ATSAMS70Q20A-CN - 300MHz Cortex-M7 MCU | Microchip
MPN: ATSAMS70Q20A-CN ✓ 啟用中ATSAMS70Q20A-CN 概覽
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripheral interfaces onto one device. The ATSAMS70Q20A-CN belongs to the SAM S70 family and combines an ARM Cortex-M7 core with 1 MB of Flash and 384 KB of SRAM. Its 300 MHz operating speed positions it for demanding control, communications, and data-processing tasks rather than simple low-cost sensing nodes.
The principal device characteristics include a 32-bit ARM Cortex-M7 processor, a maximum clock frequency of 300 MHz, 1 MB of 1M x 8 Flash memory, and 384 KB of SRAM. The operating voltage spans 1.08 V to 3.6 V. These attributes give a designer ample memory for firmware, configuration data, working state, and protocol buffers while supporting a compact 10 x 10 mm BGA footprint.
The ATSAMS70Q20A-CN is identified as an active Microchip Technology product and is listed as ROHS3 compliant. Its package is a 144-LFBGA, and the exact ordering configuration is associated with tray packaging. One distributor listing reports a minimum order quantity of one and a lead time of 21 weeks, making early sourcing and production planning important for scheduled builds.
Typical engineering roles include industrial equipment control, embedded communications, data acquisition, human-machine interfaces, and connected industrial products. The 1 MB Flash capacity is useful for firmware and boot logic, while 384 KB of SRAM supports buffering and real-time workloads. Confirm the complete peripheral, pin, electrical, and software requirements against the manufacturer documentation before releasing a PCB or production design.
For a new layout, use the 144-LFBGA land pattern and pin-assignment information from the manufacturer documentation rather than inferring connectivity from a generic BGA library. Validate power, ground, decoupling, signal integrity, exposed-pad requirements, and programming or debug access on the assembled PCB. Firmware validation should also confirm startup behavior and peripheral operation across the intended voltage and temperature conditions.
This product record combines the exact manufacturer identifiers and distributor attributes with practical sourcing, packaging, layout, and replacement guidance. It also distinguishes documented facts from parameters that must be checked in the manufacturer datasheet, helping engineers make a technically sound decision without confusing a family-level MCU with a confirmed pin-compatible substitute.
直接替換替代品,適用於 ATSAMS70Q20A-CN — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: ATSAMS70Q20A-CN (相同外形與佔位) — 差異在於 Package, SRAM, Mounting Type, Processor Core, Product Type.
ATSAMS70Q20B-CN
✅ 直接替換📋 參考替代品(不在目錄中)
ATSAMS70Q21A-CN
✅ 直接替換聯絡詢價
查看資料表 →ATSAMS70Q21B-CN
✅ 直接替換聯絡詢價
查看資料表 →ATSAME70Q20A-CN
✅ 直接替換聯絡詢價
查看資料表 →ATSAME70Q20B-CN
✅ 直接替換聯絡詢價
查看資料表 →ATSAMS70Q20A-CN 最大額定值與電氣特性
| Product Type | 32-bit ARM Cortex-M7 microcontroller |
| Processor Core | ARM Cortex-M7 |
| Architecture | 32-bit |
| 最大時脈頻率 | 300 MHz |
| Flash Memory | 1 MB (1M x 8) |
| Static RAM | 384 KB |
| Operating Voltage Range | 1.08 V to 3.6 V |
| 封裝 | 144-LFBGA (10 x 10 mm) |
| 腳位數 | 144 pins |
| 安裝類型 | Surface mount |
| Packaging | Tray |
| Minimum Order Quantity | 1 unit |
| Reported Lead Time | 21 weeks |
| 生命週期狀態 | Active |
| RoHS 狀態 | ROHS3 compliant |
| Product Series | SAM S70 |
ATSAMS70Q20A-CN 144-lfbga (10 x 10 mm) 腳位配置指南
ATSAMS70Q20A-CN(144-lfbga (10 x 10 mm) 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: ATSAMS70Q20A-CN.
請參閱 資料表 以查看完整腳位配置。
典型應用
ATSAMS70Q20A-CN 適用於 6 應用s: Industrial Equipment Control, Embedded Communications Gateway, Data Acquisition and Monitoring, Human-Machine Interface Controller, Connected Sensor Node, Real-Time Control Platform.
Industrial Equipment Control
The ATSAMS70Q20A-CN fits industrial equipment controllers that combine real-time control with locally stored configuration, diagnostics, and communication software. Its 300 MHz ARM Cortex-M7 core provides substantial processing headroom, while 1 MB of Flash can hold application firmware and 384 KB of SRAM supports working buffers and control state. The 1.08 V to 3.6 V operating range supports low-voltage embedded architectures. In a production design, verify the exact peripheral assignments, power domains, environmental limits, and isolated communication interfaces in the manufacturer documentation before PCB release.
推薦
Embedded Communications Gateway
The ATSAMS70Q20A-CN is suitable for communications equipment that must combine protocol handling, packet buffering, and real-time control within one compact controller. The 300 MHz Cortex-M7 core can process communication workloads concurrently with supervisory tasks, while 384 KB of SRAM provides space for transient frames and state. Its 144-LFBGA package measures 10 x 10 mm, supporting compact board layouts. Before selecting it, confirm the required serial, Ethernet, USB, or other interface availability, pin multiplexing, clocking, and protocol support in the exact device documentation.
推薦
Data Acquisition and Monitoring
The ATSAMS70Q20A-CN can serve as the central controller in a data-acquisition or monitoring product where local sampling, filtering, logging, and host communication must be coordinated. Its 384 KB of SRAM accommodates working data and transfer buffers, while 1 MB of Flash stores firmware, calibration tables, and configuration data. The 300 MHz core offers margin for signal-processing tasks beyond basic acquisition. Engineers should verify ADC characteristics, timer resources, analog input limits, trigger capability, and data-rate requirements against the manufacturer documentation before committing to the device.
推薦
Human-Machine Interface Controller
The ATSAMS70Q20A-CN is appropriate for human-machine interface controllers that combine display updates, input handling, application logic, and system communications. Its 300 MHz Cortex-M7 performance supports responsive interface behavior, and 1 MB of Flash provides room for graphics support code, controls, and configuration. The 384 KB SRAM can be used for frame or touch-related working storage. A specific design must confirm whether the required LCD, touch, external memory, and display interfaces are present on the exact pin configuration and whether the 10 x 10 mm BGA can be routed with production-test access.
推薦
Connected Sensor Node
The ATSAMS70Q20A-CN can be used in a connected sensor node when local processing, protocol handling, and firmware extensibility are more important than minimum component cost. Its 1 MB of Flash accommodates a richer application layer, and 384 KB of SRAM supports sampling pipelines, sensor fusion, and network buffers. The 1.08 V to 3.6 V supply range can simplify integration with low-voltage power systems. Confirm the availability of the required sensor, communication, and low-power wake-up resources, and evaluate the current consumption in the intended operating modes using the manufacturer data.
推薦
Real-Time Control Platform
The ATSAMS70Q20A-CN is a strong candidate for a compact real-time control platform requiring more computation and memory than a basic low-end microcontroller. The 300 MHz ARM Cortex-M7 core provides performance margin for coordinated motor, motion, or machine-control tasks, while 384 KB of SRAM supports multiple control loops and 1 MB of Flash stores application code. The 144-LFBGA package permits a compact controller assembly. Final selection must verify timer resolution, PWM resources, capture channels, position sensing interfaces, interrupt latency, and timing guarantees for the specific control architecture.
推薦
推薦產品摘要
工程參考資料,適用於 ATSAMS70Q20A-CN — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ATSAMS70Q20B-CN | ATSAMS70Q21A-CN | ATSAMS70Q21B-CN | ATSAME70Q20A-CN | ATSAME70Q20B-CN |
|---|---|---|---|---|---|---|
| Package | 144-LFBGA (10 x 10 mm) | 144-LFBGA (10 x 10 mm) | 144-LFBGA | 144-LFBGA | 144-LFBGA | 144-LFBGA |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Product Family | SAM S70 | SAM S70 | SAM S70 | SAM S70 | SAM E70 | SAM E70 |
| Processor Core | ARM Cortex-M7 | ARM Cortex-M7 | ARM Cortex-M7 | ARM Cortex-M7 | ARM Cortex-M7 | ARM Cortex-M7 |
| Maximum Clock Frequency | 300 MHz | 300 MHz | 300 MHz | 300 MHz | 300 MHz | 300 MHz |
| Flash Memory | 1 MB (1M x 8) | 1 MB | Greater than 1 MB | Greater than 1 MB | 1,024 KB | 1 MB |
| Static RAM | 384 KB | 384 KB | 384 KB | 384 KB | 384 KB | 384 KB |
| Operating Voltage Range | 1.08 V to 3.6 V | 1.08 V to 3.6 V | 1.08 V to 3.6 V | 1.08 V to 3.6 V | 1.2 V to 3.3 V | 1.08 V to 3.6 V |
| Word Length | 32-bit | 32-bit | 32-bit | 32-bit | 32-bit | 32-bit |
主要差異化特點
- Targeted S70 family fit for real-time embedded control (對比ATSAME70Q20A-CN)
- Direct same-family revision path (對比ATSAMS70Q20B-CN)
- Greater memory headroom for expanded firmware (對比ATSAMS70Q20B-CN)
- Exact documented ordering and packaging configuration (對比ATSAMS70Q21A-CN)
設計說明
Base the PCB layout on the exact 144-LFBGA land pattern and ball map in the manufacturer package documentation. Preserve the prescribed ball-pad dimensions, solder-mask and paste rules, and routing clearances. Place decoupling components at the associated supply balls and provide a continuous, low-impedance ground distribution. Do not infer continuity from neighboring BGA locations because an unconnected or differently assigned ball can prevent startup, impair a peripheral, or damage the device.
Use the 1.08 V to 3.6 V operating range as the board-level constraint and verify every permitted core and I/O voltage combination in the electrical-characteristics tables. Confirm which rails can be tied together, their sequencing requirements, and the maximum ramp rate. Programmable supply rails should be validated with production-representative firmware so that debug interfaces, communications, and external peripherals do not receive out-of-sequence voltage.
Plan high-speed signals, clocks, and memory interfaces using the recommended topology and impedance rules for the selected package. Keep switching or high-current routing away from sensitive analog inputs, minimize return-path discontinuities, and provide unobstructed access for programming and debug signals. The 10 x 10 mm 144-LFBGA package has fine-pitch routing, so use the manufacturer design guidance and perform design-rule and assembly-capability checks before fabrication.
Do not treat ATSAME70Q20A-CN, ATSAME70Q20B-CN, or Q21-family devices as automatic substitutions merely because their headline core, memory, clock, and package specifications are similar. Compare every assigned BGA ball, power domain, peripheral function, interrupt vector, clock source, boot mode, and development-tool requirement. Firmware and startup code may also need revision-specific changes. Complete a hardware comparison, firmware port, regression test, and production risk review before approving any alternative.
合規資訊
The product listing identifies ATSAMS70Q20A-CN as ROHS3 compliant. No additional REACH, halogen-free, conflict-minerals, or automotive qualification statement is established by the available information.