET AK4421AET digital-to-analog converter DAC stereo DAC audio DAC mixed-signal IC ADC/DAC multi-bit delta-sigma modulator 24-bit conversion 192 kHz sampling rate 102 dB dynamic range 2 Vrms output integrated output buffer charge pump internal negative supply rail ground-referenced output high-resolution audio professional audio interface headphone amplifier digital mixing console home-theater audio tape and reel
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen