AK4421ET 24-Bit 192kHz Stereo DAC with 2Vrms Output | AKM
料号: AK4421ET ✓ 量产中AK4421ET 概述
A digital-to-analog converter, or DAC, is a mixed-signal semiconductor that converts digital audio samples into an analog voltage waveform. Audio DACs belong to the broader ADC/DAC and signal-conversion IC hierarchy, where they sit between a digital audio source and an analog output stage. The AK4421ET combines digital interpolation and conversion functions with a buffered analog output to produce ground-referenced stereo audio signals.
The AK4421ET supports 192 kHz operation and 24-bit resolution for high-resolution audio paths. Its integrated output buffer delivers a 2 Vrms output into the supported load, reducing the need for a separate line-output amplifier in many designs. A charge pump in the output buffer creates an internal negative supply rail, enabling ground-referenced operation. This architecture simplifies balanced or differential signal generation while preserving a full-scale output centered on ground.
The precision multi-bit delta-sigma modulator suppresses quantization noise at low signal levels and supports consistent conversion performance across the signal range. The resulting 102 dB dynamic range is relevant to audio systems requiring high signal-to-noise performance. By combining the converter, digital filtering, output buffer, and charge pump in one device, the AK4421ET can reduce external component count and simplify analog routing in compact audio equipment.
Typical applications include high-resolution audio players, digital mixing consoles, headphone amplifier input stages, professional audio interfaces, home-theater equipment, and musical-instrument signal chains. It is also suitable for test and measurement systems that require a low-noise stereo analog source with a standard digital audio interface. The 192 kHz capability is particularly useful for high-resolution source material and oversampled signal paths.
The main design consideration is analog-output implementation. The output buffer and charge pump require careful decoupling, short analog traces, and clean grounding to preserve dynamic-range performance. The board should also provide stable 3.3 V digital and analog supplies while keeping switching-converter noise away from the DAC output. Confirm supported digital interfaces, clocking requirements, and load limitations against the manufacturer datasheet before finalizing the schematic.
直接替换替代料: AK4421ET ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
该产品暂无直接替换替代料。
请求替代料AK4421ET 最大额定值与电气特性
| Product Type | 24-bit stereo digital-to-analog converter |
| 电源电压 | 3.3 V |
| Bit Resolution | 24 bit |
| Maximum Sampling Rate | 192 kHz |
| Number of Channels | 2 channels |
| 输出配置 | Stereo |
| Full-Scale Output | 2 Vrms |
| Dynamic Range | 102 dB |
| Converter Architecture | Multi-bit delta-sigma modulator |
| Output Buffer | Integrated 2 Vrms output buffer |
| Internal Rail | Charge-pump-generated negative supply rail |
| Output Reference | Ground referenced |
AK4421ET standard 引脚配置指南
AK4421ET(standard 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: AK4421ET.
请参阅 数据手册 以查看完整引脚配置。
典型应用
AK4421ET 适用于 6 应用s: High-Resolution Audio Player, Professional Audio Interface, Headphone Amplifier Input Stage, Digital Mixing Console, Home-Theater Audio Equipment, Musical Instrument and Recording Equipment.
High-Resolution Audio Player
The AK4421ET fits a high-resolution audio player that accepts 24-bit digital audio and supports sampling rates up to 192 kHz. Its multi-bit delta-sigma modulator provides a 102 dB dynamic-range specification, while the integrated 2 Vrms output buffer produces a ground-referenced stereo analog signal. The buffer charge pump supplies the internal negative rail needed by the output stage. This reduces the number of separate analog functions required between the digital decoder and a line-level amplifier, although output filtering and grounding must follow the manufacturer’s reference circuit.
Professional Audio Interface
In a professional audio interface, the AK4421ET can convert two digital channels into balanced or differential analog outputs at up to 192 kHz sampling rate. Its 102 dB dynamic range and 24-bit conversion capability support high-resolution capture and monitoring paths, while the integrated 2 Vrms buffer simplifies output-drive design. The analog section should use short traces, a carefully chosen low-pass filter, and a ground arrangement that prevents converter and interface-control return currents from disturbing the output signal.
Headphone Amplifier Input Stage
The AK4421ET is suitable as the digital-to-analog stage ahead of a headphone amplifier because its integrated 2 Vrms buffer can drive the amplifier input without a separate line-output buffer. The 24-bit, 192 kHz capability preserves high-resolution source data, and the charge-pump-assisted output architecture supports ground-referenced stereo signaling. Design the input coupling and gain structure carefully, maintain short analog traces, and confirm the supported output load before omitting any additional driver stage.
Digital Mixing Console
A digital mixing console can use the AK4421ET for stereo monitor or line-output conversion where a 24-bit data path and sampling rates up to 192 kHz are useful. The multi-bit delta-sigma architecture targets improved linearity and dynamic-range consistency, while the integrated output buffer helps preserve a compact analog signal path. Console layouts should isolate the DAC output from switching power stages, use star-ground or otherwise documented grounding practices, and provide filtering selected for the required audio bandwidth.
Home-Theater Audio Equipment
The AK4421ET can support high-resolution stereo outputs in home-theater receivers, music streamers, and powered speakers when the digital source provides 24-bit audio at up to 192 kHz. Its ground-referenced 2 Vrms outputs simplify connection to line-input stages, and the 102 dB dynamic-range specification is useful for low-level passages and quiet mastering tracks. A practical implementation should include the manufacturer-recommended output filter, clean analog grounding, and isolation from display, power-supply, and amplifier switching noise.
Musical Instrument and Recording Equipment
The AK4421ET can serve as a stereo digital output for electronic instruments, recording accessories, and signal-processing equipment requiring 24-bit conversion and a maximum sampling rate of 192 kHz. Its integrated 2 Vrms buffer offers a straightforward interface to line-level circuitry while reducing external analog stages. For recording-quality results, validate clock jitter and interface timing, use a differential output arrangement where appropriate, and keep the analog return path separate from high-current output and switching circuitry.
工程参考数据: AK4421ET ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Brand | Asahi Kasei Microdevices |
| Converter Type | Stereo DAC |
| Supply Voltage | 3.3 V |
| Resolution | 24 bit |
| Maximum Sampling Rate | 192 kHz |
| Dynamic Range | 102 dB |
| Full-Scale Output | 2 Vrms |
| Output Buffer | Integrated |
关键差异点
- High-resolution stereo conversion with an integrated output stage (对比 Generic unbuffered 24-bit DAC)
- Ground-referenced output through charge-pump-assisted buffering (对比 Generic single-ended DAC requiring an external rail)
- Multi-bit delta-sigma architecture optimized for low-level audio signals (对比 Generic DAC with unspecified low-level noise behavior)
设计说明
Route the AK4421ET analog outputs as short traces directly toward the output-filter and destination circuitry. Keep switching-regulator paths, digital clock lines, and high-current return paths away from these traces. Use the manufacturer’s application circuit as the reference for the analog output network and ground arrangement, because trace geometry can affect channel separation and distortion even when nominal component values are unchanged.
Decouple the 3.3 V supply at the AK4421ET with the capacitance and placement specified by the manufacturer. Treat the internal charge pump as part of the analog-output design: its generated negative rail must remain internal to the device, while PCB leakage and contamination near sensitive output nodes should be minimized. Verify startup behavior, supply tolerances, and any sequence requirements against the electrical-characteristics section.
Design the digital interface for the selected 192 kHz operating mode with clean clocking and valid signal timing. Check master-clock requirements, interface format, channel alignment, and supported mode combinations before routing the audio bus. When digital signals originate near switching circuitry or long cables, use controlled-impedance routing and isolation as appropriate so edge-related noise does not degrade the DAC’s 102 dB dynamic-range capability.
Do not assume that a converter with a similar family name is a drop-in replacement. A valid substitution must match the land pattern, pin names, supply voltage, clocking, digital interface, output level, and load requirements. Also avoid treating the integrated output buffer as an unrestricted power amplifier: confirm output swing, distortion, stability, and loading limits in the manufacturer electrical characteristics before adding long loads or external gain stages.
合规信息
The manufacturer product information describes a mass-produced integrated circuit in tape-and-reel packaging but does not state the requested environmental, halogen-free, or conflict-minerals compliance details.