Microchip Technology

ATSAMS70Q20A-CN - 300MHz Cortex-M7 MCU | Microchip

Teilenummer: ATSAMS70Q20A-CN ✓ Aktiv
1.08 V to 3.6 V Vdss 144-LFBGA (10 x 10 mm) Package 300 MHz Speed 1 MB (1M x 8) Memory
MOQ: 1 |

ATSAMS70Q20A-CN Übersicht

The Microchip Technology ATSAMS70Q20A-CN is a 32-bit ARM Cortex-M7 microcontroller operating at up to 300 MHz, with 1 MB of Flash memory and 384 KB of SRAM in a 144-LFBGA package measuring 10 x 10 mm. It operates from 1.08 V to 3.6 V and is supplied in a tray package. The controller is designed for high-performance embedded applications that require substantial local memory and an efficient 32-bit processing architecture.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripheral interfaces onto one device. The ATSAMS70Q20A-CN belongs to the SAM S70 family and combines an ARM Cortex-M7 core with 1 MB of Flash and 384 KB of SRAM. Its 300 MHz operating speed positions it for demanding control, communications, and data-processing tasks rather than simple low-cost sensing nodes.

The principal device characteristics include a 32-bit ARM Cortex-M7 processor, a maximum clock frequency of 300 MHz, 1 MB of 1M x 8 Flash memory, and 384 KB of SRAM. The operating voltage spans 1.08 V to 3.6 V. These attributes give a designer ample memory for firmware, configuration data, working state, and protocol buffers while supporting a compact 10 x 10 mm BGA footprint.

The ATSAMS70Q20A-CN is identified as an active Microchip Technology product and is listed as ROHS3 compliant. Its package is a 144-LFBGA, and the exact ordering configuration is associated with tray packaging. One distributor listing reports a minimum order quantity of one and a lead time of 21 weeks, making early sourcing and production planning important for scheduled builds.

Typical engineering roles include industrial equipment control, embedded communications, data acquisition, human-machine interfaces, and connected industrial products. The 1 MB Flash capacity is useful for firmware and boot logic, while 384 KB of SRAM supports buffering and real-time workloads. Confirm the complete peripheral, pin, electrical, and software requirements against the manufacturer documentation before releasing a PCB or production design.

For a new layout, use the 144-LFBGA land pattern and pin-assignment information from the manufacturer documentation rather than inferring connectivity from a generic BGA library. Validate power, ground, decoupling, signal integrity, exposed-pad requirements, and programming or debug access on the assembled PCB. Firmware validation should also confirm startup behavior and peripheral operation across the intended voltage and temperature conditions.

This product record combines the exact manufacturer identifiers and distributor attributes with practical sourcing, packaging, layout, and replacement guidance. It also distinguishes documented facts from parameters that must be checked in the manufacturer datasheet, helping engineers make a technically sound decision without confusing a family-level MCU with a confirmed pin-compatible substitute.

Drop-in-Alternativen für ATSAMS70Q20A-CN – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit ATSAMS70Q20A-CN (gleiche Bauform und Footprint) – abweichend in Package, SRAM, Mounting Type, Processor Core, Product Type.

Microchip Technology
Package: 144-pin LFBGA (10x10 mm)
SRAM: 384 KB (includes 128 KB TCM)
Mounting Type: Surface Mount (BGA)
Vergleichen mit ATSAMS70Q20A-CN →
Microchip Technology
Package: 144-pin LFBGA (10x10 mm)
SRAM: 384 KB multi-port (with 32 KB TCM)
Mounting Type: Surface Mount (BGA)
Vergleichen mit ATSAMS70Q20A-CN →
Microchip Technology
SRAM: 384 KB
Processor Core: ARM Cortex-M7 with Floating Point Unit
Product Type: 32-bit ARM Cortex-M7 flash microcontroller
Vergleichen mit ATSAMS70Q20A-CN →
Microchip Technology
Package: 144-pin LFBGA, 10 mm x 10 mm
SRAM: 384 KB
Product Type: 32-bit ARM Cortex-M7 flash microcontroller
Vergleichen mit ATSAMS70Q20A-CN →

ATSAMS70Q20B-CN

✅ Drop-In
📦 144-LFBGA (10 x 10 mm)
Later B-family revision with the same 1 MB Flash, 384 KB SRAM, 300 MHz Cortex-M7 core, and 144-LFBGA configuration; revision-specific errata must be reviewed

📋 Referenzalternative (nicht im Katalog)

ATSAMS70Q21A-CN

✅ Drop-In
Microchip Technology
📦 144-LFBGA (10 x 10 mm)
32-bit ARM Cortex-M7 flash microcontroller · ARM Cortex-M7 with Floating Point Unit · 300 MHz · 2048 KB (2 MB) · 2M x 8 bits · 384 KB · Up to 256 KB · 32-bit

Preis auf Anfrage

Datenblatt ansehen →

ATSAMS70Q21B-CN

✅ Drop-In
Microchip Technology
📦 144-LFBGA (10 x 10 mm)
32-bit ARM Cortex-M7 flash microcontroller · ARM Cortex-M7 · 300 MHz · 2 MB (2048 KB) · 384 KB · 32-bit · Yes, single-precision FPU · 144-pin LFBGA, 10 mm x 10 mm

Preis auf Anfrage

Datenblatt ansehen →

ATSAME70Q20A-CN

✅ Drop-In
Microchip Technology
📦 144-LFBGA
ARM Cortex-M7 with FPU · 300 MHz · 1024 KB (1 MB) · 384 KB (includes 128 KB TCM) · 1.8V / 2.5V / 3.3V · -40C to +85C (Industrial) · 144-pin LFBGA (10x10 mm)

Preis auf Anfrage

Datenblatt ansehen →

ATSAME70Q20B-CN

✅ Drop-In
Microchip Technology
📦 144-LFBGA
ARM Cortex-M7 with FPU (single + double precision) · 300 MHz · 300 DMIPS / 1500 CoreMark · 1 MB (1M x 8) · 384 KB multi-port (with 32 KB TCM) · 1.62 V to 3.6 V · 144-pin LFBGA (10x10 mm) · -40 C to +105 C (industrial)

Preis auf Anfrage

Datenblatt ansehen →

ATSAMS70Q20A-CN Grenzwerte & elektrische Eigenschaften

Product Type 32-bit ARM Cortex-M7 microcontroller
Processor Core ARM Cortex-M7
Architecture 32-bit
Maximale Taktfrequenz 300 MHz
Flash Memory 1 MB (1M x 8)
Static RAM 384 KB
Operating Voltage Range 1.08 V to 3.6 V
Gehäuse 144-LFBGA (10 x 10 mm)
Pin-Anzahl 144 pins
Montageart Surface mount
Packaging Tray
Minimum Order Quantity 1 unit
Reported Lead Time 21 weeks
Lebenszyklusstatus Active
RoHS-Status ROHS3 compliant
Product Series SAM S70

ATSAMS70Q20A-CN 144-lfbga (10 x 10 mm) Pinbelegungsleitfaden

Pinbelegung für ATSAMS70Q20A-CN (144-lfbga (10 x 10 mm)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.

Pinbelegungsdiagramm für ATSAMS70Q20A-CN im 144-lfbga (10 x 10 mm)-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für ATSAMS70Q20A-CN.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

ATSAMS70Q20A-CN ist geeignet für 6 Anwendungs: Industrial Equipment Control, Embedded Communications Gateway, Data Acquisition and Monitoring, Human-Machine Interface Controller, Connected Sensor Node, Real-Time Control Platform.

🏭

Industrial Equipment Control

The ATSAMS70Q20A-CN fits industrial equipment controllers that combine real-time control with locally stored configuration, diagnostics, and communication software. Its 300 MHz ARM Cortex-M7 core provides substantial processing headroom, while 1 MB of Flash can hold application firmware and 384 KB of SRAM supports working buffers and control state. The 1.08 V to 3.6 V operating range supports low-voltage embedded architectures. In a production design, verify the exact peripheral assignments, power domains, environmental limits, and isolated communication interfaces in the manufacturer documentation before PCB release.

🌐

Embedded Communications Gateway

The ATSAMS70Q20A-CN is suitable for communications equipment that must combine protocol handling, packet buffering, and real-time control within one compact controller. The 300 MHz Cortex-M7 core can process communication workloads concurrently with supervisory tasks, while 384 KB of SRAM provides space for transient frames and state. Its 144-LFBGA package measures 10 x 10 mm, supporting compact board layouts. Before selecting it, confirm the required serial, Ethernet, USB, or other interface availability, pin multiplexing, clocking, and protocol support in the exact device documentation.

🧩

Data Acquisition and Monitoring

The ATSAMS70Q20A-CN can serve as the central controller in a data-acquisition or monitoring product where local sampling, filtering, logging, and host communication must be coordinated. Its 384 KB of SRAM accommodates working data and transfer buffers, while 1 MB of Flash stores firmware, calibration tables, and configuration data. The 300 MHz core offers margin for signal-processing tasks beyond basic acquisition. Engineers should verify ADC characteristics, timer resources, analog input limits, trigger capability, and data-rate requirements against the manufacturer documentation before committing to the device.

📺

Human-Machine Interface Controller

The ATSAMS70Q20A-CN is appropriate for human-machine interface controllers that combine display updates, input handling, application logic, and system communications. Its 300 MHz Cortex-M7 performance supports responsive interface behavior, and 1 MB of Flash provides room for graphics support code, controls, and configuration. The 384 KB SRAM can be used for frame or touch-related working storage. A specific design must confirm whether the required LCD, touch, external memory, and display interfaces are present on the exact pin configuration and whether the 10 x 10 mm BGA can be routed with production-test access.

📱

Connected Sensor Node

The ATSAMS70Q20A-CN can be used in a connected sensor node when local processing, protocol handling, and firmware extensibility are more important than minimum component cost. Its 1 MB of Flash accommodates a richer application layer, and 384 KB of SRAM supports sampling pipelines, sensor fusion, and network buffers. The 1.08 V to 3.6 V supply range can simplify integration with low-voltage power systems. Confirm the availability of the required sensor, communication, and low-power wake-up resources, and evaluate the current consumption in the intended operating modes using the manufacturer data.

⚡

Real-Time Control Platform

The ATSAMS70Q20A-CN is a strong candidate for a compact real-time control platform requiring more computation and memory than a basic low-end microcontroller. The 300 MHz ARM Cortex-M7 core provides performance margin for coordinated motor, motion, or machine-control tasks, while 384 KB of SRAM supports multiple control loops and 1 MB of Flash stores application code. The 144-LFBGA package permits a compact controller assembly. Final selection must verify timer resolution, PWM resources, capture channels, position sensing interfaces, interrupt latency, and timing guarantees for the specific control architecture.

Zusammenfassung der empfohlenen Produkte

ATSAME70Q20A-CN Microchip Technology Verwendet in: Industrial Equipment Control, Data Acquisition and Monitoring AC320212 Microchip LCD adapter referenced with the ATSAMS70Q20 product family Verwendet in: Industrial Equipment Control, Human-Machine Interface Controller ATSAMS70Q20B-CN Same-package revision candidate for communications-controller evaluation Verwendet in: Embedded Communications Gateway, Human-Machine Interface Controller, Real-Time Control Platform ATSAME70Q20B-CN Microchip Technology Verwendet in: Embedded Communications Gateway, Connected Sensor Node ATSAMS70Q21A-CN Microchip Technology Verwendet in: Data Acquisition and Monitoring, Real-Time Control Platform ATSAMS70Q21B-CN Microchip Technology Verwendet in: Connected Sensor Node
What are the key specifications of ATSAMS70Q20A-CN that engineers should know?
The ATSAMS70Q20A-CN combines a 32-bit ARM Cortex-M7 core running at up to 300 MHz with 1 MB of Flash memory and 384 KB of SRAM. According to the Microchip product listing, it operates from 1.08 V to 3.6 V and uses a 144-LFBGA package measuring 10 x 10 mm. These figures define the device's processing, memory, power-supply, and board-space requirements. Peripheral counts, pin assignments, and detailed electrical limits should be confirmed in the manufacturer documentation for the selected ordering configuration.
Where can I download the ATSAMS70Q20A-CN datasheet and product documentation?
The ATSAMS70Q20A-CN datasheet and supporting documentation can be found through the official Microchip Technology ATSAMS70Q20 product page. The manufacturer page is the preferred source for the complete electrical characteristics, pinout, package drawing, peripheral descriptions, and errata. Use the ordering-code details when matching documentation to ATSAMS70Q20A-CN, because package, temperature, and shipping variants may share the same base family identifier but differ in how the finished device is ordered.
What is the ATSAMS70Q20A-CN pinout and package footprint?
The ATSAMS70Q20A-CN is packaged in a 144-LFBGA measuring 10 x 10 mm. Its complete pin map, including power, ground, communications, debug, and peripheral signals, must be taken from the manufacturer pin description table rather than inferred from the package dimensions. The available public product listing confirms the 144-LFBGA configuration but does not reproduce every pin name, so use the official ATSAMS70Q20 documentation when creating the PCB land pattern and assigning tracks.
How much Flash memory and SRAM does ATSAMS70Q20A-CN contain?
The ATSAMS70Q20A-CN contains 1 MB of Flash memory organized as 1M x 8 and 384 KB of SRAM. The distributor product summary identifies the same 1,024 kB Flash and 384 kB SRAM configuration, making the device suitable for firmware, data tables, communication buffers, and real-time working memory. The Flash size is the same number of bytes for both descriptions, but its interface and programming characteristics should be confirmed from the manufacturer documentation.
What is the operating voltage of ATSAMS70Q20A-CN?
The ATSAMS70Q20A-CN operates from 1.08 V to 3.6 V. This range appears in both the distributor specification summary and the product listing, making it suitable for low-voltage embedded systems with regulated core and I/O rails. The listed range does not by itself establish which voltage combinations are valid for every peripheral or I/O bank, so the power-management and DC-characteristic tables in the manufacturer datasheet should govern the board power design.
Is the ATSAMS70Q20A-CN suitable for high-performance embedded control?
The ATSAMS70Q20A-CN is suitable for many high-performance embedded-control applications because it provides a 300 MHz ARM Cortex-M7 core, 1 MB of Flash, and 384 KB of SRAM. Its processing headroom and local memory can support complex state machines, communications gateways, data-acquisition systems, and industrial control products. Suitability still depends on the required peripherals, real-time response, security implementation, package routing, and environmental limits, which should be verified before component approval.
Where can I buy ATSAMS70Q20A-CN online?
The ATSAMS70Q20A-CN can be requested through the Request a Quote form on this page, which provides a direct path for checking unit availability, packaging, lot conditions, and production lead time. A listed distributor record reports a minimum order quantity of one and a lead time of 21 weeks, while another listing identifies the device as active. Buyers should confirm the exact suffix, tray packaging, and delivery schedule when submitting a quote request.
What is the price of ATSAMS70Q20A-CN?
The current commercial price for ATSAMS70Q20A-CN is obtained through the Request a Quote form on this page. The structured pricing area accounts for quantity, currency, channel, and order conditions without embedding a potentially stale figure in technical content. Buyers should submit the required quantity, target packaging, and delivery location with the request so the supplier can confirm current commercial terms for this exact 144-LFBGA ordering code.
Is ATSAMS70Q20A-CN in stock and what is its lead time?
ATSAMS70Q20A-CN is identified as an active part, but current stock should be confirmed through the Request a Quote form on this page. One distributor listing reports a minimum order quantity of one and a lead time of 21 weeks, which is the applicable published lead-time indication for that listing. Because inventory can change by package and order quantity, use the quote form for the latest allocation rather than treating a distributor landing-page stock statement as a firm production allocation.
What is the best drop-in replacement for ATSAMS70Q20A-CN?
ATSAMS70Q20B-CN is the closest same-family candidate listed for drop-in evaluation because it retains the 1 MB Flash configuration, 384 KB SRAM, 300 MHz Cortex-M7 architecture, and 144-LFBGA format. A drop-in decision still requires verification of pin functions, electrical limits, peripheral availability, and device revision behavior in the manufacturer documentation. Use ATSAMS70Q21A-CN or ATSAMS70Q21B-CN only when the additional memory and revised peripherals meet the design requirement.
Can ATSAME70Q20A-CN replace ATSAMS70Q20A-CN?
ATSAME70Q20A-CN can be considered a 144-LFBGA alternative with a 32-bit Cortex-M7 core, 1,024 kB Flash, and 384 kB SRAM, but it belongs to the SAM E70 family rather than the SAM S70 family. Do not treat the matching memory figures as proof of a drop-in replacement. Before substitution, compare the exact BGA assignments, power domains, communication peripherals, interrupt mapping, boot behavior, and software device drivers against the ATSAMS70Q20A-CN documentation.
ATSAMS70Q20A-CN vs ATSAMS70Q21A-CN - which is better for firmware-heavy designs?
ATSAMS70Q21A-CN is preferable when its larger memory capacity is required, while ATSAMS70Q20A-CN remains the direct choice when 1 MB of Flash and 384 KB of SRAM are sufficient. Both devices appear in cross-reference listings as SAM S70 Cortex-M7 controllers in the same 300 MHz class, but the Q21 family's revised memory and peripheral configuration must be confirmed before PCB reuse. The correct decision depends on code size, working buffers, peripheral fit, and software-driver requirements.
When should I choose ATSAMS70Q20A-CN over ATSAMS70Q20B-CN?
Choose ATSAMS70Q20A-CN when the exact A revision matches the qualified BOM and software baseline; choose ATSAMS70Q20B-CN when that later family revision is documented as suitable for the same 144-LFBGA design. Both candidates retain the principal 300 MHz Cortex-M7, 1 MB Flash, and 384 KB SRAM characteristics. Before replacing an A-revision device, check errata, revision-specific fixes, peripheral behavior, and qualification requirements rather than relying only on matching headline specifications.
What can replace ATSAMS70Q20A-CN without PCB changes?
The most credible no-PCB-change candidates are same-package SAM family variants such as ATSAMS70Q20B-CN, ATSAMS70Q21A-CN, and ATSAMS70Q21B-CN, subject to complete pin and peripheral validation. Cross-brand alternatives require separate proof of a matching 144-LFBGA land pattern and equivalent pin functions, which the available comparison material does not establish. The Request a Quote form can be used to identify current sourcing options, but engineering approval should depend on the manufacturer documentation rather than the cross-reference result alone.
Is ATSAMS70Q20A-CN RoHS compliant and actively available for design-in?
ATSAMS70Q20A-CN is listed as ROHS3 compliant and with an active lifecycle status. The lifecycle listing supports continued design-in planning, while ROHS3 identifies the stated lead-free compliance class. Both conditions should be reconfirmed for the exact purchase configuration and current manufacturer declarations. If a regulated or automotive end product requires additional qualifications, conflict-minerals documentation, or a specific AEC-Q100 grade, request those documents separately.

Technische Referenzdaten für ATSAMS70Q20A-CN – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose ATSAMS70Q20A-CN for a compact, high-performance embedded design that specifically requires the SAM S70 platform, a 300 MHz Cortex-M7 core, 1 MB of Flash, 384 KB of SRAM, and a 144-LFBGA footprint. Choose ATSAMS70Q20B-CN when a later same-family revision is documented as suitable; its matching headline configuration can simplify hardware review, but revision-specific errata must still be checked. Choose a Q21-family candidate when its larger Flash memory or revised peripherals provide meaningful value, recognizing that software and functional differences may require additional verification. ATSAME70Q20A-CN and ATSAME70Q20B-CN are cross-family alternatives rather than automatic replacements: they match important memory, clock, and package attributes but may differ in pin functions, peripherals, and boot behavior. For every proposed substitution, require a complete BGA-ball comparison, electrical-limit review, firmware port, and hardware regression test.

Vergleich mit Alternativen

Parameter Dieses Produkt ATSAMS70Q20B-CN ATSAMS70Q21A-CN ATSAMS70Q21B-CN ATSAME70Q20A-CN ATSAME70Q20B-CN
Package 144-LFBGA (10 x 10 mm) 144-LFBGA (10 x 10 mm) 144-LFBGA 144-LFBGA 144-LFBGA 144-LFBGA
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Product Family SAM S70 SAM S70 SAM S70 SAM S70 SAM E70 SAM E70
Processor Core ARM Cortex-M7 ARM Cortex-M7 ARM Cortex-M7 ARM Cortex-M7 ARM Cortex-M7 ARM Cortex-M7
Maximum Clock Frequency 300 MHz 300 MHz 300 MHz 300 MHz 300 MHz 300 MHz
Flash Memory 1 MB (1M x 8) 1 MB Greater than 1 MB Greater than 1 MB 1,024 KB 1 MB
Static RAM 384 KB 384 KB 384 KB 384 KB 384 KB 384 KB
Operating Voltage Range 1.08 V to 3.6 V 1.08 V to 3.6 V 1.08 V to 3.6 V 1.08 V to 3.6 V 1.2 V to 3.3 V 1.08 V to 3.6 V
Word Length 32-bit 32-bit 32-bit 32-bit 32-bit 32-bit

Wichtigste Unterscheidungsmerkmale

  • Targeted S70 family fit for real-time embedded control (vs. ATSAME70Q20A-CN)
  • Direct same-family revision path (vs. ATSAMS70Q20B-CN)
  • Greater memory headroom for expanded firmware (vs. ATSAMS70Q20B-CN)
  • Exact documented ordering and packaging configuration (vs. ATSAMS70Q21A-CN)

Designhinweise

Base the PCB layout on the exact 144-LFBGA land pattern and ball map in the manufacturer package documentation. Preserve the prescribed ball-pad dimensions, solder-mask and paste rules, and routing clearances. Place decoupling components at the associated supply balls and provide a continuous, low-impedance ground distribution. Do not infer continuity from neighboring BGA locations because an unconnected or differently assigned ball can prevent startup, impair a peripheral, or damage the device.

Use the 1.08 V to 3.6 V operating range as the board-level constraint and verify every permitted core and I/O voltage combination in the electrical-characteristics tables. Confirm which rails can be tied together, their sequencing requirements, and the maximum ramp rate. Programmable supply rails should be validated with production-representative firmware so that debug interfaces, communications, and external peripherals do not receive out-of-sequence voltage.

Plan high-speed signals, clocks, and memory interfaces using the recommended topology and impedance rules for the selected package. Keep switching or high-current routing away from sensitive analog inputs, minimize return-path discontinuities, and provide unobstructed access for programming and debug signals. The 10 x 10 mm 144-LFBGA package has fine-pitch routing, so use the manufacturer design guidance and perform design-rule and assembly-capability checks before fabrication.

Do not treat ATSAME70Q20A-CN, ATSAME70Q20B-CN, or Q21-family devices as automatic substitutions merely because their headline core, memory, clock, and package specifications are similar. Compare every assigned BGA ball, power domain, peripheral function, interrupt vector, clock source, boot mode, and development-tool requirement. Firmware and startup code may also need revision-specific changes. Complete a hardware comparison, firmware port, regression test, and production risk review before approving any alternative.

Compliance-Informationen

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The product listing identifies ATSAMS70Q20A-CN as ROHS3 compliant. No additional REACH, halogen-free, conflict-minerals, or automotive qualification statement is established by the available information.

Daten verifiziert am: 2026-11-15 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

atsams70q20 datasheet ATSAMS70Q20A-CN datasheet ATSAMS70Q20A-CN datasheet pdf ATSAMS70Q20A-CN pinout ATSAMS70Q20A-CN footprint Microchip ATSAMS70Q20A-CN ATSAMS70Q20A-CN 300MHz Cortex-M7 ATSAMS70Q20A-CN 1MB Flash 384KB SRAM ATSAMS70Q20A-CN drop-in replacement ATSAMS70Q20A-CN vs ATSAMS70Q20B-CN ATSAMS70Q20A-CN price ATSAMS70Q20A-CN stock ATSAMS70Q20A-CN application circuit ATSAMS70Q20A-CN replacement

Verwandte Bauteile & Begriffe

Microchip Technology ATSAMS70Q20A-CN ATSAMS70Q20 ATSAMS70Q20B-CN ATSAMS70Q21A-CN ATSAMS70Q21B-CN ATSAME70Q20A-CN ATSAME70Q20B-CN ARM Cortex-M7 32-bit microcontroller SAM S70 SAM E70 embedded microcontroller semiconductor Flash memory static RAM 144-LFBGA BGA package surface-mount technology 300 MHz 1.08 V to 3.6 V ROHS3 industrial control embedded communications data acquisition
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen