Microchip Technology

ATSAMG55J19B-MU - 120MHz Cortex-M4 MCU | Microchip

Teilenummer: ATSAMG55J19B-MU ✓ Aktiv
1.62 V to 3.6 V Vdss 64-QFN Package 120 MHz Speed 512 KB (512K x 8) Memory
MOQ: 1 |

ATSAMG55J19B-MU Übersicht

The Microchip Technology ATSAMG55J19B-MU is a 32-bit Arm Cortex-M4 microcontroller with a floating-point unit, operating at up to 120 MHz and containing 512 KB of flash memory. It is offered in a 64-QFN package measuring 7.5 x 7.5 mm and operates across a 1.62 V to 3.6 V supply range. These characteristics place it in the SAM G55 family of high-performance, low-power embedded processors for industrial control, communications, sensing, and connected equipment.

A microcontroller is a semiconductor containing a processor core, program memory, data memory, peripherals, and communication interfaces on one integrated circuit. The ATSAMG55J19B-MU belongs to the hierarchy of 32-bit microcontroller, Arm Cortex-M4 processor, embedded processor, and semiconductor. Its Cortex-M4F architecture supports efficient floating-point calculations, helping designers reduce instruction counts and active processing time in control, monitoring, and signal-processing workloads.

Three headline features distinguish this device. Its 120 MHz operating frequency provides high compute throughput for responsive embedded control. Its 512 KB flash memory provides substantial space for firmware, application code, configuration data, and update routines. The 64-QFN package occupies a compact 7.5 x 7.5 mm footprint while supporting a broad pin count for integrated peripherals and external connections. The stated 1.62 V to 3.6 V operating voltage also supports battery-backed and low-voltage industrial designs.

The processor combines a 32-bit Arm Cortex-M4 core with an FPU, making it appropriate for applications involving sensor conversion, motor algorithms, communications, and real-time control. Microchip describes the FPU as improving throughput while helping reduce active-power consumption and time to sleep. Designers should treat available peripheral functions, memory organization, clock behavior, and package pin assignments as authoritative requirements from the manufacturer datasheet before finalizing firmware or PCB connections.

Typical uses include industrial sensor nodes, motor and motion controllers, building automation equipment, connected meters, communications modules, and low-power embedded gateways. The ATSAMG55J19B-MU is particularly suitable when firmware needs both local real-time processing and moderate onboard program storage without moving those functions into a separate processor.

A critical design step is preserving signal and power integrity in the dense 64-QFN layout. Follow the manufacturer’s recommended decoupling, exposed-pad thermal, and high-speed layout guidance. Confirm the exact pin assignments and exposed-pad connection in the manufacturer datasheet before fabrication, and verify that the selected PCB footprint matches the 7.5 x 7.5 mm package.

This page combines the exact ATSAMG55J19B-MU ordering information, electrical and packaging characteristics, verified drop-in replacement analysis, application guidance, and PCB-focused design notes to support faster component selection and hardware bring-up.

Drop-in-Alternativen für ATSAMG55J19B-MU – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit ATSAMG55J19B-MU (gleiche Bauform und Footprint) – abweichend in Package, Operating Temperature, Audio Interface, Core Architecture, Core Processor.

Microchip Technology
Package: 64-pin QFN (7.5x7.5 mm)
Operating Temperature: -40C to +85C (Industrial)
Audio Interface: I2S / TDM (up to 2 instances)
Vergleichen mit ATSAMG55J19B-MU →
Microchip Technology
Package: 64-pin QFN (7.5 x 7.5 mm)
Operating Temperature: -40C to +85C (Industrial)
Core Architecture: 32-bit RISC with DSP extensions
Vergleichen mit ATSAMG55J19B-MU →
Microchip Technology
Package: 64-QFN MRLB, 7.5 x 7.5 mm with exposed pad
Operating Temperature: -40 C to +85 C (Industrial, MUT suffix)
Audio Interface: I2S / SSC (Synchronous Serial Controller)
Vergleichen mit ATSAMG55J19B-MU →

ATSAMG55J19A-MU

✅ Drop-In
Microchip Technology
📦 64-QFN (7.5x7.5 mm)
ARM Cortex-M4F (with FPU) · 32-Bit · 120 MHz · 512 KB Flash · Up to 176 KB SRAM · 3.0 V to 3.6 V · -40C to +85C (Industrial) · 64-pin QFN (7.5x7.5 mm)

Preis auf Anfrage

Datenblatt ansehen →

ATSAMG55J19B-MU Grenzwerte & elektrische Eigenschaften

Product Type 32-bit ARM Cortex-M4 microcontroller
Processor Core Arm Cortex-M4 with FPU
Architecture ARMv7-M
Maximum CPU Frequency 120 MHz
Flash Memory 512 KB (512K x 8)
Betriebsversorgungsspannung 1.62 V to 3.6 V
CPU Word Size 32 bit
Floating-Point Unit Yes
Package Type 64-QFN
Package Dimensions 7.5 mm x 7.5 mm
Montageart Surface mount
Product Series SAM G55
RoHS-Status Compliant

ATSAMG55J19B-MU 7.5 mm x 7.5 mm Pinbelegungsleitfaden

Pinbelegung für ATSAMG55J19B-MU (7.5 mm x 7.5 mm-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.

Pinbelegungsdiagramm für ATSAMG55J19B-MU im 7.5 mm x 7.5 mm-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für ATSAMG55J19B-MU.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

ATSAMG55J19B-MU ist geeignet für 6 Anwendungs: Industrial Sensor and Condition Monitoring, Motor Control and Motion Systems, Building Automation and HVAC Control, Connected Metering and IoT Gateway, Communications and Protocol Gateway, Portable and Battery-Powered Equipment.

🏭

Industrial Sensor and Condition Monitoring

The ATSAMG55J19B-MU fits industrial condition-monitoring nodes that must process sensor information and manage communications within a compact 64-QFN footprint. Its Arm Cortex-M4F core operates up to 120 MHz, while the FPU accelerates numerical operations commonly found in filtering, calibration, and signal analysis. The 512 KB flash provides room for application firmware, device drivers, logging routines, and configuration data. At a 1.62 V to 3.6 V operating range, the device also accommodates low-voltage industrial sensing architectures. Designers should verify the required analog interfaces, timers, communication peripherals, and environmental limits against the manufacturer datasheet before choosing the exact device variant.

🔧

Motor Control and Motion Systems

The ATSAMG55J19B-MU is suitable for compact motor-control and motion-control subsystems requiring deterministic computation without a separate processor. Its 120 MHz Cortex-M4F core can execute control loops, position logic, and communications while the floating-point unit supports filtering and transformation calculations. The 512 KB flash allows substantial firmware for motion algorithms, fault handling, and parameter storage. The 64-QFN, 7.5 x 7.5 mm package helps limit board area, although careful pin planning is needed for timing signals, position feedback, communications, and power. Confirm PWM, capture, timer, and comparator resources in the manufacturer datasheet and verify the motor-drive power stage separately.

🏭

Building Automation and HVAC Control

The ATSAMG55J19B-MU supports building automation, HVAC, and environmental-control modules that coordinate sensors, actuators, and network interfaces. Its 120 MHz Cortex-M4F processing capability allows the controller to execute control laws and protocol handling concurrently, while 512 KB flash provides adequate space for configuration, schedules, and application firmware. The device’s 1.62 V to 3.6 V operating range can fit low-energy centralized or distributed control nodes. The compact 64-QFN package also supports space-constrained equipment panels. Before schematic capture, verify the required timers, serial interfaces, analog channels, watchdog behavior, and operating-temperature requirements for the target HVAC installation.

🧩

Connected Metering and IoT Gateway

The ATSAMG55J19B-MU is well matched to connected metering and IoT gateway designs that combine local measurement, protocol handling, and remote communications. The 120 MHz Cortex-M4F core provides processing headroom for packet work and real-time acquisition, while the floating-point unit supports calibration and conversion routines. Its 512 KB flash can hold networking stacks, device drivers, firmware update logic, and local configuration. A 7.5 x 7.5 mm 64-QFN package helps reduce board size in distributed meter hardware. The design must still allocate regulators, radio or network interfacing, decoupling, and protection, while validating serial-interface resources and low-power requirements in the manufacturer documentation.

🌐

Communications and Protocol Gateway

The ATSAMG55J19B-MU can serve as the host processor in a communications or protocol gateway when deterministic packet processing and peripheral integration are priorities. Its 120 MHz Arm Cortex-M4F architecture executes control and framing tasks efficiently, and the 512 KB flash provides room for multiple protocol stacks, routing tables, diagnostics, and configuration. The MCU’s compact 64-QFN package is useful in small gateways where board area and power are constrained. Its 1.62 V to 3.6 V supply range also permits integration with efficient 3.3 V power systems. Confirm the availability, electrical characteristics, and multiplexing of required UART, SPI, USB, or other communication interfaces in the manufacturer datasheet.

📱

Portable and Battery-Powered Equipment

The ATSAMG55J19B-MU supports portable and battery-powered equipment that requires substantial local processing in a compact package. Its Cortex-M4F processor operates up to 120 MHz and includes an FPU, allowing numerical work to be completed with fewer instructions than a software-heavy approach. Microchip describes this capability as supporting higher throughput, lower active-power consumption, and faster sleep transitions. The device’s 1.62 V minimum operating voltage fits low-voltage power architectures, while 512 KB flash stores compact applications and update logic. Actual battery life depends on firmware, peripherals, sleep modes, and the system power tree, so validate the complete duty cycle and verify low-power specifications for the selected device and package.

What are the key specifications of ATSAMG55J19B-MU that engineers should know?
The ATSAMG55J19B-MU is a 32-bit Arm Cortex-M4 microcontroller with an FPU, up to 120 MHz operating frequency, 512 KB flash memory, a 1.62 V to 3.6 V supply range, and a 64-QFN package measuring 7.5 x 7.5 mm. According to the Microchip product page, the Cortex-M4F processor improves throughput and can reduce active-power consumption and time to sleep. These parameters make the device suitable for responsive industrial control, connected sensing, communications, and embedded gateway designs.
Where can I download the ATSAMG55J19B-MU datasheet PDF?
The ATSAMG55J19B-MU technical documentation is available through the official Microchip product page for the ATSAMG55J19B. Open the page’s documentation section and select the manufacturer datasheet or related product documents. The 64-QFN package is identified as 7.5 x 7.5 mm, and the device is listed as an Arm Cortex-M4 microcontroller with an FPU, 120 MHz maximum frequency, and 512 KB flash memory. Use the manufacturer document for authoritative pin, clock, memory, and electrical details.
Where can I find the ATSAMG55J19B-MU pinout and package information?
The ATSAMG55J19B-MU pinout is documented in the manufacturer datasheet for the ATSAMG55J19B, because the MU ordering code identifies the offered 64-QFN package. The package measures 7.5 x 7.5 mm and uses surface-mount construction. Use the pin-description table and package drawing when assigning tracks, connecting the exposed pad, and checking power pins. The exact pin numbers and exposed-pad requirements should be taken directly from the relevant package variant in the manufacturer documentation.
What is the operating voltage of ATSAMG55J19B-MU?
The ATSAMG55J19B-MU operates from 1.62 V to 3.6 V according to its product listing. This range supports low-voltage embedded systems and allows design teams to plan power rails, regulators, battery transitions, and signal levels around a 3.3 V supply. Confirm individual analog, digital, and I/O voltage limits in the manufacturer datasheet because the overall operating-voltage range does not by itself define every pin-specific constraint. Decoupling and power-sequencing values should also follow the datasheet reference circuit.
What is the processing capability of ATSAMG55J19B-MU?
The ATSAMG55J19B-MU combines a 32-bit Arm Cortex-M4 processor with a floating-point unit and a maximum operating frequency of 120 MHz. Microchip states that the FPU improves maximum throughput and helps reduce active-power consumption and time to sleep. This makes the MCU useful for real-time control, sensor processing, communications, and algorithms that benefit from hardware-assisted floating-point execution without requiring a separate processor.
How much flash memory does ATSAMG55J19B-MU contain?
The ATSAMG55J19B-MU contains 512 KB of flash memory, organized as 512K x 8. This capacity provides room for application firmware, control logic, calibration data, communications protocols, and field-update routines in a single microcontroller. The manufacturer product page and product listings identify the same Cortex-M4F configuration and 512 KB flash figure. Confirm SRAM size, boot configuration, and memory-map details in the manufacturer datasheet before allocating code and data space.
Is ATSAMG55J19B-MU suitable for industrial control and sensor applications?
The ATSAMG55J19B-MU is suitable for many industrial control and sensor-node designs because it combines a 120 MHz Arm Cortex-M4F processor, 512 KB flash, and a compact 64-QFN package. Its 1.62 V to 3.6 V operating range also fits low-voltage embedded power architectures. Actual suitability depends on required peripherals, environmental qualification, timing, analog channels, and isolation requirements. Use the manufacturer datasheet to confirm those details and validate the complete operating-temperature envelope for the target installation.
What can replace ATSAMG55J19B-MU?
The ATSAMG55J19A-MU is the closest documented drop-in candidate for the ATSAMG55J19B-MU because it belongs to the same SAM G55 family and retains the Arm Cortex-M4F architecture. The stated CPU frequency remains 120 MHz and flash memory remains 512 KB, while both use the 64-QFN 7.5 x 7.5 mm package format. Firmware compatibility still depends on revision-specific peripherals, errata, startup configuration, and device revision requirements, so review Microchip documentation before substitution.
Is ATSAMG55J19A-MU the same as ATSAMG55J19B-MU?
The ATSAMG55J19A-MU and ATSAMG55J19B-MU are closely related SAM G55 devices rather than identical order codes. Both are based on the Arm Cortex-M4 with FPU, and documented listings retain the 120 MHz CPU rating and 512 KB flash configuration. The A-versus-B revision code is the principal visible distinction, so check Microchip revision notes and errata for changes affecting firmware, peripherals, qualification, or production. Pin assignment and exposed-pad treatment should also be checked against the manufacturer package documentation.
ATSAMG55J19A-MU vs ATSAMG55J19B-MU: which is the better drop-in replacement?
The ATSAMG55J19B-MU is preferable when the original specification explicitly calls for revision B, because the revision identifier should remain unchanged where device behavior or qualification matters. The ATSAMG55J19A-MU is the relevant same-family drop-in candidate when a lower-revision device is explicitly qualified by Microchip for the application. Both retain the 120 MHz Cortex-M4F rating, 512 KB flash, and 64-QFN package, but revision-specific errata and peripheral differences still require engineering review.
When should I choose ATSAMG55J19B-MU over ATSAMG55J19A-MU?
Choose the ATSAMG55J19B-MU when the bill of materials, qualification plan, or firmware validation is tied specifically to revision B. Choose the ATSAMG55J19A-MU only when Microchip documentation confirms that revision A meets the electrical, peripheral, environmental, and lifecycle requirements. Both devices are 120 MHz Cortex-M4F parts with 512 KB flash in the same 64-QFN package class, so the decision should be based on revision documentation and qualification rather than a broad assumption that all revisions are interchangeable.
Where to buy ATSAMG55J19B-MU online?
The ATSAMG55J19B-MU can be requested through the Request a Quote form on this XAIPART page. Provide the exact MPN, target quantity, delivery location, and required packaging or traceability requirements when requesting a quotation. The manufacturer identifies the device under the ATSAMG55J19B family, while authorized component listings identify the MU suffix as a 64-QFN ordering option. The quote team can confirm current availability, lot conditions, and shipment timing for the complete order.
What is the price of ATSAMG55J19B-MU?
Current pricing for the ATSAMG55J19B-MU is obtained through the Request a Quote form on this XAIPART page. Submit the exact MPN ATSAMG55J19B-MU, required quantity, and any production, traceability, or delivery requirements. A quotation provides a current commercial response and avoids relying on a stale catalog figure. The structured price information on the page should be used for live sourcing rather than a manually copied amount from an earlier listing.
What is the lead time and stock status of ATSAMG55J19B-MU?
Use the Request a Quote form on this XAIPART page to request current lead time, stock allocation, and delivery scheduling for the ATSAMG55J19B-MU. Component availability can change with order volume, lot traceability, package configuration, and manufacturing schedules, so a quotation is the appropriate way to establish a committed delivery date. Include the target date and required quantity in the request so the supply plan can be evaluated against the project schedule.
Is ATSAMG55J19B-MU RoHS compliant?
The ATSAMG55J19B-MU is identified as RoHS-compliant in its product listing. RoHS compliance concerns restrictions on specified substances in electrical and electronic equipment. It does not by itself establish automotive qualification, industrial temperature limits, or suitability for every safety-critical application. Check the manufacturer product page and current declarations for the exact package order code, and use the Request a Quote form when project-specific compliance documentation or material declarations are required.
How does the ATSAMG55J19B-MU compare with a switching-based embedded controller?
The ATSAMG55J19B-MU provides deterministic real-time execution through its 120 MHz Arm Cortex-M4F core, while a switching-based controller adds a power-conversion stage and introduces switching-related design concerns. For sensor processing, communications, and embedded control, the MCU can execute firmware directly and manage external interfaces without the extra converter topology. The trade-off is that power-management and I/O requirements must still be designed around the MCU’s 1.62 V to 3.6 V operating range and the specific peripherals selected for the system.

Technische Referenzdaten für ATSAMG55J19B-MU – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the ATSAMG55J19B-MU when the design specifies revision B, requires the SAM G55 Arm Cortex-M4F configuration at 120 MHz, or has firmware and qualification records tied to that revision. It combines 512 KB flash with a compact 64-QFN footprint and a 1.62 V to 3.6 V operating range, making it suitable for real-time control, sensing, communications, and compact embedded equipment. Consider the ATSAMG55J19A-MU only after confirming revision-specific errata, peripheral behavior, qualification, and firmware compatibility. Both listed options use the same package class, CPU frequency, and flash density, so revision documentation rather than headline performance should drive the substitution decision. Neither option eliminates the need to verify temperature range, SRAM, exposed-pad treatment, peripheral multiplexing, and supply sequencing against the manufacturer datasheet.

Vergleich mit Alternativen

Parameter Dieses Produkt ATSAMG55J19A-MU
Brand Microchip Technology Microchip Technology
Package 64-QFN (7.5 x 7.5 mm) 64-QFN (7.5 x 7.5 mm)
Processor Core Arm Cortex-M4 with FPU Arm Cortex-M4 with FPU
Maximum CPU Frequency 120 MHz 120 MHz
Flash Memory 512 KB 512 KB
CPU Word Size 32 bit 32 bit
Device Revision B A

Wichtigste Unterscheidungsmerkmale

  • Revision-specific sourcing for designs originally specified around revision B (vs. ATSAMG55J19A-MU)
  • Floating-point performance for embedded numerical workloads (vs. ATSAMG55J19A-MU)
  • Compact integration for space-constrained embedded products (vs. ATSAMG55J19A-MU)

Designhinweise

Assign the ATSAMG55J19B-MU footprint only after checking the exact 64-QFN, 7.5 x 7.5 mm package drawing, terminal lengths, and exposed-pad geometry in the manufacturer documentation. Place decoupling capacitors close to their intended power pins and route them without long loops through surrounding circuitry. The exposed pad is normally part of the thermal and electrical design rather than an optional copper feature; confirm whether it connects to ground and follow the prescribed via-array pattern before releasing the PCB.

Design the power tree around the stated 1.62 V to 3.6 V operating range. Use the manufacturer reference circuit to determine the required supply topology, startup behavior, and decoupling values. Check every peripheral’s voltage tolerance before connecting 5 V-tolerant or externally powered signals. If the board also supports battery operation, define a controlled transition between battery, regulator, and backup supplies to avoid uncontrolled back-powering or sequencing violations at the MCU pins.

The 64-QFN package can conduct heat through its exposed pad, but the required thermal performance depends on the PCB copper area, via pattern, enclosure, ambient temperature, and processing load. Use the package drawing’s exposed-pad and via recommendations rather than estimating a land pattern independently. Validate the hottest operating condition with thermocouples or thermal simulation, and avoid placing heat-generating regulators or power components directly beneath the MCU when that arrangement raises junction temperature.

Separate sensitive analog inputs, communication lines, and clock signals from noisy switching nodes on the PCB. Use a continuous ground reference where possible, keep return paths short, and avoid routing high-current or fast-switching traces beneath sensitive nets. External communication or memory interfaces should follow the manufacturer’s signal-integrity guidance for length, impedance, and grounding. Firmware should also configure unused pins and peripheral states deliberately rather than relying on a generic reset default.

Compliance-Informationen

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

RoHS compliance is identified for the exact ATSAMG55J19B-MU product listing. Additional environmental, automotive, and material-compliance attributes require current manufacturer declarations for the selected order code.

Ähnliche Suchanfragen

atsamg55j19b aut atsamg55j19b mut ATSAMG55J19B-MU datasheet ATSAMG55J19B-MU pinout ATSAMG55J19B-MU 120MHz Cortex-M4 ATSAMG55J19B-MU 512KB flash ATSAMG55J19B-MU 64-QFN ATSAMG55J19B-MU equivalent ATSAMG55J19B-MU replacement ATSAMG55J19B-MU vs ATSAMG55J19A-MU ATSAMG55J19B-MU price ATSAMG55J19B-MU stock

Verwandte Bauteile & Begriffe

Microchip Technology ATSAMG55J19B-MU ATSAMG55J19B ATSAMG55J19A-MU ATSAMG55J19B-MUT SAM G55 Arm Cortex-M4 Cortex-M4F ARMv7-M 32-bit microcontroller embedded processor semiconductor floating-point unit FPU 512 KB flash memory 120 MHz 64-QFN QFN family surface-mount technology 1.62 V to 3.6 V industrial control sensor node motor control communications gateway RoHS
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen