ATSAME53J18A-MU - 120MHz Cortex-M4F MCU 256KB Flash | Microchip
Teilenummer: ATSAME53J18A-MU ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $9.2 | $9,20 |
| 10 | $8.45 | $84,50 |
| 100 | $7.1 | $710,00 |
| 500 | $6.2 | $3.100,00 |
| 1.000 | $5.45 | $5.450,00 |
ATSAME53J18A-MU Übersicht
What is a Cortex-M4F microcontroller? A microcontroller (MCU) is a single-chip computer containing a CPU core, memory, and peripherals. The Cortex-M4F is ARM's mainstream 32-bit core with DSP instructions and a single-precision Floating Point Unit, sitting above Cortex-M0/M3 and below Cortex-M7 in performance. SAM E53 microcontrollers target industrial IoT, connected appliances, and human-machine interface (HMI) applications where deterministic real-time control and connectivity coexist.
Key differentiating features include 256 KB dual-panel Flash with ECC for high-reliability firmware, 128 KB SRAM with ECC, a 12-bit 1 MSPS ADC with up to 24 channels, two 12-bit DAC channels, and a full-speed USB 2.0 interface. The 64-QFN package exposes the full peripheral set, including 64 GPIO, multiple SERCOM instances, and a 10/100 Ethernet MAC that is unusual at this price tier.
Technically, the ATSAME53J18A-MU is built on a low-power CMOS process and supports a coreMark score of 273, with sub-microsecond interrupt latency. The integrated FPU accelerates signal-processing and sensor-fusion workloads, while the Ethernet MAC enables deterministic TCP/IP networking on the same die. Hardware crypto accelerators and a True Random Number Generator (TRNG) further distinguish the part.
Typical applications include industrial control and HMI panels, IoT gateways with Ethernet connectivity, USB peripherals and consumer audio devices, building automation controllers, and sensor hubs with DSP preprocessing. The wide peripheral mix makes it well-suited to multi-protocol bridging applications.
Design consideration: When laying out the 64-QFN, expose the central thermal pad with at least 16 thermal vias to the inner ground plane; the Ethernet MAC requires a 25 MHz external crystal with the trace routed within 5 mm of the XIN/XOUT pins to meet IEEE 802.3 jitter masks.
This page synthesizes distributor pricing, drop-in alternatives drawn from the same SAM E5x family, and practical design notes not duplicated in the Microchip datasheet.
Drop-in-Alternativen für ATSAME53J18A-MU – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit ATSAME53J18A-MU (gleiche Bauform und Footprint) – abweichend in ADC, Operating Temperature, Package, SRAM, SERCOM.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
ATSAME53J19A-MU
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
ATSAME51J19A-MUT-EFP
✅ Drop-In✓ Auf Lager
$2.43 / Stück
Datenblatt ansehen →ATSAME51J18A-MFT
✅ Drop-In✓ Auf Lager
$4.15 / Stück
ATSAME53J18A-MFT
✅ Drop-In✓ Auf Lager
$7.45 / Stück
Datenblatt ansehen →ATSAMD51J19A-MU
✅ Drop-In✓ Auf Lager
$6.1 / Stück
Datenblatt ansehen →ATSAMD51J18A-MU
✅ Drop-In✓ Auf Lager
$3.42 / Stück
Datenblatt ansehen →ATSAME53J18A-MU Grenzwerte & elektrische Eigenschaften
| Core | ARM Cortex-M4F (32-bit, single-core) |
| Maximum CPU Speed | 120 MHz |
| FPU | Yes (single-precision IEEE 754) |
| Flash Memory | 256 KB (256K x 8) dual-panel with ECC |
| SRAM | 128 KB with ECC |
| Supply Voltage (VDD) | 1.62 V to 3.6 V |
| Betriebstemperatur | -40C to +85C (Industrial) |
| Gehäuse | 64-QFN (9x9 mm) with exposed pad |
| GPIO Count | 51 |
| ADC | 12-bit, 1 MSPS, up to 24 channels |
| DAC | 12-bit, 2 channels |
| Ethernet | 10/100 MAC (requires external PHY) |
| USB | USB 2.0 Full-Speed device/host |
| SERCOM | Up to 6 (UART/SPI/I2C configurable) |
| I2S | Yes (audio interface) |
| Timers | Multiple 16/24-bit timers, RTC, TCC |
| MSL-Level | 3 (per JEDEC J-STD-020) |
| RoHS-Status | Compliant |
ATSAME53J18A-MU 64-qfn (9x9 mm) with exposed pad Pinbelegungsleitfaden
Pinbelegung für ATSAME53J18A-MU (64-qfn (9x9 mm) with exposed pad-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für ATSAME53J18A-MU.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
ATSAME53J18A-MU ist geeignet für 6 Anwendungs: Industrial HMI Touch Panel, IoT Ethernet Gateway, USB Audio Device, Building Automation Controller, Sensor Hub with DSP Preprocessing, Connected Consumer Appliance.
Industrial HMI Touch Panel
The ATSAME53J18A-MU drives industrial HMI panels by combining the 120 MHz Cortex-M4F core for responsive touch processing, 256 KB ECC Flash for safe firmware storage, and the 12-bit ADC for analog sensor integration. The FPU accelerates gesture recognition math, while 51 GPIO supports up to a 7-inch TFT with capacitive touch. The wide 1.62-3.6 V supply range tolerates industrial 24V rail drops after buck regulation, and the -40C to +85C range covers factory floor deployment without derating.
Empfohlen
IoT Ethernet Gateway
The ATSAME53J18A-MU fits IoT Ethernet gateways by providing the integrated 10/100 MAC that eliminates the need for an external controller, only an external PHY such as the KSZ8081 is required. The 120 MHz Cortex-M4F runs lwIP TCP/IP stacks comfortably, and the six SERCOM instances handle UART sensor inputs concurrently. ECC-protected Flash and SRAM satisfy IEC 61508 SIL-2 capable firmware integrity requirements common in building-automation gateways.
Empfohlen
USB Audio Device
The ATSAME53J18A-MU implements USB audio class devices using the integrated USB 2.0 Full-Speed controller and the I2S peripheral for direct DAC interfacing. The 12-bit DAC enables headphone monitoring, while the Cortex-M4F DSP extensions handle software codecs such as SBC and AAC. With 128 KB ECC SRAM, sample buffers up to 16 ms at 48 kHz stereo can be held without dropouts, suiting USB headsets and conferencing peripherals.
Empfohlen
Building Automation Controller
The ATSAME53J18A-MU serves in building automation controllers where it aggregates Modbus, BACnet, and KNX fieldbus traffic through its six SERCOM channels. The Ethernet MAC enables direct connection to building management systems without a bridge chip, and the hardware crypto accelerator secures TLS 1.2 communications with cloud dashboards. ECC on Flash and SRAM prevents bit-flip faults in long-lifecycle HVAC installations.
Empfohlen
Sensor Hub with DSP Preprocessing
The ATSAME53J18A-MU acts as a sensor hub by fusing IMU, environmental, and proximity sensor data using the Cortex-M4F DSP extensions and FPU, executing Kalman filters and FFT transforms without CPU stalls. The 12-bit 1 MSPS ADC digitizes up to 24 analog channels, while six SERCOM connect I2C/SPI sensors. ECC SRAM keeps filter state tables free of single-bit corruption in vibration-prone deployments.
Empfohlen
Connected Consumer Appliance
The ATSAME53J18A-MU powers connected appliances such as smart ovens and washing machines, providing a 120 MHz Cortex-M4F for control loops, USB for firmware updates, and Ethernet for cloud telemetry. The integrated 12-bit DAC drives proportional valves, and 51 GPIO interface to HMI keypads and segment displays. Industrial-grade -40C to +85C operation tolerates appliance thermal environments without thermal derating of core peripherals.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für ATSAME53J18A-MU – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | ATSAME53J19A-MU | ATSAME51J19A-MU | ATSAME51J18A-MF | ATSAMD51J19A-MU |
|---|---|---|---|---|---|
| Package | 64-QFN (9x9 mm) | 64-QFN (9x9 mm) - same | 64-QFN (9x9 mm) - same | 64-QFN (9x9 mm) - same | 64-QFN (9x9 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core | ARM Cortex-M4F | ARM Cortex-M4F | ARM Cortex-M4F | ARM Cortex-M4F | ARM Cortex-M4F |
| Maximum Clock | 120 MHz | 120 MHz | 120 MHz | 120 MHz | 120 MHz |
| Flash Memory | 256 KB | 512 KB | 512 KB | 256 KB | 512 KB |
| SRAM | 128 KB | 128 KB | 128 KB | 128 KB | 192 KB |
| Ethernet MAC | Yes (10/100) | Yes (10/100) | No | No | No |
| USB | USB 2.0 Full-Speed | USB 2.0 Full-Speed | USB 2.0 Full-Speed | USB 2.0 Full-Speed | USB 2.0 Full-Speed |
Wichtigste Unterscheidungsmerkmale
- Integrated 10/100 Ethernet MAC absent on most Cortex-M4F peers (vs. ATSAMD51J19A-MU)
- ECC protection on both Flash and SRAM (vs. STM32F407VGT6)
- Higher analog precision with 12-bit 1 MSPS ADC (vs. ATSAME51J18A-MF)
Designhinweise
Estimated: at maximum 120 MHz operation with all peripherals active, the ATSAME53J18A-MU draws approximately 90 mA from VDD. The 64-QFN 9x9 package has a theta_JA of about 28 C/W on a 4-layer JEDEC test board, so total dissipation should stay below 1.5 W to keep junction below 125 C at 85 C ambient. Ensure the exposed pad is soldered to a ground plane with at least 16 thermal vias for adequate heat spreading.
Place the 12 MHz external crystal or resonator within 5 mm of the XIN/XOUT pins and route the traces over a continuous ground plane to avoid coupling noise into the PLL. The Ethernet MAC requires a separate 25 MHz crystal within 5 mm of its dedicated pins, with the ground reference isolated from the main 12 MHz oscillator ground by a moat bridged at one point. Decoupling requires one 100 nF X7R per VDD pin plus a single 4.7 uF bulk capacitor near the package.
Do not attempt to use the E53 Ethernet MAC without first initializing the GCLK generators correctly - omitting GCLK0 from the system clock chain is the most common cause of dead Ethernet links on first prototypes. The dual-panel Flash requires that BOOTPROT be configured before locking the security bit, otherwise firmware updates will fail. When migrating from the SAMD51 to SAME53 family, recompile against the SAM E5x peripheral library because GCLK ID numbers differ from the SAMD51 even for identical peripherals.
Compliance-Informationen
RoHS compliant per Microchip product page. Industrial temperature grade (-40C to +85C). Not AEC-Q100 qualified - choose SAM E53 AEC-Q100 variants for automotive applications.
