Microchip Technology

ATSAML10E16A-AF - 32MHz Cortex-M23 MCU | Microchip

Teilenummer: ATSAML10E16A-AF ✓ Aktiv
Less than 25 uA/MHz Id 32-pin TQFP, 7 x 7 mm Package 32 MHz Speed 64 KB Memory
MOQ: 1 |

ATSAML10E16A-AF Übersicht

The Microchip Technology ATSAML10E16A-AF is a 32-bit Arm Cortex-M23 microcontroller operating at 32 MHz, with 64 KB of flash memory and 16 KB of SRAM in a 32-pin TQFP package measuring 7 x 7 mm. It is designed for low-power embedded systems requiring a compact processor, advanced analog peripherals, capacitive-touch support, and secure smart-card connectivity.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The ATSAML10E16A belongs to the SAM L10 family and combines the Arm Cortex-M23 core with embedded flash, SRAM, serial interfaces, timing resources, and low-power peripherals. Its position in the hierarchy is microcontroller, embedded processor, semiconductor, and system-on-chip component for compact control systems.

The principal features include an operating frequency of 32 MHz, 64 KB of flash, 16 KB of SRAM, and 25 I/O in the 32-pin TQFP configuration. Microchip specifies less than 25 uA/MHz in active mode and less than 100 nA in sleep mode. The device also includes an enhanced peripheral touch controller, advanced analog resources, an ISO7816 smart-card interface, and an event system for coordinating peripheral activity.

The Arm Cortex-M23 core provides a 32-bit instruction set while maintaining a compact, power-conscious architecture suited to battery-operated equipment. Hardware-enforced TrustZone security domains can separate secure and non-secure software when the complete device configuration and development environment support them. Peripheral integration reduces the need for external sensors, analog converters, and communication controllers on small embedded boards.

Typical uses include capacitive-touch user interfaces, smart-card readers, low-power sensor nodes, compact industrial controllers, and connected security accessories. The enhanced touch controller is useful when a PCB overlay, keypad, or proximity surface must be scanned without a dedicated external controller. The ISO7816 interface supports smart-card communication designs, while the advanced analog section can reduce external signal-conditioning requirements.

Board design should preserve access to programming and debug functions, route sensitive analog and touch inputs away from fast digital signals, and provide the decoupling required by the Microchip device documentation. Confirm the exact pin functions, programming workflow, and external-component requirements against the manufacturer datasheet before committing a 7 x 7 mm TQFP layout to production.

This product page consolidates the principal processor, memory, package, low-power, analog, touch, and smart-card characteristics with practical design guidance, structured comparisons, and sourcing information for engineers evaluating the ATSAML10E16A-AF for compact embedded systems.

Drop-in-Alternativen für ATSAML10E16A-AF – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit ATSAML10E16A-AF (gleiche Bauform und Footprint) – abweichend in Core Architecture, Package, ADC, Active Mode Current, RoHS Status.

Microchip Technology
Core Architecture: ARM Cortex-M23
Package: 32-pin TQFP (7x7 mm)
ADC: 12-bit
Vergleichen mit ATSAML10E16A-AF →
Microchip Technology
Core Architecture: ARM Cortex-M23 (Armv8-M Baseline)
Package: 32-TQFP (7x7 mm)
ADC: 12-bit (count per family datasheet)
Vergleichen mit ATSAML10E16A-AF →

ATSAML10E16A-MFT

✅ Drop-In
📦 32-TQFP (7x7)
Ordering attributes differ from ATSAML10E16A-AF; the listing does not quantify a performance difference

📋 Referenzalternative (nicht im Katalog)

ATSAML10E16A-AF Grenzwerte & elektrische Eigenschaften

Product Type 32-bit microcontroller
Processor Core Arm Cortex-M23
Core Architecture Armv8-M
Maximum CPU Frequency 32 MHz
Flash Memory 64 KB
SRAM 16 KB
I/O Count 25 I/O
Gehäuse 32-pin TQFP, 7 x 7 mm
Montageart Surface mount
Active Mode Current Less than 25 uA/MHz
Sleep Mode Current Less than 100 nA
Maximum Temperature 125 °C
Green Status Green
Shipping Format Tray
Touch Support Enhanced peripheral touch controller
Analog Support Advanced analog peripherals
Smart-Card Interface ISO7816 interface
Event System Event system

ATSAML10E16A-AF 32-pin tqfp, 7 x 7 mm Pinbelegungsleitfaden

Pinbelegung für ATSAML10E16A-AF (32-pin tqfp, 7 x 7 mm-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.

Pinbelegungsdiagramm für ATSAML10E16A-AF im 32-pin tqfp, 7 x 7 mm-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für ATSAML10E16A-AF.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

ATSAML10E16A-AF ist geeignet für 6 Anwendungs: Capacitive-Touch User Interfaces, Smart-Card Readers and Access Controls, Battery-Powered Sensor Nodes, Compact Industrial Controllers, Low-Power Wearable Accessories, Secure Embedded Accessories.

🧩

Capacitive-Touch User Interfaces

The ATSAML10E16A-AF fits compact touch controls because its enhanced peripheral touch controller is integrated with a 32 MHz Arm Cortex-M23 core and 25 I/O in the 32-pin TQFP package. A firmware-based controller can scan touch electrodes, apply filtering, and drive indicators without requiring a separate touch-controller IC. The 64 KB of flash and 16 KB of SRAM provide room for interface firmware, event handling, and local state. Designers should validate electrode geometry, acquisition timing, grounding, and noise immunity against the Microchip application guidance, particularly when touch traces run near switching power circuitry.

🔒

Smart-Card Readers and Access Controls

The ATSAML10E16A-AF is suitable for smart-card access equipment because the SAM L10 family includes an ISO7816 smart-card interface alongside its 32 MHz Cortex-M23 processor. Designers can use the same device for protocol handling, card-presence detection, user-interface logic, and low-power standby control. Its less-than-100-nA sleep specification supports designs that spend most of their time waiting for a card or user event. Firmware must manage the external card interface, electrical levels, timing, security state, and secure boot requirements according to the manufacturer documentation.

🔋

Battery-Powered Sensor Nodes

The ATSAML10E16A-AF supports battery-powered sensor nodes that alternate between periodic measurements and long inactive intervals. Its 32 MHz Cortex-M23 core provides enough performance for local filtering, event logic, and communication framing, while the 64 KB flash and 16 KB SRAM avoid external memory in many designs. Microchip specifies less than 25 uA/MHz in active mode and less than 100 nA in sleep mode, allowing the system designer to balance processing time against battery capacity. Select an external low-power sensor only when the integrated analog resources cannot meet the required measurement accuracy or sampling rate.

🏭

Compact Industrial Controllers

The ATSAML10E16A-AF fits compact industrial controllers that require deterministic embedded control, local I/O, and low standby consumption. Its 32-bit Cortex-M23 core runs at 32 MHz, while the 25 available I/O and advanced analog peripherals can connect sensors, actuators, status indicators, and service interfaces. The 32-pin TQFP footprint supports compact, standardized assemblies without forcing a fine-pitch package. For factory equipment, validate timing margins, input levels, isolation strategy, temperature behavior, and firmware update requirements; consumer compliance markings should not be treated as industrial qualification.

📱

Low-Power Wearable Accessories

The ATSAML10E16A-AF can serve as the control center for a small wearable accessory that uses touch input, event processing, and intermittent wireless activity. The less-than-25-uA/MHz active specification supports duty-cycled operation, and the less-than-100-nA sleep figure helps preserve battery life when the product is idle. With 64 KB of flash, 16 KB of SRAM, and integrated touch support, the MCU can consolidate several discrete functions into one device. Battery-current budgeting should include the selected radio and sensors, because their consumption may dominate the controller and determine the useful duty cycle.

🛡️

Secure Embedded Accessories

The ATSAML10E16A-AF is appropriate for connected accessories that benefit from isolated secure and non-secure software domains. The Cortex-M23 core includes hardware-enforced TrustZone capabilities, while the device's low-power operating characteristics support always-on accessory designs. Its 32-bit processing at 32 MHz can handle communication setup, local policy checks, user input, and peripheral coordination. Security still depends on enabling the correct device features, protecting keys, implementing secure boot, and following Microchip's configuration guidance. The 64 KB flash and 16 KB SRAM also require disciplined partitioning between trusted code, application code, and working buffers.

Zusammenfassung der empfohlenen Produkte

ATSAML10E16A-MFT Same-family Cortex-M23 device considered for touch-control designs Verwendet in: Capacitive-Touch User Interfaces, Smart-Card Readers and Access Controls, Battery-Powered Sensor Nodes, Compact Industrial Controllers, Low-Power Wearable Accessories, Secure Embedded Accessories ATSAML10E16A-MUT Microchip Technology Verwendet in: Capacitive-Touch User Interfaces, Smart-Card Readers and Access Controls, Battery-Powered Sensor Nodes, Compact Industrial Controllers, Low-Power Wearable Accessories, Secure Embedded Accessories
What are the key specifications of ATSAML10E16A-AF that engineers should know?
The ATSAML10E16A-AF combines a 32 MHz Arm Cortex-M23 core, 64 KB of flash memory, 16 KB of SRAM, and 25 I/O in a 32-pin 7 x 7 mm TQFP package. According to the Microchip product page, it consumes less than 25 uA/MHz in active mode and less than 100 nA in sleep mode. It also provides enhanced peripheral touch control, advanced analog peripherals, an ISO7816 smart-card interface, and an event system.
What is the processor core and maximum frequency of ATSAML10E16A-AF?
The ATSAML10E16A-AF uses a 32-bit Arm Cortex-M23 processor core and operates at up to 32 MHz. The Cortex-M23 architecture supports efficient embedded control while retaining hardware-enforced TrustZone security domains. According to the Microchip ATSAML10E16A product page, this combination targets compact, power-sensitive products that benefit from 32-bit processing without the resource demands of a larger application processor.
How much flash and SRAM does ATSAML10E16A-AF have?
The ATSAML10E16A-AF provides 64 KB of embedded flash memory and 16 KB of SRAM. The flash stores firmware and nonvolatile configuration data, while the SRAM supports stack, variables, buffers, and real-time working state. Microchip describes the device as a 32-bit, 32 MHz microcontroller with 64 KB expressed as 64K x 8 bits in its catalog specification.
What package and pin count does ATSAML10E16A-AF use?
The ATSAML10E16A-AF is packaged in a 32-pin TQFP measuring 7 x 7 mm and uses surface-mount assembly. The catalog identifies 25 I/O in this configuration, with the remaining package positions serving device and power-related functions. Use the 32-pin TQFP pin description in the Microchip datasheet when assigning tracks, programming connections, analog inputs, and touch electrodes.
Is ATSAML10E16A-AF suitable for low-power applications?
Yes. Microchip specifies less than 25 uA/MHz in active mode and less than 100 nA in sleep mode for the ATSAML10E16A family. These figures make the device appropriate for battery-operated sensors, wearables, smart accessories, and compact controllers where average power is determined by how long the MCU remains in its lowest-power state. Final battery life still depends on duty cycle, peripherals, and board leakage.
Where can I download the ATSAML10E16A-AF datasheet PDF?
The ATSAML10E16A-AF datasheet is available from the Microchip ATSAML10E16A product page and the linked manufacturer documentation. It covers the Cortex-M23 core, memory, electrical characteristics, package pinout, peripherals, programming, and recommended application circuits. Use the manufacturer PDF for design sign-off because package drawings, pin names, and electrical limits must match the exact ATSAML10E16A-AF ordering code.
Where can I find the ATSAML10E16A-AF pinout for the 32-pin TQFP?
The ATSAML10E16A-AF pinout is documented in the pin-description table of the Microchip ATSAML10E16A and SAM L10 family documentation. The target ordering code uses a 32-pin, 7 x 7 mm TQFP package with 25 I/O. Assign PCB nets from that table, including power, ground, reset, programming, debug, touch, analog, and serial-interface functions.
Where can I buy ATSAML10E16A-AF online?
Use the Request a Quote form on this page to request ATSAML10E16A-AF availability, lot traceability, and commercial terms. The request should state the required quantity, target date, and whether the 32-pin TQFP device is needed in tray packaging. The manufacturer and catalog records identify the exact ordering code, so submit that full MPN unchanged to avoid receiving a different package or temperature option.
What is the price of ATSAML10E16A-AF?
Use the Request a Quote form on this page for a current ATSAML10E16A-AF quotation based on quantity and requested delivery terms. Pricing for the exact ordering code can vary with volume, packaging, inventory, and schedule, so a static figure may not reflect a current executable offer. Include your production forecast in the request to help establish an appropriate commercial response.
What is the lead time for ATSAML10E16A-AF?
Submit ATSAML10E16A-AF through the Request a Quote form on this page and state the required quantity and target delivery date. The lead time depends on the requested quantity, available manufacturing capacity, and order configuration. For time-critical production, request a supply schedule that includes lot allocation, packaging requirements, and shipment timing in the quotation response.
Is ATSAML10E16A-AF currently in stock?
Current stock for ATSAML10E16A-AF should be confirmed through the Request a Quote form on this page. Supply status can vary by quantity and delivery date, so a brief availability response may not cover the full production requirement. Specify annual usage, initial build quantity, and required ship-to location to obtain a practical availability and lead-time commitment.
ATSAML10E16A-AF vs ATSAML10E16A-MFT - which is the better replacement choice?
ATSAML10E16A-AF is the established 32 MHz, 64 KB-flash Cortex-M23 device in a 32-pin TQFP configuration, while ATSAML10E16A-MFT is a related same-family ordering code. Their suitability depends on the exact package, temperature, packing, and qualification requirements recorded by Microchip. Compare those attributes before treating either MPN as a drop-in replacement, and verify the final pin assignments against the manufacturer datasheet.
What can replace ATSAML10E16A-AF on the same PCB footprint?
ATSAML10E16A-MFT is the closest same-family candidate identified for ATSAML10E16A-AF, but a mechanically similar package alone does not prove a drop-in replacement. Confirm that the replacement has the same 32-pin TQFP dimensions, pin numbering, exposed electrical functions, temperature rating, memory configuration, and firmware support. Software migration may still be necessary if peripheral assignments or ordering attributes differ.
When should I choose ATSAML10E16A-AF over another low-power Cortex-M23 MCU?
Choose ATSAML10E16A-AF when a design needs the combination of a 32 MHz Arm Cortex-M23 core, 64 KB of flash, 16 KB of SRAM, and a 32-pin 7 x 7 mm TQFP package. Its less-than-25-uA/MHz active specification and less-than-100-nA sleep specification also suit duty-cycled products. Select another device only when its memory, security, peripherals, package, qualification, or ecosystem better matches the product requirements.
Is ATSAML10E16A-AF suitable for capacitive-touch and smart-card products?
Yes. The ATSAML10E16A family includes an enhanced peripheral touch controller and an ISO7816 smart-card interface, while the target device also provides advanced analog peripherals and 25 I/O in its 32-pin TQFP package. These features can support touch-sensitive controls and smart-card access products. Validate electrode layout, analog settling, clocking, and protocol timing in the target system before production.

Technische Referenzdaten für ATSAML10E16A-AF – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose ATSAML10E16A-AF when the product needs a 32 MHz Arm Cortex-M23 core, 64 KB of flash, 16 KB of SRAM, 25 I/O, and a 32-pin 7 x 7 mm TQFP package in a design that emphasizes low active and sleep current. Its integrated touch controller, advanced analog peripherals, ISO7816 interface, and event system make it particularly useful for compact user-interface, smart-card, sensor-node, and wearable products. Consider ATSAML10E16A-MFT as a same-family candidate when its ordering attributes meet the production requirements, but verify package, temperature, packing, and firmware compatibility rather than relying on the family name alone. Choose a different Cortex-M23 MCU if the product requires more flash, SRAM, I/O, communication peripherals, a smaller package, or a different qualification profile. For cost-driven projects, compare the complete memory and peripheral set rather than selecting only by CPU frequency.

Vergleich mit Alternativen

Parameter Dieses Produkt ATSAML10E16A-MFT
Package 32-TQFP (7x7) 32-TQFP (7x7)
Brand Microchip Technology Microchip Technology

Wichtigste Unterscheidungsmerkmale

  • Integrated touch, analog, smart-card, and event-management resources (vs. ATSAML10E16A-MFT)
  • Low-power operation for duty-cycled embedded products (vs. ATSAML10E16A-MFT)
  • Compact memory-balanced Cortex-M23 configuration (vs. ATSAML10E16A-MFT)

Designhinweise

Estimated: the manufacturer specifies less than 25 uA/MHz in active mode and less than 100 nA in sleep mode. Calculate the controller's average current from the planned active duration, sleep duration, and operating frequency rather than using only the sleep figure. Include sensor, radio, regulator, and leakage current in the complete power budget, then confirm the selected operating point against the Microchip datasheet before setting the battery-life target.

Place the required input capacitors directly beside their associated power pins and keep the return path short. Route touch-sensing and analog signals away from switching-node and high-current traces, and use a quiet ground strategy for analog references. Because the ATSAML10E16A-AF combines sensitive analog and touch functions with digital processing in one package, component placement and return-current control can materially affect measurement repeatability and electromagnetic immunity.

Do not treat the ATSAML10E16A, ATSAML10E16A-AF, and similarly named family ordering codes as interchangeable without checking their order codes. Confirm the 32-pin TQFP dimensions, pin numbering, temperature grade, memory configuration, packing format, and product status in the Microchip documentation. A package match alone is insufficient for firmware compatibility because bootloader behavior, peripheral configuration, and device identification can vary between ordering options.

Use the manufacturer's recommended programming and debug connections and preserve access to the reset and programming interface. For analog measurements and capacitive-touch channels, follow the documented acquisition sequence and source-impedance limits. Validate settling at the intended clock speed, compare measured noise against the required signal-to-noise ratio, and keep test points and debug clocks away from sensitive touch electrodes to avoid corrupting acquisition results.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The catalog identifies the ATSAML10E16A-AF as green, but no separate RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for this exact ordering code.

Daten verifiziert am: 2026-11-20 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

atsaml10e16a aut ATSAML10E16A-AF datasheet ATSAML10E16A-AF datasheet pdf ATSAML10E16A-AF pinout ATSAML10E16A-AF specifications ATSAML10E16A-AF 32MHz Cortex-M23 ATSAML10E16A-AF 64KB flash ATSAML10E16A-AF TQFP-32 ATSAML10E16A-AF equivalent ATSAML10E16A-AF replacement ATSAML10E16A-AF vs ATSAML10E16A-MFT ATSAML10E16A-AF price ATSAML10E16A-AF stock Microchip ATSAML10E16A-AF

Verwandte Bauteile & Begriffe

Microchip Technology ATSAML10E16A-AF ATSAML10E16A ATSAML10E16A-MFT ATSAML10E16A-MUT Arm Cortex-M23 Armv8-M microcontroller embedded processor semiconductor SAM L10 32-bit microcontroller 64 KB flash memory 16 KB SRAM 32 MHz 25 I/O 32-TQFP 7 x 7 mm package surface mount TrustZone enhanced peripheral touch controller advanced analog peripherals ISO7816 smart-card interface event system
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen