ATSAMS70Q20A-CN - 300MHz Cortex-M7 MCU | Microchip
料号: ATSAMS70Q20A-CN ✓ 量产中ATSAMS70Q20A-CN 概述
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripheral interfaces onto one device. The ATSAMS70Q20A-CN belongs to the SAM S70 family and combines an ARM Cortex-M7 core with 1 MB of Flash and 384 KB of SRAM. Its 300 MHz operating speed positions it for demanding control, communications, and data-processing tasks rather than simple low-cost sensing nodes.
The principal device characteristics include a 32-bit ARM Cortex-M7 processor, a maximum clock frequency of 300 MHz, 1 MB of 1M x 8 Flash memory, and 384 KB of SRAM. The operating voltage spans 1.08 V to 3.6 V. These attributes give a designer ample memory for firmware, configuration data, working state, and protocol buffers while supporting a compact 10 x 10 mm BGA footprint.
The ATSAMS70Q20A-CN is identified as an active Microchip Technology product and is listed as ROHS3 compliant. Its package is a 144-LFBGA, and the exact ordering configuration is associated with tray packaging. One distributor listing reports a minimum order quantity of one and a lead time of 21 weeks, making early sourcing and production planning important for scheduled builds.
Typical engineering roles include industrial equipment control, embedded communications, data acquisition, human-machine interfaces, and connected industrial products. The 1 MB Flash capacity is useful for firmware and boot logic, while 384 KB of SRAM supports buffering and real-time workloads. Confirm the complete peripheral, pin, electrical, and software requirements against the manufacturer documentation before releasing a PCB or production design.
For a new layout, use the 144-LFBGA land pattern and pin-assignment information from the manufacturer documentation rather than inferring connectivity from a generic BGA library. Validate power, ground, decoupling, signal integrity, exposed-pad requirements, and programming or debug access on the assembled PCB. Firmware validation should also confirm startup behavior and peripheral operation across the intended voltage and temperature conditions.
This product record combines the exact manufacturer identifiers and distributor attributes with practical sourcing, packaging, layout, and replacement guidance. It also distinguishes documented facts from parameters that must be checked in the manufacturer datasheet, helping engineers make a technically sound decision without confusing a family-level MCU with a confirmed pin-compatible substitute.
直接替换替代料: ATSAMS70Q20A-CN ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: ATSAMS70Q20A-CN (相同外形与封装尺寸) ——差异在于 Package, SRAM, Mounting Type, Processor Core, Product Type.
ATSAMS70Q20B-CN
✅ 直接替换📋 参考替代料(不在目录中)
ATSAMS70Q21A-CN
✅ 直接替换联系询价
查看数据手册 →ATSAMS70Q21B-CN
✅ 直接替换联系询价
查看数据手册 →ATSAME70Q20A-CN
✅ 直接替换联系询价
查看数据手册 →ATSAME70Q20B-CN
✅ 直接替换联系询价
查看数据手册 →ATSAMS70Q20A-CN 最大额定值与电气特性
| Product Type | 32-bit ARM Cortex-M7 microcontroller |
| Processor Core | ARM Cortex-M7 |
| Architecture | 32-bit |
| 最大时钟频率 | 300 MHz |
| Flash Memory | 1 MB (1M x 8) |
| Static RAM | 384 KB |
| Operating Voltage Range | 1.08 V to 3.6 V |
| 封装 | 144-LFBGA (10 x 10 mm) |
| 引脚数量 | 144 pins |
| 安装类型 | Surface mount |
| Packaging | Tray |
| Minimum Order Quantity | 1 unit |
| Reported Lead Time | 21 weeks |
| 生命周期状态 | Active |
| RoHS 状态 | ROHS3 compliant |
| Product Series | SAM S70 |
ATSAMS70Q20A-CN 144-lfbga (10 x 10 mm) 引脚配置指南
ATSAMS70Q20A-CN(144-lfbga (10 x 10 mm) 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: ATSAMS70Q20A-CN.
请参阅 数据手册 以查看完整引脚配置。
典型应用
ATSAMS70Q20A-CN 适用于 6 应用s: Industrial Equipment Control, Embedded Communications Gateway, Data Acquisition and Monitoring, Human-Machine Interface Controller, Connected Sensor Node, Real-Time Control Platform.
Industrial Equipment Control
The ATSAMS70Q20A-CN fits industrial equipment controllers that combine real-time control with locally stored configuration, diagnostics, and communication software. Its 300 MHz ARM Cortex-M7 core provides substantial processing headroom, while 1 MB of Flash can hold application firmware and 384 KB of SRAM supports working buffers and control state. The 1.08 V to 3.6 V operating range supports low-voltage embedded architectures. In a production design, verify the exact peripheral assignments, power domains, environmental limits, and isolated communication interfaces in the manufacturer documentation before PCB release.
推荐
Embedded Communications Gateway
The ATSAMS70Q20A-CN is suitable for communications equipment that must combine protocol handling, packet buffering, and real-time control within one compact controller. The 300 MHz Cortex-M7 core can process communication workloads concurrently with supervisory tasks, while 384 KB of SRAM provides space for transient frames and state. Its 144-LFBGA package measures 10 x 10 mm, supporting compact board layouts. Before selecting it, confirm the required serial, Ethernet, USB, or other interface availability, pin multiplexing, clocking, and protocol support in the exact device documentation.
推荐
Data Acquisition and Monitoring
The ATSAMS70Q20A-CN can serve as the central controller in a data-acquisition or monitoring product where local sampling, filtering, logging, and host communication must be coordinated. Its 384 KB of SRAM accommodates working data and transfer buffers, while 1 MB of Flash stores firmware, calibration tables, and configuration data. The 300 MHz core offers margin for signal-processing tasks beyond basic acquisition. Engineers should verify ADC characteristics, timer resources, analog input limits, trigger capability, and data-rate requirements against the manufacturer documentation before committing to the device.
推荐
Human-Machine Interface Controller
The ATSAMS70Q20A-CN is appropriate for human-machine interface controllers that combine display updates, input handling, application logic, and system communications. Its 300 MHz Cortex-M7 performance supports responsive interface behavior, and 1 MB of Flash provides room for graphics support code, controls, and configuration. The 384 KB SRAM can be used for frame or touch-related working storage. A specific design must confirm whether the required LCD, touch, external memory, and display interfaces are present on the exact pin configuration and whether the 10 x 10 mm BGA can be routed with production-test access.
推荐
Connected Sensor Node
The ATSAMS70Q20A-CN can be used in a connected sensor node when local processing, protocol handling, and firmware extensibility are more important than minimum component cost. Its 1 MB of Flash accommodates a richer application layer, and 384 KB of SRAM supports sampling pipelines, sensor fusion, and network buffers. The 1.08 V to 3.6 V supply range can simplify integration with low-voltage power systems. Confirm the availability of the required sensor, communication, and low-power wake-up resources, and evaluate the current consumption in the intended operating modes using the manufacturer data.
推荐
Real-Time Control Platform
The ATSAMS70Q20A-CN is a strong candidate for a compact real-time control platform requiring more computation and memory than a basic low-end microcontroller. The 300 MHz ARM Cortex-M7 core provides performance margin for coordinated motor, motion, or machine-control tasks, while 384 KB of SRAM supports multiple control loops and 1 MB of Flash stores application code. The 144-LFBGA package permits a compact controller assembly. Final selection must verify timer resolution, PWM resources, capture channels, position sensing interfaces, interrupt latency, and timing guarantees for the specific control architecture.
推荐
推荐产品汇总
工程参考数据: ATSAMS70Q20A-CN ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | ATSAMS70Q20B-CN | ATSAMS70Q21A-CN | ATSAMS70Q21B-CN | ATSAME70Q20A-CN | ATSAME70Q20B-CN |
|---|---|---|---|---|---|---|
| Package | 144-LFBGA (10 x 10 mm) | 144-LFBGA (10 x 10 mm) | 144-LFBGA | 144-LFBGA | 144-LFBGA | 144-LFBGA |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Product Family | SAM S70 | SAM S70 | SAM S70 | SAM S70 | SAM E70 | SAM E70 |
| Processor Core | ARM Cortex-M7 | ARM Cortex-M7 | ARM Cortex-M7 | ARM Cortex-M7 | ARM Cortex-M7 | ARM Cortex-M7 |
| Maximum Clock Frequency | 300 MHz | 300 MHz | 300 MHz | 300 MHz | 300 MHz | 300 MHz |
| Flash Memory | 1 MB (1M x 8) | 1 MB | Greater than 1 MB | Greater than 1 MB | 1,024 KB | 1 MB |
| Static RAM | 384 KB | 384 KB | 384 KB | 384 KB | 384 KB | 384 KB |
| Operating Voltage Range | 1.08 V to 3.6 V | 1.08 V to 3.6 V | 1.08 V to 3.6 V | 1.08 V to 3.6 V | 1.2 V to 3.3 V | 1.08 V to 3.6 V |
| Word Length | 32-bit | 32-bit | 32-bit | 32-bit | 32-bit | 32-bit |
关键差异点
- Targeted S70 family fit for real-time embedded control (对比 ATSAME70Q20A-CN)
- Direct same-family revision path (对比 ATSAMS70Q20B-CN)
- Greater memory headroom for expanded firmware (对比 ATSAMS70Q20B-CN)
- Exact documented ordering and packaging configuration (对比 ATSAMS70Q21A-CN)
设计说明
Base the PCB layout on the exact 144-LFBGA land pattern and ball map in the manufacturer package documentation. Preserve the prescribed ball-pad dimensions, solder-mask and paste rules, and routing clearances. Place decoupling components at the associated supply balls and provide a continuous, low-impedance ground distribution. Do not infer continuity from neighboring BGA locations because an unconnected or differently assigned ball can prevent startup, impair a peripheral, or damage the device.
Use the 1.08 V to 3.6 V operating range as the board-level constraint and verify every permitted core and I/O voltage combination in the electrical-characteristics tables. Confirm which rails can be tied together, their sequencing requirements, and the maximum ramp rate. Programmable supply rails should be validated with production-representative firmware so that debug interfaces, communications, and external peripherals do not receive out-of-sequence voltage.
Plan high-speed signals, clocks, and memory interfaces using the recommended topology and impedance rules for the selected package. Keep switching or high-current routing away from sensitive analog inputs, minimize return-path discontinuities, and provide unobstructed access for programming and debug signals. The 10 x 10 mm 144-LFBGA package has fine-pitch routing, so use the manufacturer design guidance and perform design-rule and assembly-capability checks before fabrication.
Do not treat ATSAME70Q20A-CN, ATSAME70Q20B-CN, or Q21-family devices as automatic substitutions merely because their headline core, memory, clock, and package specifications are similar. Compare every assigned BGA ball, power domain, peripheral function, interrupt vector, clock source, boot mode, and development-tool requirement. Firmware and startup code may also need revision-specific changes. Complete a hardware comparison, firmware port, regression test, and production risk review before approving any alternative.
合规信息
The product listing identifies ATSAMS70Q20A-CN as ROHS3 compliant. No additional REACH, halogen-free, conflict-minerals, or automotive qualification statement is established by the available information.