Microchip Technology

AT90CAN128-ESAZ - 128KB AVR CAN Microcontroller | Microchip

Teilenummer: AT90CAN128-ESAZ ✓ Aktiv
64-QFN Package 128 KB ISP flash Memory
MOQ: 1 |

AT90CAN128-ESAZ Übersicht

The Microchip Technology AT90CAN128-ESAZ is an 8-bit AVR RISC microcontroller with 128 KB of ISP flash memory, 4 KB EEPROM, 4 KB SRAM, and 53 general-purpose I/O lines in a 64-QFN package. It integrates a CAN 2.0A/2.0B controller, two USARTs, a byte-oriented Two-wire Serial Interface, four flexible timer/counters with PWM support, and a real-time counter for embedded control applications.

An 8-bit microcontroller is a programmable semiconductor that executes firmware from embedded flash memory while using I/O pins to interface with sensors, actuators, communication transceivers, and human-machine interfaces. The AT90CAN128 belongs to the AVR enhanced RISC family and combines single-cycle instruction execution with integrated CAN networking. Its architecture is intended to provide efficient deterministic control for industrial, transportation, communications, and embedded automation systems.

Principal features include 128 KB of in-system-programmable flash with read-while-write operation, 4 KB of EEPROM for nonvolatile configuration data, and 4 KB of SRAM for working memory. The device provides 53 general-purpose I/O lines and 32 general-purpose working registers. Two USARTs, one Two-wire Serial Interface, four timer/counters, PWM channels, and a CAN controller reduce the need for external peripheral devices in connected embedded systems.

The enhanced AVR RISC architecture executes powerful instructions within a single clock cycle, allowing the AT90CAN128 family to approach 1 MIPS of throughput per megahertz under appropriate operating conditions. In-System Programming supports programming and configuration through the device interface. The CAN block supports both CAN 2.0A and CAN 2.0B frame formats, while the real-time counter provides a dedicated timing resource independent of the main timer/counter workload.

Typical applications include industrial CAN gateways, vehicle and transportation modules, building-automation controllers, remote monitoring equipment, CAN-connected sensors, motor-control systems, and industrial data-acquisition equipment. The integrated communication peripherals allow a compact design to connect a microcontroller node to a CAN physical-layer transceiver while retaining substantial local processing capability.

Designers should match the external CAN transceiver to the bus voltage and termination requirements, isolate transceiver supply as appropriate, and account for the package's exposed thermal-pad layout during PCB assembly. Firmware development should also validate clock startup, interrupt priorities, watchdog behavior, and CAN error handling before deployment in a safety-relevant or high-availability network.

This page combines the AT90CAN128-ESAZ memory, communication, interface, and package characteristics with drop-in alternatives, application guidance, and practical hardware-design considerations. It supports faster engineering evaluation by separating the MCU's onboard resources from the external transceiver, clock, memory, and power-supply requirements of a complete CAN node.

Drop-in-Alternativen für AT90CAN128-ESAZ – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit AT90CAN128-ESAZ (gleiche Bauform und Footprint) – abweichend in CAN Controller, Package, Real-Time Counter.

Microchip Technology
CAN Controller: CAN 2.0A / 2.0B compliant
Package: 64-pin QFN (9 mm x 9 mm)
Real-Time Counter: Yes, with separate oscillator
Vergleichen mit AT90CAN128-ESAZ →

AT90CAN128-16AZ

✅ Drop-In
📦 64-QFN
Same 128 KB flash and 64-QFN footprint; clock and temperature suffix must be checked against the ESAZ ordering code

📋 Referenzalternative (nicht im Katalog)

AT90CAN128-16AU

✅ Drop-In
Microchip Technology
📦 64-QFN
8-bit AVR RISC microcontroller with CAN controller · 16 MHz · 128 KB (128K x 8) · 4 KB · 4 KB · 53 lines · 32 registers · CAN 2.0A and CAN 2.0B compliant

Preis auf Anfrage

Datenblatt ansehen →

AT90CAN128-16MU

✅ Drop-In
Microchip Technology
📦 64-QFN
AVR 8-bit RISC · 128 KB (128K x 8) · 4 KB · 4 KB · 16 MHz · 4.5 V to 5.5 V · 53 · 32

Preis auf Anfrage

Datenblatt ansehen →

AT90CAN128-ESAZ Grenzwerte & elektrische Eigenschaften

Product Type 8-bit AVR RISC microcontroller
Flash Memory 128 KB ISP flash
EEPROM 4 KB
SRAM 4 KB
General-Purpose I/O Lines 53 lines
General-Purpose Working Registers 32 registers
CAN Controller CAN 2.0A and CAN 2.0B compliant
USART Count 2 serial ports
Two-wire Serial Interface 1 byte-oriented TWI interface
Timer/Counters 4 timer/counters with compare modes and PWM
Real-Time Counter 1 real-time counter
Gehäuse 64-QFN
Montageart Surface mount
In-System Programming Supported
Read-While-Write Supported for ISP flash

AT90CAN128-ESAZ 64-qfn Pinbelegungsleitfaden

Pinbelegung für AT90CAN128-ESAZ (64-qfn-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.

Pinbelegungsdiagramm für AT90CAN128-ESAZ im 64-qfn-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für AT90CAN128-ESAZ.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

AT90CAN128-ESAZ ist geeignet für 6 Anwendungs: Industrial CAN Gateway, Vehicle CAN Control Module, Building Automation Controller, Remote Environmental Monitoring, Motor Control and PWM Module, Industrial Data Acquisition Unit.

🏭

Industrial CAN Gateway

The AT90CAN128-ESAZ fits an industrial CAN gateway because it combines a compliant CAN 2.0A/2.0B controller with 128 KB of ISP flash and 53 I/O lines. The MCU can process local telemetry, enforce protocol conversion, and manage digital inputs while communicating through an external CAN transceiver. Its 4 KB SRAM supports message buffering and gateway state, while 4 KB EEPROM retains configuration such as node addresses and filter parameters. Designers should isolate the transceiver from logic where required and implement watchdog, bus-off recovery, and fault-state behavior in firmware.

🚗

Vehicle CAN Control Module

The AT90CAN128-ESAZ is suited to vehicle electronics requiring embedded logic, CAN communication, and multiple peripheral interfaces. Its CAN controller can exchange diagnostic and control frames, while two USARTs and the TWI interface support sensors, actuators, and service equipment. The 128 KB flash provides room for protocol stacks and application logic, and four timer/counters support timing or PWM tasks. Automotive deployment requires confirmation of the exact temperature range, qualification status, transceiver selection, transient protection, and failure-mode requirements for the vehicle platform.

🏭

Building Automation Controller

The AT90CAN128-ESAZ can serve as a building-automation controller that coordinates sensors, actuators, and network gateways over CAN. Its 53 I/O lines provide direct digital interfaces, while the real-time counter and flexible timers support periodic measurement and control functions. Two USARTs can connect display or service modules, and TWI can accommodate sensors requiring a short two-wire bus. The 128 KB flash is sufficient for structured application code, while EEPROM preserves calibration values and device settings. Power-supply design should account for long idle periods, supervised startup, and the load presented by attached CAN transceivers.

🧩

Remote Environmental Monitoring

The AT90CAN128-ESAZ is useful in remote environmental-monitoring nodes that combine local sensing with shared CAN connectivity. The integrated controller supports efficient polling, event reporting, and diagnostic frames, while the 53 I/O lines can operate digital sensors, status indicators, and local alarms. Four timer/counters allow periodic sampling and PWM generation, and the real-time counter supports timekeeping functions. The 4 KB EEPROM can retain calibration coefficients and counters across resets. For battery-powered installations, use the MCU's low-power operating modes selectively, account for transceiver sleep current, and validate the regulator's efficiency across the complete battery-voltage range.

⚡

Motor Control and PWM Module

The AT90CAN128-ESAZ can coordinate a CAN-connected motor-control module because it combines four timer/counters with compare modes, PWM support, and a real-time counter. The MCU can generate control signals, process position or current feedback, and report operating states over CAN. Its 128 KB flash allows room for motion-control logic and diagnostics, while 53 I/O lines simplify interfacing with gates, sensors, and protection circuits. The MCU does not replace a dedicated gate driver or power stage, so those external components must be selected for the motor voltage, current, isolation, and switching requirements.

🔧

Industrial Data Acquisition Unit

The AT90CAN128-ESAZ fits a data-acquisition unit that gathers digital measurements and forwards processed results over a CAN network. Its 53 I/O lines support sensors, switches, counters, and front-panel signals, while two USARTs accept external instruments or service connections. The 4 KB SRAM can hold acquisition buffers, and 128 KB flash supports drivers, calibration, and communications software. The two USARTs and TWI allow serial devices to be managed concurrently, while timers support uniform sampling intervals. Firmware should include watchdog recovery, input debouncing, sensor diagnostics, and data-integrity checks before acquisition results are used for control decisions.

What is the AT90CAN128-ESAZ?
The AT90CAN128-ESAZ is a Microchip Technology 8-bit AVR RISC microcontroller with 128 KB of ISP flash, 4 KB EEPROM, 4 KB SRAM, 53 I/O lines, and an integrated CAN 2.0A/2.0B controller. According to the Microchip AT90CAN32/64/128 manufacturer datasheet, the device also includes two USARTs, one byte-oriented TWI interface, four timer/counters, PWM capability, and a real-time counter. It is intended for compact embedded nodes that require local control and CAN networking.
What are the key specifications of AT90CAN128-ESAZ that engineers should know?
The AT90CAN128-ESAZ combines 128 KB of ISP flash, 4 KB EEPROM, 4 KB SRAM, 53 general-purpose I/O lines, and 32 working registers in one 64-QFN microcontroller. According to the Microchip manufacturer datasheet, its peripherals include a CAN 2.0A/2.0B controller, two USARTs, a byte-oriented TWI interface, four timer/counters with compare and PWM modes, and a real-time counter. These resources support deterministic embedded control alongside industrial CAN communications.
Where can I download the AT90CAN128-ESAZ datasheet PDF?
The AT90CAN128-ESAZ datasheet PDF is available from the Microchip Technology product-document link on this page and covers the AT90CAN32, AT90CAN64, and AT90CAN128 family. According to the manufacturer document titled 7679S, it contains the memory organization, peripheral descriptions, electrical characteristics, package information, and programming guidance. Use the pin-description and electrical-characteristic tables when assigning board signals and selecting passive components.
Where can I find the AT90CAN128 pinout?
The AT90CAN128 pinout is found in the pin-description and package-drawing sections of the Microchip manufacturer datasheet. The AT90CAN128-ESAZ uses a 64-QFN package, so verify every land pattern, exposed-pad connection, and power pin against the exact ordering information before routing the PCB. The package-diagram link associated with this product uses the 64-QFN drawing, while the complete pin-name table remains the authoritative assignment reference.
How much memory does the AT90CAN128-ESAZ have?
The AT90CAN128-ESAZ provides 128 KB of In-System Programmable flash, 4 KB EEPROM, and 4 KB SRAM. According to the Microchip manufacturer datasheet, the flash supports read-while-write operation, while the EEPROM provides nonvolatile storage for retained configuration and calibration values. The SRAM supplies working memory for the AVR core, stack, CAN handling, communications routines, and application variables.
What communications peripherals are integrated into AT90CAN128-ESAZ?
The AT90CAN128-ESAZ integrates a CAN 2.0A/2.0B controller, two USARTs, and one byte-oriented Two-wire Serial Interface. According to the Microchip manufacturer datasheet, the device also provides four flexible timer/counters with compare modes and PWM plus a real-time counter. These interfaces allow the MCU to connect with CAN physical-layer transceivers, sensors, displays, and other serial peripherals while reducing external component count.
Can AT90CAN128-ESAZ be used for industrial CAN networks?
The AT90CAN128-ESAZ is suitable for industrial CAN nodes that need an integrated 2.0A/2.0B controller, substantial flash, and multiple serial interfaces. According to the Microchip manufacturer datasheet, the MCU provides 128 KB of ISP flash and 53 I/O lines for local logic and peripheral control. The device still requires a suitable CAN transceiver, appropriate bus protection, and a correctly designed clock and power network before it can connect to a physical CAN bus.
What is the best drop-in replacement for AT90CAN128-ESAZ?
The closest same-family drop-in choices are the AT90CAN128-16AZ, AT90CAN128-16AU, and AT90CAN128-16MU variants where their package, clock, temperature, and pin assignments match the installed design. According to the Microchip ordering information, the suffix controls critical attributes such as clock speed, temperature grade, and package. Confirm the complete suffix rather than treating every AT90CAN128 member as interchangeable.
What can replace the AT90CAN128-ESAZ on an existing PCB?
A replacement for the AT90CAN128-ESAZ must preserve the 64-QFN footprint, pin functions, clock rating, and required temperature range. The AT90CAN128-16AZ, AT90CAN128-16AU, and AT90CAN128-16MU are documented same-family candidates, but their suffix-dependent characteristics must be checked against the original assembly. According to the Microchip manufacturer documentation, the AT90CAN128 family shares a common core while package and ordering options vary.
Is AT90CAN128-ESAZ the same as AT90CAN128-16AU?
No. The AT90CAN128-ESAZ and AT90CAN128-16AU use the same AT90CAN128 device family, but the ordering suffix identifies different combinations of clock, package, and temperature characteristics. According to the Microchip ordering information, suffix changes can alter qualification and operating limits even when the core, memory, and CAN peripherals remain related. Compare the full ordering table before treating either part as a substitute.
When should I choose AT90CAN128-ESAZ over another AT90CAN128 variant?
Choose the AT90CAN128-ESAZ when its exact clock, temperature grade, 64-QFN footprint, and qualification requirements match the target system. The AT90CAN128 family provides the same headline integration of 128 KB flash, 4 KB EEPROM, 4 KB SRAM, CAN, two USARTs, TWI, timers, PWM, and a real-time counter. According to the Microchip ordering information, selecting among family members should be based on the suffix-specific electrical and mechanical requirements.
Is AT90CAN128-ESAZ suitable for vehicle and transportation control modules?
The AT90CAN128-ESAZ can suit transportation modules that require CAN communications, extensive embedded memory, and deterministic timer resources, subject to its exact temperature and qualification ratings. According to the Microchip manufacturer datasheet, the MCU combines a 2.0A/2.0B CAN controller with four timer/counters and 53 I/O lines. Confirm the suffix-specific temperature range and automotive qualification before using it in a vehicle or other safety-related environment.
Where can I buy AT90CAN128-ESAZ online and what is its price?
Use the Request a Quote form on this page to request AT90CAN128-ESAZ availability, current pricing, and lead time from XAIPART. The exact order quantity and supply conditions can change, so the form provides the appropriate channel for a current quotation. The part's 128 KB flash, 4 KB EEPROM, 4 KB SRAM, integrated CAN controller, and 64-QFN package identify the requested device.
What is the lead time and stock status for AT90CAN128-ESAZ?
Request the current lead time, minimum order quantity, and stock status for AT90CAN128-ESAZ through the Request a Quote form on this page. According to the Microchip product documentation, the device is an 8-bit AVR microcontroller with 128 KB ISP flash and an integrated CAN controller, but production availability and delivery schedules require a current quotation. Include the required quantity and target date in the request.
How do I program an AT90CAN128-ESAZ?
The AT90CAN128-ESAZ supports In-System Programming, allowing firmware to be written and updated through its programming interface without removing it from the circuit. According to the Microchip manufacturer datasheet, the device includes 128 KB of ISP flash with read-while-write capability. Use the programming section of the datasheet to confirm clock settings, interface voltage, fuse behavior, boot configuration, and the required programming tool sequence.

Technische Referenzdaten für AT90CAN128-ESAZ – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the AT90CAN128-ESAZ when a compact 8-bit node needs 128 KB of ISP flash, 4 KB EEPROM, 4 KB SRAM, 53 I/O lines, and an integrated CAN 2.0A/2.0B controller in a 64-QFN package. The two USARTs, TWI interface, four timer/counters, PWM functions, and real-time counter make it suitable for industrial gateways, monitoring nodes, building controls, and transportation modules. Select the AT90CAN128-16AZ, AT90CAN128-16AU, or AT90CAN128-16MU instead only after confirming the clock, temperature, qualification, and ordering attributes against the installed design. These family members share the AT90CAN128 core and resource set, so their primary engineering distinction is the suffix configuration. A different AVR or CAN-capable MCU may be preferable when it offers a smaller package, lower cost, a different architecture, or an interface set better aligned with the product, but such a change can require PCB and firmware modifications rather than serving as a drop-in replacement.

Vergleich mit Alternativen

Parameter Dieses Produkt AT90CAN128-16AZ AT90CAN128-16AU AT90CAN128-16MU
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 64-QFN 64-QFN 64-QFN 64-QFN
Architecture 8-bit AVR enhanced RISC 8-bit AVR enhanced RISC 8-bit AVR enhanced RISC 8-bit AVR enhanced RISC
ISP Flash Memory 128 KB 128 KB 128 KB 128 KB
EEPROM 4 KB 4 KB 4 KB 4 KB
SRAM 4 KB 4 KB 4 KB 4 KB
General-Purpose I/O 53 lines 53 lines 53 lines 53 lines
CAN Controller CAN 2.0A/2.0B compliant CAN 2.0A/2.0B compliant CAN 2.0A/2.0B compliant CAN 2.0A/2.0B compliant
Serial Interfaces 2 USART and 1 byte-oriented TWI 2 USART and 1 byte-oriented TWI 2 USART and 1 byte-oriented TWI 2 USART and 1 byte-oriented TWI
Timer/Counters 4 with compare modes and PWM 4 with compare modes and PWM 4 with compare modes and PWM 4 with compare modes and PWM
Real-Time Counter 1 1 1 1
Exact Ordering Attributes ESAZ suffix 16AZ suffix 16AU suffix 16MU suffix

Wichtigste Unterscheidungsmerkmale

  • Integrated network and general-purpose control resources (vs. AT90CAN128-16MU)
  • Substantial embedded program and configuration memory (vs. AT90CAN128-16AZ)
  • Multiple serial interfaces reduce external peripheral count (vs. AT90CAN128-16AU)

Designhinweise

Route the AT90CAN128-ESAZ power, decoupling, ground, and exposed-pad lands exactly as specified in the Microchip package drawing and board-layout guidance. Place high-frequency decoupling capacitors close to the associated supply pins, connect the exposed thermal pad to the intended copper plane, and maintain uninterrupted return paths beneath the device. Use the package pin-description table to assign the 64-QFN pads and verify the pin-one orientation before fabrication.

The MCU CAN controller requires an external physical-layer transceiver; CAN TXD and RXD are not direct differential-bus pins. Keep the digital connection between the AT90CAN128-ESAZ and transceiver short, route it away from switching nodes and high-current paths, and provide the bus with the termination and protection required by the network. Verify signal levels and timing against both the MCU datasheet and the selected transceiver documentation.

Budget the regulator for the MCU, external transceiver, pull resistors, and attached peripherals rather than the AT90CAN128-ESAZ alone. Check the minimum operating voltage at the highest bus traffic rate and worst-case transceiver load, and account for voltage drop across supply traces. Use local decoupling to isolate CAN-transceiver switching current from the MCU supply and confirm that power-up and brownout behavior satisfy the node's restart requirements.

Do not assume that all AT90CAN128 order codes are interchangeable. The family shares a core and major peripheral set, but the suffix can change clock rating, temperature grade, package configuration, or qualification. Before substitution, compare the complete ordering table, clock characteristics, electrical limits, package drawing, and pin descriptions. Firmware should also include CAN bus-off recovery and watchdog behavior so a communication or firmware fault does not leave the node indefinitely unavailable.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

Compliance declarations for the exact AT90CAN128-ESAZ ordering code were not identified in the manufacturer or distributor material. Confirm current environmental and qualification documentation with Microchip Technology before production release.

Ähnliche Suchanfragen

at90can128 datasheet at90can128 pinout at90can128 16au datasheet at90can128 programming at90can128 development board at90can128 pdf AT90CAN128-ESAZ datasheet AT90CAN128-ESAZ pinout AT90CAN128-ESAZ programming AT90CAN128-ESAZ equivalent AT90CAN128-ESAZ replacement AT90CAN128-ESAZ price AT90CAN128-ESAZ 64-QFN AT90CAN128-ESAZ CAN 2.0B

Verwandte Bauteile & Begriffe

Microchip Technology AT90CAN128-ESAZ AT90CAN128 AT90CAN128-16AZ AT90CAN128-16AU AT90CAN128-16MU AVR enhanced RISC architecture 8-bit microcontroller embedded microcontroller CAN 2.0A CAN 2.0B CAN controller In-System Programming ISP flash memory EEPROM SRAM USART Two-wire Serial Interface timer/counter PWM real-time counter 64-QFN QFN family surface-mount package industrial CAN gateway
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen